Every single image i try from opensuse 11.2 on usb stick i have the same error: No devices matches MBR identifier "hex number" Before asking me for fdisk or whatever, my MD5 sums are all right and i tried both unetbootin and "dd if=path of=usb_path" methods.
View 1 RepliesI am certain that the problem is not with the CD. It can boot on my laptop. It's the RC2 of OpenSuse 11.3 Gnome. When I try to boot on my PC, I get the error "No devices matches MBR identifier: 0x502eadc3".I had some problems when installing Ubuntu, with HDD partitioning because it's SATA3. I tried several things, chandged from IDE to ACHI in Bios, then after it didn't work I simply plugged out all of the Sata cables but still the same. It should be because of Bios settings I guess.I have Gigabyte X58A-UD3R mainboard. Please help, I really love OpenSuse
View 5 Replies View RelatedI've made a bootable USB with 10.3 live CD. I can boot successfully using a 10.3 live CD as long as the USB stick is not plugged in, but if I try to boot from the USB stick, or from the CD when the USB stick is plugged in, I get "No devices matches MBR identifier: !" where the bit after the colon is 2 spaces followed by the exclamation mark. I've seen this message reported elsewhere but never with a blank for the MBR id.I'm running on a Dell Insprion 9100 with 1.5G RAM.
View 2 Replies View RelatedI have a little problem installing src2pkg on my linux from stratch system.
I downloaded the package and saved it on /
After that I did cd /usr/libexec/src2pkg/src2pkg-helpers
There I did a sh src2pkg.setup
But now I'm getting this error message :
/usr/libexec/src2pkg/13-make-description: line 438: 'read_pkg_info_desc : not a valid identifier.
Do anyone have any idea what went wrong ?
I was going through this Lex/YACC tutorial: [URL]... and I was working along with it. The Lex examples worked fine, but the YACC one quit white compiling
[Code]...
I have installed php-devel successfully prior to go with the installation (yum install php-devel). Here is what I did;
1.wget "url
2.tar xjvf ffmpeg-php-0.6.0.tbz2
3.cd ffmpeg-php-0.6.0
4.phpize
5../configure
6.make
7.make install
code....
In both CentOS 5.5 and FreeBSD 7.4 when I use
Code:
snmpget -v 1 -c public windows_host system.sysDescr.0
I get the remote windows machine system description just fine. But not in ubuntu.
Searching snmp-net FAQ for the erroe message "Unknown Object Identifier", I got this to work around
Code:
snmpget -v 1 -c public 127.0.0.1 SNMPv2-MIB::system.sysDescr.0
But it not worked either.. Searching "MIB" using apt-file search, I installed "snmp-mibs-downloader", and now
Code:
snmpget -v 1 -c public 127.0.0.1 SNMPv2-MIB::system.sysDescr.0
works.. but
Code:
snmpget -v 1 -c public windows_host system.sysDescr.0
still breaks..
Why it works in CentOS and FreeBSD but not in Ubuntu?
I got some error in make
Code:
bash-4.1# ./configure
checking for a BSD-compatible install... /bin/ginstall -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
[code]....
how can I generate unique identifier on centos 5.x I read some thing about using utility such as uuid or uuidgen
View 1 Replies View RelatedI am looking to understand what would be the optimal or standard way to create a unique id for music files. Something like md5 sum, but taking into consideration that the music files contain some metadata that can be changed.At the end of the day I would like to create a backup database containing all my ratings for the songs. It should be independent from the filename and location.I have seen the libofa, but there does not seem to be much information about it. It is integrated into some GUI tools including Amarok, but they do not do what I want. PUID from Musicbrainz is explicitly closed source based.
View 1 Replies View RelatedI tried to load a simple driver program. I am using RHEL5. When I tried to compile my 'driver.c' program it shows the following error:
[root@jameslee ~]# gcc -c device.c
device.c:1:25: error: linux/module.h: No such file or directory
device.c: In function 'init_module':
device.c:6: error: 'KERN_INFO' undeclared (first use in this function)
device.c:6: error: (Each undeclared identifier is reported only once
device.c:6: error: for each function it appears in.)
device.c:6: error: expected ')' before string constant
device.c: In function 'cleanup_module':
device.c:12: error: 'KERN_INFO' undeclared (first use in this function)
device.c:12: error: expected ')' before string constant
-bash: export: `/usr/java/default': not a valid identifier messages when we login as root to one of our server. This started occurring after a consultant installed software on the server. I have looked around in .bashrc, etc. for the error path so I can remove it, but can't seem to locate it. Does anyone have any tips on how to locate script line where this is being included, and/or trace the login procedure to find the culprit?
View 7 Replies View RelatedI need to redirect h[URL]But when it gets [URL]eans it's not redirecting with identifier "redirectUrl=".How to rewrite to that as well
View 1 Replies View RelatedI am using Firefox-4.0b9 from /testing. I never deleted the old profile from 3.6x days. I just noticed that the Slackware identifier icon is now just a generic Linux icon. I checked in about:config, and the general. useragent.extra.linux string is still set to Slackware Linux.Is there something different to do for FF-4x? This isn't a real problem, just an annoying matter of pride.
View 14 Replies View RelatedAfter several crashes during videos it seemed like a good idea to fsck root. Downloaded the latest systemrescuecd and ran it at boot. The error message was 'bad magic number, corrupt superblock' with a suggested command to try another superblock. That failed with the same message. Tried tune2fs to force fsck at boot and got the same message. The drive is less than 6 months old and the installed system is working more or less ok. The command I used was 'fsck.ext4 /dev/sdc2'. What am I doing wrong?
View 9 Replies View RelatedI have 3 disks in my PC which are partitioned equally as I use them for Raid 1.The first partition on every disk is a simple ext2 partition for booting. No Raid there. So I mount them as /boot and /boot2 and /boot3. So I can backup my /boot to the other boot directories. That worked for some month and this morning I just want to look if all directories have enough free space left. So I did a df -h and got this:
Code:
Dateisystem Grove Benut Verf Ben% EingehÃĪngt auf
/dev/mapper/system-root
6,0G 301M 5,4G 6% /
udev 1,5G 292K 1,5G 1% /dev
/dev/sdb1 122M 29M 87M 25% /boot
/dev/sdc1 38M 21M 16M 59% /boot2
...
/dev/sda1 122M 29M 87M 25% /boot
As you can see /dev/sda1 and /dev/sdb1 are both mounted on /boot
Here is what mount says:
Code:
/dev/sdb1 on /boot type ext2 (ro,acl,user_xattr)
/dev/sdc1 on /boot2 type ext2 (ro,acl,user_xattr)
...
/dev/sda1 on /boot type ext2 (ro,acl,user_xattr)
This is no Problem for me as I could just remount it correctly, but I would like to know if this problem is known. I did not change anything by now and this PC is a server which is running 24/7, so I can deliver more debugging Information if someone is interested.
When I reboot, USB keyboard acts just fine for GRUB. Once SUSE begins to boot, I lose the keyboard (numlock light goes off too). Cannot press ESC to watch the boot sequence. Then, at login, there is no mouse or keyboard for about 60 seconds. Then suddenly, they both become active. Why did this start happening?
It has been about a week since my last reboot, so there's been a few config changes and patches, so it's going to be hard to narrow down a culprit. Thought USB configs in /etc/fstab was the problem, but still happening after rolling back changes to a known good config. Re-ran SaX2. Mouse and keyboard look good in the config file. Also, have otherwise healthy USB behavior with thumb drives and in VirtualBox machines. It just acts goofy at boot time.
i'm using opensuse 11.3... sometimes i listen to a music from videos.. but, when i switch to another console (ctrl+alt+f1-5), music stops.. why? what will happen with other applications (database, etc) that work in a background?
View 6 Replies View RelatedAfter a few tribulations, I managed to get VMWare server installed. The only problem is that it will not recognize any usb devices. I installed usb in the virtual machine using the VMWare interface and in preparation for that, I followed the instructions in the tutorial to the letter regarding fstab and the vmx file. Supposedly, at least according to Windows control panel, the usb controllers and interfaces are installed. The VMware web interface says the same thing. However, neither the Device tab on VMWare nor VMware Tools show any usb devices. The usb devices - a printer, removable drive, and magicjack - are all recognized by Linux. How can I get the virtual Windows machine to recognize the devices?
This is crucial since my major use for it is to run the magicjack which is not supported in Linux.
How to locate usb devices before the process of installation?
View 2 Replies View RelatedI want to use old devices names eth0, eth1 etc. instead of default OpenSuSE (11.1)eth_s0_0 etc. There is no firewall, no devices management via NetworkManager, static IP address.
1) to edit /etc/udev/rules.d/70-persistent-net.rules and insert eth0ð1 instead of eth_s0_0 & eth_s0_1
2) To rename /etc/sysconfig/network/ifcfg_eth_s0_0 ( and s0_1) to ifcfg_eth0 and ifcfg_eth1 and then reboot ?
Trying to install on a: Dell Precision T3500 OpenSuse 11.3 keeps showing the following message:
"Make sure CD number 1 is in your drive"
I ordered the DVD from the OpenSuse site, so they ARE NOT burned copies. I also tried burning images, the same problem happens. No matter what I do, it does not go beyond this message.
I have a non-super user on my box which I'd like to give it MOUNT and UMOUNT permissions but I don't know how.For example purposes, the user name is "USER".I don't want to make it into a SuperUser, just give it rights to be able to issue the MOUNT and UMOUNT commands at the terminal.
View 6 Replies View RelatedIm considering installing Open Suse linux on my laptop - Lenovo Thinkpad T510i. Will all the devices be recognized?
View 2 Replies View RelatedI am trying to write a script to modify /etc/fstab that will add entries for a number of partitions on different disks.
The only thing that I do not know how to do is to obtain a unique id such as the ones in /dev/disk/by-id/ to address by from a given partition (ie /dev/sdb1). In my fstab I noticed that in installation the system added fstab entries that are unique (in /dev/disk/by-id/)
I could simply do /dev/sdb1 and so on, but I would prefer a unique identifier so that each mount point is tied to a partition on a specific and unique physical drive.
i need this to be script-able if possible, if not I would still like to know.
I tried ubuntu for a few weeks, but I couldn't get the nvidia drivers to work, I tried everything. So, I got sick of that, and went to download OpenSuse, which seems to be even nicer (..... ) I downloaded the 11.1 liveCD (gnome) from here. I nicley got the welcome screen, and the option screen (liveCD, check errors etc.). I chose LiveCD and it started booting, I got the splash screen with the loading bar, and after it completely loaded, the screen turns black with a lot of messages and at the end:
Code:
GdmLocalDisplayFactory: Maximum number of X display failures reached: Check X server log for errors.
Great, I hoped for better luck after Ubuntu..
My sys. specs:
Asus F3Sc 32bit
Intel CentrinoDuo
[Code]...
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
View 4 Replies View Relatedi try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
I am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
View 3 Replies View Related