After shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI just installed OpenSuSE 11 and after it was done installing and i rebooted, Windows doesn't show up on the boot screen I only get the default OpenSuSE and Fail Safe options.
All i know is that vista is on sda3 when i partitioned my drive. Here is my menu.lst entry for windows:
###Don't change this comment - YaST2 identifier: Original name: windows###
title windows
rootnoverify (hd0,8)
chainloader (hd0,0)+1
ok basically i have 2 hard disks one Seagate 500GB Sata, and one Western digital SATA my windows 7 is on the western digital and i think thats sda1, and opensuse is on the seagate the grub loader is on the western digital, and earlier today everything booted fine, till i went to boot windows
i had 2 "other" options, i selected the first one and it failed, the second other booted to windows, after about 3 hours on windows and doing nothing. i went to reboot and go to opensuse, and got a "grub loading stage 1.5., please wait" and it loads forever and nothing happens, it just idles im currently on the livecd just to get an operating system to use to get the net
I installed opensuse 11.2 today on my external hard drive and everything is running great, but I want to see if I can make a modification to the way my computer boots. I share this computer with others and they are not going to be happy to have to wait for the boot menu to start when they turn on the computer in order to choose which OS to run (Especially since if they do not make a choice it auto runs opensuse after a few seconds).
What I would like is if opensuse can be "out of sight, out of mind" and only load when I put in the live cd and then choose to boot from my external...... is it possible to do this?I am not a computer wizard and do not work in the industry.
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
I installed Windows 7 and then Ubuntu 10.10 64 bits. The Ubuntu installation went fine but when rebooting a "check disk" appeared and since then my PC keeps booting directly on Windows. I tried all the GRUB reinstallation methods of the GRUB2 Community Documentation with the live CD but none worked.
Below is the output of the Boot Info script found on several threads.
[Code]...
I used to dual boot Windows XP and Ubuntu for quite some time now. Yesterday after seeing OpenSUSE installed on my friends lappy, I decided it IS the time to bid goodbye to Windows. I don't play games, just internet browsing, listening to music, some letter writing and movies of course!
So today I removed Windows XP by formatting C: drive and installed OpenSUSE.
I am happy with OpenSUSE, but I still want to dual boot OpenSUSE with Ubuntu. But in the GRUB,only OpenSUSE entry is shown, Ubuntu is nowhere. It seems OpenSUSE has overwritten the Ubuntu GRUB during install and doesn't include Ubuntu in the boot list as Ubuntu does for other OS when we install Ubuntu.
How to create an entry in the GRUB so that I am able to boot into Ubuntu also.
There are several posts here about not being able to boot without the install disk, which is also my case. I imagine the solution for me should be easy, because I only have a single installed OS on this machine, which is a MacBook Pro 2.1. Here's the result of fdisk -l:
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[Code]...
Partition table entries are not in disk order sda4 is a partition that did not appear in the partition overview when I installed the operating system. I thought I'd look for help here while I continue to research the problem myself.
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I could upgrade openSUSE 11.4 on my desktop but when trying to do the same procedure on my girlfriend's laptop, after the zypper update part (and the reboot asked), now we can get it to boot.
After selecting suse from GRUB it shows some code (too fast to be read) then black screen forever. I erased the VGA option before booting and now it gets stuck in
Code:
[0.490266][<c02037a6>] kernel_thread_helper+0x6/0x10
We don't have any idea of what to do ;__;
I was foolishly messing around with Grub trying to get it so it only show my two most recent kernel versions of Ubuntu and Windows 7. The tutorials on how to do this were not clear, so I deemed it not a big deal and ultimately didn't end up making any changes. However when I restarted to boot into Windows 7 it was gone for Grub's boot list. I looked at the grub.cfg file and in it under os-prober, where i'm assuming Windows 7 should be there was only Vista (which wouldn't boot when I tried it, just a black screen). I had upgraded from Vista over the internet when Windows 7 first came out, then installed Ubuntu and it worked fine until this. I am using 64-bit Ubuntu 9.10, and have Grub 1.97 beta~4 installed, which was installed with Ubunutu.
View 9 Replies View RelatedI Currently am running Ubuntu 10.10 on a hard drive with three partitions. One with Ubuntu, a Media partition (Music, Videos, pictures, etc.) and the last is my Windows 7 installation. I can acess all of these partitions in nautilus as well. However when I start up my computer it automaticly loads into Ubuntu and when I manage to see Grub I only see 3 Entries Which are the Ubuntu kernel, Ubuntu recovery Kernal and memtest86+. How do I make Grub recognise my Windows 7 Installation?
View 9 Replies View RelatedI installed Fedora 14 alongside windows, overwriting my old Ubuntu 10 partition. Unfortunately, now the GRUB loader only recognizes my Fedora partition and the built-in windows recovery utility partition. I checked the disc utility and my windows partition still definitely exists, I just can't seem to boot into it.
View 7 Replies View RelatedI am trying to triple boot osx, win7 and ubuntu 10.10 on my macbook pro. This is the way I did it:
-Installed osx and created 2 partitions in disk utility, one for osx and another formated as dos fat to manually hybritized my drive and allow for windows installation (the new bootcamp is currently messed up, so can't do it that way).
-Installed win7 by bio booting the cd, and deleting the formatted partition (dos fat) and creating a new one via win installation.
-Installed ubuntu by bios booting the cd and creating its own partition in setup.
Now, when I turn on my macbook and press alt, 2 icons come up, mac and windows (so good so far!). But when I go into the windows option, grub loads and I see 5 entries:
-Ubuntu
-Ubuntu safe mode
-Memtest
-OSX 32 bit
-OSX 64 bit
Obviously osx is not going to boot under bios boot. But where is win7 that should be in the list?
Two days ago i turned on my pc and suddenly there was a message:"Minimal Bash-like line editing is supported.For the first word,TAB lists possible command completions.Anywhere else TAB lists the possible completions of a device/filename.ESC any time exists...
When i googled this message it came out that this has got to do with linux (i have never used linux and i formated my disc once or twice since i bought it so i found it very strange that this problem is related to linux).Anyway,i found out that grub is the problem and that it isnt a big deal to solve it.I downloaded Ubuntu,booted it from the cd and followed the instructions...I typed in grub (in the terminal) and it told me to download it so i typed in "get-apt grub install" or something like that and it all went well,i was now in the grub directory.Then i typed " find /boot/grub/stage1" and it told me that the file was not found.
I have tried everything,i have downloaded the super rescue cd the fix the problem but i have still the same problem.
I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?
View 2 Replies View RelatedDual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies View RelatedI am working with a acer netbook that I originally had WinXP installed on. I downloaded Ubuntu 9.10, transferred the iso contents to a bootable USB drive and installed Ubuntu. I remember during the setup process that I made sure I chose the option to install on one partition. There is only one partition on my netbook with a small second partition as a swap.
After the installation process and reboot I noticed the grub menu would pop up every boot up giving the list of operating systems of which XP was included. I then ran the update manager and updated 9.10 with all updates. After rebooting the grub menu again showed but the option to choose XP was now gone.
Now everytime I boot up the grub menu shows. How can I modify grub so it will automatically just boot to the OS.
I just got a Zino HD from Dell, and was planning to use it connected to my TV, dual booting Xubuntu 10.04 and Windows 7. I did, however, run into some issues. I suspect I'm just going to have to burn a restore disc and start over, but I'd like to fix this if possible. Here's what I had to start with:
1 vfat partition (bootup?)
1 dell restore partition
1 Windows partition
Because the restore partition was a bloody 20 GB, and I could always get the restore done via disc, I reformatted it as ext4 and used it as "/". I then shrunk the Windows partition and allocated a home partition and some swap space. Note that immediately after the installer, I reformatted the home partition manually with an inode size of 128 to use with the Windows ext2 driver, but that shouldn't have really changed anything. End result file system order:
1 vfat
1 ext4 mounted as "/"
1 Windows
1 Swap
1 ext3 mounted as "/home"
I now have two problems:
1) I do not get any GRUB menu at all! It just boots directly into Xubuntu with no choices (not even memory test or restore mode).
2) I, obviously, can no longer boot Windows.
Keep in mind that this a fresh install on a brand new machine; I can't think of any reason GRUB wouldn't even show me a menu.
Since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies View Relatedi just installed openSUSE on my machine which had windows 7 in other partition as primary partition. Now after rebooting i see the green screen showing only 2 options
-Desktop -- openSUSE 11.2 -***
-Failsafe -- openSUSE 11.2 -***
how do i get my windows 7 in the list.
I've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies View RelatedI need some help since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 4 Replies View RelatedI virus got my XP installation this morning. I have to install it. When I install windows it will write over the GRUB and I will no longer be able to re-boot my openSusie OS. My question is After XP is installed is there a way to re-install GRUB without having to re-install openSusie 11.2?
View 9 Replies View RelatedI am using Fedora 10, and was wondering if it is possible to install Windows XP on a free partition, without it replacing the GRUB boot loader?
View 6 Replies View Related
