Yesterday, after I reinstall suse linux enterprise 11 in my note book. I got some error messages. They are : From Suse linux installing processedacroread-9.3.2-0.1.1.i586.rpm yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm After installed suse linux. error messages for all options in yast2.
The story is when I started installing suse linux, I checked first the live cd and I got message that live cd is okay. But, when the installation process was running, I got 2 messages error. But, the messages were informing me to verified from software management module.
So, my questions are :What are acroread-9.3.2-0.1.1.i586.rpm and yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm and what are they fungtions? If my guess is not wrong, acroread means acrobat reader. Is it true? Where is others place I can download them (no.1,2,3) beside the live cd? Or, if the easyest way is live cd. As yast2 got error, is there an other way I can installed them (no.1,2,3)?
Using 11.4 I noticed a couple of messages I have not seen before:-
Code: <5>[ 14.485094] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it <5>[ 14.485098] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
My machine is a TP T42 but should I try and od anything about this message or just ignore it?
Every boot, I see screenfuls of staprun error messages fly by, e.g from /var/log/boot.msg:
Code: <notice -- Aug 31 23:39:53.511288000> service boot.startpreload startstaprun:send_a_relocation:336: ERROR: reloc name too long: .gnu.linkonce.r._ZN6AsicNII18ucode_class_caymanE23NITiling ModeLookupTableE: No such file or directory
Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. I wanted to attach the log files; YOUR FORUM RULES WOULD NOT ALLOW ME TO AS IT SAID FILES TOO LONG!
My memory could be failing but I thought there was a tool, possibly in Yast, to access the boot logs in earlier versions. Can't find it now though. Is there such a tool other than console?I should clarify in case I am using the wrong terminology that I seek the log which scrolls up the screen during the booting process. Reason is that I see several errors and warnings there and wish to investigate further.
So I'm using opensuse 11.2 and recently installed ubuntu 10.04 to a different partition and all went well. when I boot opensuse I get a lot of interesting messages yet everything seems to load fine and I've not noticed anything behaving differently. I checked the boot log via
Code:
Looking through it i did see a line in there that looked familiar from the boot up and it is
What i'm trying to accomplish seems rather silly but is needed for my little project here.
I'm using OpenSuSE 11.2 as a media center PC and need it to login automatically(console not X). That one i accomplished without problems.
However, after login i can see all the info about the services that were started and that needs to "go away".
One could do a "clear" in the .bash_rc and or .bash_profile but it will still show the login prompt which i don't want to see either (i don't even want to see the blinking cursor as well).
Question: How do i accomplish that so that the login console shows only the "splash screen" without any output of the kernel,rc.status nor the "issue-file"... just a plain blank screen ?
I just upgraded an 11.1 install to 11.2. The upgraded system appears fully functional but I get many "all config files need .conf" warning messages during boot. See below. I also did a clean install on another system to compare and the clean install does not exhibit the same behavior so the warnings are evidently related to it being an upgrade. The system's working but I would like to understand why this is happening and clean it up. This system provides some key services to my networks and I have spent a lot of time getting this and the systems it interacts with "just right" under 11.1 and I am not particularly interested in starting over except as a last resort.
everytime I try to shutdown/reboot, it gets to the screen where it has the green/bold status messages on the side, but then it simply stops. The cursor doesn't blink, nothing happens...you could wait 10 minutes, and it would still be at that same screen. I don't know if I've described this well enough for anyone to understand, but I hope so! I don't have a camera, but if I did...I'd post a picture of where I mean...
But like I said, after getting to a certain, without actually shutting down, it simply stops and does absolutely nothing. This is rather inconvenient, and I'd like to find a solution to this if possible. EDIT: I'm sorry I didn't provide any hardware info, but I'm using Gnome...This didn't happen 100% of the time KDE like it does now though. (But it DID happen in KDE as well) I'm using OpenSUSE 11.2... I'll be back in a moment with hardware info, assuming it may aid in a solution.
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
I am trying to install PDFedit however after un-zipping and running configure at the end i get this message:checking whether we want to prepare pdfedit-core-dev package... no checking whether we want to build PDFedit gui... yes configure: error: QTDIR environment variable must be set
I am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
I've just installed 11.2 Gnome 64 bit and after applying the updates and when it gets to finding server it says all are too slow and I get this Error 5:Connection too slow... no server available, aborting. I hit ok and it disappears.
I tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:
md0 /boot md1 / md2 swap
or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)
I'm trying to do a new net install on my laptop. I can boot into the installation kernel and I enter the http server: (download.opensuse.org) and the folder: /distribution/11.2/repo/oss. The installation proceeds to "System Analysis" and continues 90% of the way to "Build Repository" At this point, I am greeted with a red dialogue box which says: An error occurred during the installation.
I have a number of applications (Evolution, Openoffice Writer & Calc, Firefox) that are popping up an error message when I close them, but the window snaps closed before I can read the message. The applications run fine as far as I can tell. how to slow or pause the error message so I can figure out what's going on.
I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have; - Intel Pentium Dual Core processors - Asus motherboards - Onboard VGA, Sound, NW - 2 GB DDR2 RAM - 80 GB SATA HDD code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
am doing an install of a tar.gz file and i am installing it using terminal i have downloaded some files i needed to complete ./configure but when i type make or make install it returns this
