am doing an install of a tar.gz file and i am installing it using terminal i have downloaded some files i needed to complete ./configure but when i type make or make install it returns this
make[2]: *** [wordcompletionwidget.o] Error 1
make[2]: Leaving directory `/home/Rob/Downloads/kmouth-1.1.0.tar/kmouth-1.1.0/kmouth/wordcompletion'
[code]....
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies View Relatedi try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
I am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
View 3 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedI'm trying to install amarok from git but I keep getting this error:
[code]...
I thought libXext provided shape.h but I have both xorg-x11-libXext and xorg-x11-libXext-devel installed.
[code]...
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
View 3 Replies View RelatedI've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
View 1 Replies View RelatedI tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:
md0 /boot
md1 /
md2 swap
or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)
I am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
I have an iMac, and i'm trying to setup a triple boot(Mac, Windows, Linux).
I used rEFIt and GParted to boot and create the partitions for the openSUSE.
But when I try to install the openSUSE 11.2, in the installing process, it came up "error messages".
The error messages are like: cannot download xxx files. or file have been edited by someone and is not save to install.
Btw, can i boot openSUSE from a usb linked external hard?
I'm trying to do a new net install on my laptop. I can boot into the installation kernel and I enter the http server: (download.opensuse.org) and the folder: /distribution/11.2/repo/oss. The installation proceeds to "System Analysis" and continues 90% of the way to "Build Repository" At this point, I am greeted with a red dialogue box which says: An error occurred during the installation.
View 5 Replies View RelatedWhen I want upgrade and/or install any package from software.opensuse.org I've got error, "Couldn't find XML file" or anything same this.
View 4 Replies View RelatedThings were running fine until GNOME misbehaved;
GNOME failed to load telling me:
Install error, Configuration defaults for GNOME power manager have not been installed correctly.
So I
Code:
To the shell and check the logs in gdm and find this:
Could not ask power manager if user can suspend, launch helper exited with unknown return code 0.
So I try
Code:
To see if another user will get the desktop; I get the error
Cant create etc/passwd no space left on device.
So I
Code:
And get the following
I insert a usb drive to prepare for back up; Run
Code:
On the shell to get the usb device name; Then run
Code:
To mount the device.
I end up with:
Cant create lock file /etc/mtab~ 4610 No space left on device(use -n flag to override)
So, I
Code:
And see 9 partitionitions
Code:
Again to check which ones are loaded at boot up time and get
plus some other file systems mounted at boot up, but not mapping to any physical partitionition.
I try
Code:
On partition9 and get warnings because its mounted, so I chicken out and try
Code:
And run into the error:
cant create lock file /etc/mtab~4832 no space left on device (use -n flag to override)
Good thing is there is a
Code:
Since space is a problem, I
Code:
On partition6 which is not mounted at boot up time and try to
Code:
I still get the error
cant create lock file /etc/mtab~4735 no space left on device (use -n flag to override
Code:
For package update tells me
cant open /var/run/zypp.pid in mode w
Code:
For power management tells me its not even recognised as a command.
I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
I tried to install openSUSE 11.3 from the Gnome live CD. I have two disks in my system, one with a Windows Vista x64 install, and another with a Vista x86 install which I no longer need and quite a bit of free space. I want to install Linux on it. I switch OS's by switching the boot disk in BIOS, so I don't really need a boot manager, but openSUSE installs GRUB by default, so I used it.
The Vista x86 partition is a primary partition at the start of the disk, and after it there's an extended partition with quite a few logical partitions. At the end of this extended partition I added partitions for swap, / and /home (ext4 all), and a new primary partition at the end for /boot. (I actually created these for a failed Linux Mint install, but I used them and reformatted during the openSUSE install.)
I made the Vista x86 inactive and the /boot partition active, and this works. At least, I get as far as seeing a menu which I guess is GRUB. Before that I get "Error 22: No Such Partition". If I choose openSUSE from the GRUB menu I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
I booted from the live CD again and checked the /boot, / and /home partitions, and they contain data, so they must be formatted fine.
i used the terminal command: 'wine /media/INSTALL/install.exe' and I got "Please insert the CD labelled 'install Disc'" (even though the install disc was in the drive. I even tried the other discs. I tried searching another thread on another forum where a Fedora user had the same problem, which was solved, but it doesn't work for me for some reason.
View 2 Replies View RelatedOkay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedThis is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:
- Unknown error reading from 'http://download.opensuse.org/update/11.4/'
- SKIP request: User-requested skipping of a file
- Download (curl) error for
[code]...
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedEvery single image i try from opensuse 11.2 on usb stick i have the same error: No devices matches MBR identifier "hex number" Before asking me for fdisk or whatever, my MD5 sums are all right and i tried both unetbootin and "dd if=path of=usb_path" methods.
View 1 Replies View RelatedI installed OpenSUSE 11.2 yesterday using the GNOME live CD. I did installed some software trying to get my wireless to work (broadcom-wl and the kernel module).Now, when I try to click on ' Install Software' option in the menu the following warning appears:"There was an error in the repository initialization.
'repo-oss': [|] Valid metadata not found at specified URL(s)
History:
- Can't hardlink/copy /var/adm/mount/AP_0x00000001/suse/setup/descr/non_oss-11.2-20.22.1.i586.pat.gz to
[code]....
my desktop has two hdd(sda+sdb recognized as (hd1)and (hd0)respectively..)sda has vista on it. sda is comprised of several simple volumes which vista calls dynamic ntfs..sdb has four primary partitions: sdb1; sdb5,sdb6, sdb7. sdb5,6,7 are extended partitions,together put as sdb2.
sdb5 for swap, sdb6 for (/)(does this mean root partition? but /root and /home are on the same level..), sdb7 for /home; this is suse 11.0.I delete the last simple volume of sda, and divided it into three partitions: sda8,9,10. sda8 for swap, 9 formatted as ext3 for /home, 10 formatted as ext4 for /.And I want to keep the current grub, so I chose the boot loader location to "Boot from Root Partition" in Boot Loader Settings. At the last minute of installtion, a dialog tells me:
Code:
grub> setup --stage2=/boot/grub/stage2 --force-lba (hd1,9) (hd1,9)
Error 22: No such partition
grub>quit
(hd1,9) is surely sda10 which is mounted to '/'. why would grub not recognize this partition?
This error message always shows up whenever I boot to "rescue installed system" from dvd and try to reinstall grub to root partition, ie. (hd1,9). I tried to put one entry in the menu.lst of suse 11.0 :
Code:
title openSUSE 11.2
rootnoverify (hd1,9)
chainloader +1
But instead of boot into 11.2, it gives me a message "No such a partition"Until now the only successful boot into suse is through the dvd rescue mode-> boot into installed systems. later tries all failed.. with a message "modprobe: FATAL: Could not open.ko", the screen freezed, number led indicator and caps lock led both flashing on and off. I had to press the RESET on the box..
the good thing is suse 11.0 is still bootable, the current grub not crumbled..but the strange is grub cannot be installed. maybe it's due to ext4 format? In 11.0 if I try to mount /dev/sda10 to /mnt, it would say unknown file system 'ext4'.
