Ubuntu Installation :: Bootloader Fails After Reboot After Installation

Mar 29, 2011

I installed Ubuntu 10.10 amd64 (and tried 10.04.2 as well) from Wubi under Windows 7 64-bit. When I reboot after installing it through Windows, I go to Ubuntu and the installation completes. Then it reboots again to finish the install of the OS. When I boot into Ubuntu now, grub does not appear. Instead, some initramfs stuff comes up in a console with no GUI and says some error stuff about root devices. I read that grub updates cause problems, but the installation never finished and therefore I was never able to go into Ubuntu to lock grub packages, etc. I've run into this error on multiple fresh installs.

View 1 Replies


ADVERTISEMENT

Fedora Installation :: No Grub Bootloader On Reboot

Nov 2, 2010

Just got done installing F14 64 and all went well however when I rebooted the machine it boots straight into windows, where is my GRUB boot loader? Only one drive in this machine (sda) and I remember going through the GRUB settings during the install. How to get a bootloader working now because in my linux experience (since RH5) it has always just installed the bootloader and worked. Apparently ext4 is bunk for me and when using LVM settings. I am up and running and grub is working.

View 2 Replies View Related

Ubuntu Installation :: 10.10 Install Fails On Bootloader

Jan 6, 2011

I'm trying to install 10.10 x32 server, on a machine with the HW Raid-5. And install fails on Bootloader setup :/, so I continue with installation, and everything finishes fine.When machine boots, it obviously (since grub failed to install) says insert bootable media, and press any key. So I boot from the CD, goto rescue mode, installer environment:

>>mount /dev/mapper/server-root /mnt
>>grub-installer --root_directory=/mnt /dev/mapper/server-root
Wrong number of args: mapdevfs <path>

I tried to install OS multiple times, from full automatic HDD partition setup, to manual, and it always fails to install grub . I can mount, read/write /dev/mapper/server-root partition, and the contents of the partition looks like a valid OS.

View 3 Replies View Related

Debian Installation :: Bootloader Doesn't Show After System Reboot

May 9, 2015

I wanted to switch to Linux from Windows so I decide to install Debian. The installation completed successfully but after that the bootloader doesn't show after the system reboot. So it is just black screen. I have an option for booting Debian (which will go to a black screen) and go to command line which looks like command prompt in Windows. I tried going to the command and it shows

grub>

I don't know which command to input since I'm a newbie and not familiar with Linux. I installed Debian from USB using unetbootin. What I should do to successfully install Debian?

View 8 Replies View Related

Ubuntu Installation :: Installation Fails Every Time - Message To Reboot My Computer Appeared At The End

Jan 9, 2011

I recently decided to install ubuntu netbook remix 10.10 to my Toshiba NB200. I was using windows and I wanted to completely erase them. I burned the USB, I followed every single instruction the site had, and even though the installation seemed to work, and a message to reboot my computer appeared at the end, the installation finally fails. When I reboot, the only thing I get is a black screen with an underscore at the top left corner. I tried the installation four to six times and even tried older versions as well but all I get is the black screen.

View 9 Replies View Related

Ubuntu Installation :: Clean Install Fails To Reboot

May 18, 2010

I'm installing 10.4 x64 on a Dell PowerEdge R610 in a RAID 1 configuration and the install goes fine until I have to reboot the server to finish the install. On reboot after about a minute it gives the error.We've tried letting GRUB manually configure itself at the end of the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.In the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same.I've got 3 of these server to get setup and running as part of our back end and network restructuring and have been stuck at this point on the first one since Friday.

View 9 Replies View Related

Fedora Installation :: Reboot Fails F12 Upgrade

Jan 4, 2010

I am trying to upgrade from F11 to F12.Using Preupgrade, everything went well and then it asked me to Reboot. Anaconda started then says something about updating some files then the screen goes blank.

View 14 Replies View Related

OpenSUSE Install :: System Reboot Fails During 11.3 Installation

Aug 3, 2010

I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.

So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.

I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :

Memory tests are OK.

View 5 Replies View Related

OpenSUSE Install :: HP Tx2525nr Install Fails On 1st Reboot After Installation?

Jan 26, 2010

This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?

View 1 Replies View Related

Ubuntu Installation :: Grub Installation And Revert To Windows Bootloader?

Feb 22, 2010

i've been using ubuntu with wubi, and I'd like to install it on my new hard drive (so windows is on one hdd and ubuntu is on another). afaik, grub will be installed on the hdd w/ ubuntu, and i have to set it to recognize the other (windows) hdd. assuming that i want to get rid of ubuntu and just use windows, what steps do I have to take to do so? (if grub is only on the ubuntu hdd, then would I just have to format it?)

View 2 Replies View Related

Debian Installation :: Install Grub On Master Bootloader / If Installation Is Going On Separate Hard Drive?

Feb 5, 2010

I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.

View 6 Replies View Related

Ubuntu Installation :: Bootloader Popup And No Installation

Jan 9, 2010

I've recently installed an Ubuntu Netbook Remix on my netbook and I'm trying the same on a desktop with a desktop distribution. I've a strange issue : I get to the start menu with the "Try ubuntu", "install ubuntu" and so on.

When I choose try I get a popup with title "Boot loader" containing the word "live". When I choose to install, I get the same popup with "live-install" as content. I don't find much on the web.

View 1 Replies View Related

OpenSUSE Install :: Bootloader Fails To Install(grub Cannot Install Bootloader)?

Nov 7, 2010

I have a major problem installing opensuse 11.3 on my computer( hp pavilion dv6).I downloaded openSUSE-11.3-GNOME-LiveCD-x86_64 from software.opensuse.org: Download openSUSE 11.3 and made a live usb.I'm a newbie at using linux infact i never used another operating system beside windows.Now i have installed windows 7 (on c disk 100gb).My first problem when i am trying to install opensuse is that he dosn't automatic choose to make my partitions so i have to do it manualy.I was searching how to make it the best way so i desited to make 4 partitons one for ' /boot' one for ' / 'one for '/home' and a swap partition/In windows7 i made 4 new partitons

3:10 gb for /boot
4:10 gb for/
5:70 gb for /user
6:10 gb for /swap

My first question is :Is this right to make 4 paritions in windows (opensuse can't format or resize my partitions it just can edit it ) so it's my only way to make partitions( If this is wrong how can i make partitions then)

My second question is how to change the bootloader configurtation because everytime when ii try to install opensuse it stops at about 96% and it says to reconfigure the bootloader options.

If i skip this i get the folowing message

=== System Checking ===
Checking for /usr/bin/chroot binary... Passed
Checking for chroot directory /mnt... Passed
Checking for chroot directory content (bin
boot
Checking for binary /mnt/bin/ls... Passed
Trying to chroot... Failed

This is worth reporting a bug at url.

View 9 Replies View Related

Debian Installation :: USB Installation Fails To Find An Installation Iso Image

Aug 15, 2010

I have installed Debian maybe 30 times over the years since about 2003, stable, testing and Sid on two different desktops and two different laptops. The only problem I have ever had is sometimes with a flaky daily build. It is one of my favorite distros.

BUT, I am totally frustrated is trying to install to a USB. I have followed the manual step by step about 6 times in the past two weeks. The result is always the same. The installation fails to find an installation iso image. Yes, I know the iso image and the hd-media vmlinuz and initrd.gz files are supposed to be the same version.

File: debian-testing-i386-netinst.iso from: [url]

Files: vmlinuz and initrd.gz from: [url]

The USB boots to a Language selection screen and proceeds through the Keyboard selection screen with no problems.

The next step which searches for an installation iso image fails.

Skipping that step and trying to load installer components from iso image also fails.

Searching the entire PC for an installation iso image also fails. (I even copied the netinst iso image to the HD root directory.)

View 6 Replies View Related

Ubuntu Installation :: Installation Finished - Click OK To Reboot It Never Does - Forcing A Shutdown

Sep 20, 2010

I'm having is trying to install ubuntu 10.04, when i get to the end and it asks you to click OK to reboot it never does, it sits there and never reboots (left for an hour!), forcing a shutdown and starting up then results in no GRUB coming up to dual boot (windows 7, installed on a seperate HDD)

This previously worked fine but I got rid of ubuntu to try a different flavour (which didn't install successfully, couldn't find the disk drive I wanted to install it on but I had already wiped ubuntu off for a fresh install)

I have formatted the partition i made (30gb partition) and manually created space for root and a partition from that for a swap file but this made no difference. I have used a partition manager and completely got rid of the partition (resizing the drive back up to full amount) and let the ubuntu installer do the partition itself but again the same problem.

I'm not sure what it is doing at this stage when going to reboot, i'm guessing installing GRUB and terminating the processes for the reboot, which never completes. I have also tried installing GRUB on the partition which said "Windows 7 loader" but that made no difference. I will try fixboot and fixmbr commands in windows recovery console in case it can't overwrite the boot sector for any particular reason tonight.

View 9 Replies View Related

Ubuntu Installation :: Possible To Use Windows Bootloader?

Feb 11, 2010

I was wondering if it's possible to use the windows bootlaoder instead of GRUB to choose between Windows and Linux? If so how?

View 5 Replies View Related

Ubuntu Installation :: How To Access The Bootloader

Feb 15, 2010

I am just starting to learn how to work with a Linux OS and was planning on using a bootloader to start my PC so that I could choose which OS I wanted to start, enabling me to mess around with them without needing to worry about hosing my system.Also, my studies are taking me deep inside how the Linux OS system works in general and was hoping that I could also get some advice on where to start separating GNOME from the OS to find out exactly how they work together, how the OS works with services, etc. because I am trying to learn everything that this entails.

View 2 Replies View Related

Ubuntu Installation :: How To Use Win7 Bootloader

Mar 3, 2010

I installed Windows 7 First then give partition space of 25 GB for my Ubuntu. However, I prefer using Windows 7 BootLoader instead of using Ubuntu BootLoader.

View 4 Replies View Related

Ubuntu Installation :: Getting The Lubuntu USB Without Bootloader?

Jun 24, 2010

I recently installed Lubuntu to a USB. It was up and running and worked fine, however, upon exiting and going to boot into windows, I noticed it had installed a GRUB bootloader. I use whole disk encryption on windows, which has its own bootloader, so I can't be having some other bootloader on the PC interfering with this. I used my rescue disk to restore my WDE bootloader, but the USB stick will not boot now.

I also tried using pendrivelinux but this copies the live cd version onto the USB stick and nothing saves when you log off.installing Lubuntu to USB without a boot loader?

View 4 Replies View Related

Ubuntu Installation :: Best Bootloader With 10.04 And Win7?

Oct 3, 2010

What is the preferred bootloader with Ubuntu 10.04 and windows 7, when multiple booting also with Vista and XP all on one hard drive and each on separate partitions? All are installed except Ubuntu and now boot with the windows boot manager. I have heard that if you install grub 2 on the MBR, then boot windows 7, that it will replace the grub boot code with windows boot code automatically. So is it best to use that NeoSmart EasyBCD tool to add Ubuntu in to the windows boot manager, and can I install grub on the boot sector of Ubuntu's root partition ?

View 9 Replies View Related

Ubuntu Installation :: How To Change Bootloader

Oct 16, 2010

I have two installs on the same drive but different partitions. First I installed XBMC live which is based on Ubuntu (I don't know the exact verion but I think it's in the 9.x).Then I installed full Ubuntu 10.04 on another partition. Now it uses grub2 off the second partition. I configured it to boot XBMC as default and I've had no issues with it. However in the end I rarely use Ubuntu since this is really HTPC. I thought maybe it would be cool to check emails and do some web browsing on my TV, but it turns out I prefer just using a regular computer for that. So I want to delete the partition, but I'm worried doing so will make the system not boot anymore unless if I reinstall XBMC live, I don't want to do that either since I've got it configured all properly and I don't want to mess that up. So I believe I have to change the MBR to point to the XBMC partition although I haven't quite figured out how to do that.

View 2 Replies View Related

Ubuntu Installation :: 10.10 - Where To Install Bootloader

Mar 26, 2011

I am installing version 10.10. Does it matter where I install the bootloader? There are selections for the entire device and each partition. I have Windows 7 on /dev/sda1 and Ubuntu on /dev/sda3. The last time I tried this I couldn't go back to Windows 7 even after using the grub-update commands.

View 9 Replies View Related

Ubuntu Installation :: 11.04 No Bootloader Installed

Jun 4, 2011

I tried to install Ubuntu 11.04 via .iso + USB key to my Asus EeePC 1000HE. This computer comes with two partitions already on the hard drive so I installed to the empty one, to dual-boot with Windows XP on the other. Installation seemed to work, but after resetting, the computer always boots straight to Windows, not Ubuntu or an OS list.From my Ubuntu boot USB, sudo fdisk -l shows that the installation wrote to the partition successfully.From Windows, the partition appears to have disappeared.So it seems that the installation worked except that I have no way to boot to Ubuntu.

View 3 Replies View Related

Ubuntu Installation :: No Bootloader After 15 Install?

Sep 1, 2011

I have seen multiple others with this problem, I now have it too. I had Ubuntu 10.10 installed on my entire disk, then I installed Fedora 15 with it. The resizing-the-disk went smoothly, everything is great, but now when I turn on my machine, I get no grub, no boot loader, nothing. I just get thrown right into Fedora. I saw on a few other posts that if you manage to get into Ubuntu, you can open a terminal and type something along the lines of sudo grub update, and that would do the trick. The only issue is that I can't even get into ubuntu. I also was told that if you boot from a livecd you can edit the boot config, or view it, or something. I'm pretty new to all this "bootloader grub" jazz, and am hopelessly confused. How do I make it so that upon startup, I am able to choose between Ubuntu and Fedora?

View 9 Replies View Related

Fedora Installation :: Add Ubuntu's Grub To The Bootloader?

Aug 9, 2009

I recently installed Fedora on a triple boot system with Winows XP and Ubuntu JJ. how to add Ubuntu's grub to the bootloader. Here is the output of Fdisk -l.

[root@localhost rabbit]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[Code]....

View 8 Replies View Related

Ubuntu :: Grub2 In 10.4 Installation Stopped Now No Bootloader

Apr 30, 2010

I tried to install 10.4 but it comes to the stage which installing grub2 and stop now I don't have a boot loader?

View 2 Replies View Related

Ubuntu Installation :: Cannot Multiboot .04 From Windows XP Bootloader

Jun 1, 2010

I am trying to install Ubuntu10.04 on my machine which already has on it, Win XP. Lemme lay down the setup of my machine first of all.

I got a new 320GB HDD of which I have taken 20GB as the primary partition and installed Win XP on it. Took another 220GB as an extended partition for my data storage. Around 63GB was remaining which I left it as unallocated. Decided to try Ubuntu, but preferred to boot it from the windows bootloader. Downloaded and burned the Ubuntu-10.04-desktop-amd64.iso(have a AMD x3 425 machine) and tried an install on 30GB of the 63 left.

I did not try any partition scheme. I chose the manual partition option, made a 28GB ext4 partition, made it primary, mounted the /, took another 2GB for the swap and proceeded. Chose advanced option and installed grub on the 28GB(/dev/sda6) and completed the installation.

Since no grub was installed, Ubuntu was not available. So then, used the bootpart utility to point grub to the windows bootloader, but it did not work, was giving me error when I chose Ubuntu from the bootmenu modified by the bootpart.

So tried booting with the same install cd, chose Live Ubuntu this time and mounted the 28GB, copied the first 512bytes using dd if=/dev/sda6 of=ubuntu bs=512 count=1 to a usb drive. Rebooted into windows and copied the file to C: and added it to the boot.ini. Rebooted and tried choosing Ubuntu from the boot menu but it does not work. I get a blank screen with the cursor blinking.

The machine is new and BIOS is LBA enabled by auto.

View 9 Replies View Related

Ubuntu Installation :: Windows XP Took Over The Grub Bootloader?

Sep 4, 2010

i had a dual boot xp/ubuntu first. later i had to format and reinstall xp. this deleted the grub bootloaderplease let me know, how to fix this! please make it simple . i have the live cd, but i don't have internet connectivity in ubuntu.

View 1 Replies View Related

Ubuntu Installation :: Without Touching Windows Bootloader?

Sep 23, 2010

So here's the skinny, I have Windows 7 home Premium installed on my Touchsmart PC. I have a 60 GB partition I want to use for Ubuntu. Can I install Ubuntu to that partition so that it doesn't change how my computer boots up already?

Example:

I press the power button. The POST test processes and then boots into windows no questions asked, as if it's the only OS on the system.

I want to keep it that way even after Ubuntu is installed.

I want Ubuntu ONLY accessible by using the BIOS boot menu as soon as the PC starts up.

View 5 Replies View Related

Ubuntu Installation :: Bootloader On External Drive?

Oct 1, 2010

I recently installed Maverick RC to a partition on my external drive.Following the GUI, I used the advanced option and installed the bootloader to "sdb" and had Maverick install to a partition on the external drive (I want the GRUB to be on the external drive so I can boot directly into Win7 when I don't have the external connected). And, to note, I did set my BIOS to boot from the external drive first, I have that option in my BIOS. So, when I finished installing, I rebooted and all I got was a "-". Not even a "disk not bootable message". It just hung at "-" .

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved