I'm trying to install openSuSE 11.4 onto my brand-new Lenovo W520 laptop, using the Intel Rapid Storage Technology (FakeRAID?) controller, ROM version 10.1.0.1008. I have 2 physical 500GB disks configured in a mirror (RAID-1). Everything looks fine, the installation program comes up and asks if I want to use mdadm to manage the RAID, to which I answer yes. I go through the normal setup screens, and select the partition layout that I want (for sake of this post, I'll limit myself to the layout that the system itself recommends).
The problem comes when it becomes time to format the partitions. Somehow the partitioning program gets it into it's head that the root partition is 10TB, not 20GB, and the ext4 partitioning fails in various ways (short reads to sector zero, unable to map using 4096 byte sectors, etc, etc) depending on exactly which partitioning scheme I'm attempting. I pretty much get the same result no matter how I play the partitions, which file systems I use (XFS, ext4, etc [of course, I can't use XFS for /boot...]).
For now I've gone ahead and set myself up using software RAID, since this system is unlikely to become dual-boot with Windows for a few years at least. (As an aside, but as a hint to others, when the installation fails, I end up having to go back into the Intel RAID controller BIOS boot to clear out the entire RAID setup each time it fails - the disks are left in a completely useless state).
Having an issue with a fresh install which gets stuck at partitions formatting 33%. Tried different HDD's, 2 optical drives, 4 sticks of RAM, different SATA cable, disconnect floppy. Have tried both normal and alt cd images using different burn speeds.
I've just acquired an Lenovo ThinkPad W520, installed openSuSE 11.4 - and tried to install the Nvidia driver... but the X won't start at next reboot due to the following error: "GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors." Revision: 0x09I've tried to install drivers as described at: SDB:NVIDIA drivers - openSUSE - both with click install, and the repositorie way, I blacklisted the "nouveau" driver and "NO_KMS_IN_INITRD" is set to yes!
I have a mounting rack in which I try to plug in various HDDs. Now, all of them have vfat. Blkid returns something like:
/dev/sda7: UUID="4B16-F1E8" TYPE="vfat" The UUID looks abnormally short to me. I found no way to obtain a longer, typical UUID, and when I set Yast2 partitioner to mount by UUID, it sees and it successfully uses the short UUID. Yast2 even adds it to /etc/fstab like this: UUID=4B16-F1E8 /windows/C vfat users,gid=users,umask=0002,utf8=true 0 0 However, this short UUID is useless in /etc/fstab. It doesn't work at boot time and it doesn't work when I try to mount manually. xxxxx:~ # mount /windows/C mount: special device UUID=4B16-F1E8 does not exist. Also, one cannot find these short UUIDs in /dev/disk/by-id/.
For a billion reasons, I really want to mount these FAT32 partitions by UUID. Do I have any way to do it?
This laptop has been in the mainstream news as the cheapest Windows laptop available. Unfortunately it has a 64-bit CPU with 32-bit UEFI that dumps to the grub shell before installation. In addition, the built-in keyboard does not work.
As far as the dump to shell problem, this seems like something is not setup correctly in the grub UEFI configuration. This "hybrid" notebook should be using the multi-arch as I understand the situation. I noticed there is no grub configuration file in the multi-arch netinst ISO when I mounted it and looked around. I also noticed the standard netinst ISO is not easily mountable: there are errors when I try to mount the individual partitions to inspect the grub configuration. Additionally, Kubuntu boots perfectly aside from the keyboard issue. Devuan also boots when I modify the netinst to bypass gummiboot and use grub directly. Finally, the multi-arch grub shell freezes up when autocompleting and searching through the drives for the grub config, leading to a forced reboot. As an extra note, I tried 2 different flash drives and CD install media with the same results.
I tried many, many grub kernel combinations to fix the keyboard issue. It works in grub, but not in Linux. I was ultimately going to try a newer kernel to fix it.I was in a hurry to get something set up so back to the store it goes.
I'm trying to create some Linux partitions to install Slackware on my Lenovo W510 notebook and I'm getting some partition "errors" when using fdisk or cfdisk during the Slackware install. I have a feeling this is due to the hidden system restore partition and was wondering how others have dealt with this.
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
I have a 16GB memorystick which used to have a Linux partition. It therefore has two partitions; 2GB FAT32 and 14GB linux boot drive. The linux part stopped working, so I decided to reinstall it. But windows can't see that partition. I tried formatting the whole disk, but I can only format one partition (the FAT32). There seems to be no way to combine the two partitions into one big one, and there seems to be no way for windows to partition the large part of the memorystick to but Linux on it. In the windows partition manager, windows sees the large unused partition, and it let me delete it. But once I have deleted it, I'm not allowed to format it. Also I cannot delete or resize the small partition. I have a memorystick with two partitons. Windows only sees one of them, and won't let me use the other one. I would like to combine the two partitions so I can install Linux on the memory stick again.
While installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
Installation fails with PartitionException: Can't have overlapping partitions I am trying to install Fedora in my Laptop as a dual boot. I tried to create partitions like root ext4 then /home & /var lvm and swap but after applying write changes to disk I am getting PartitionException: Can't have overlapping partitions. So I tried several times just normal partitions etc. but didnt work. I found this on net
I wanted to update my 11.3 installation to 11.4. Everything went fine, but at the point the installation switched to the installed new system, it went completely wrong. This is the first time after more than 15 years of using (open)SUSE I have got trouble to install a new version.
What went wrong: the display shows some hundred miniature thumbnails of the screen to continue the installation. Only possibility was to switch to a console session. I did change the settings in initrd to NO_KMS_IN_INITRD to 'yes', then rebooted the PC. But the display is still unusuable. Then I tried the failsafe option, without any success. So I had to re-install the previous version, where I don't have this troubles. Fortunately, I made a backup of most of my settings, but it takes me still a lot of time to re-install everything, as I have to re-install a lot of libraries and recompile some programs.
I did a try with a live-DVD of Knoppix, the display is also scrambled but not so bad as with 11.4. Then I tried a live-CD of Kubuntu, and there anything worked PERFECT!
If openSUSE cann't give me a valuable explanation and solution, I have to consider to switch to Kubuntu after more than 15 years of openSUSE.
Some details of my hardware: - graphics card: nVidia GeForce 6150SE - driver: nouveau - display: Acer HD 24inch screen with a resolution of 1900x1080
Remark: with the installation of 11.4 on other PC's of friends and family, I didn't have troubles, but they don't have such a high-resolution display.
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
I am trying to install openSuSE 11.4 on my IBM xSeries 440 Server and I am not having much success. I am getting to the welcome screen and installation menu screen fine, but when I select the 'install' option it loads the Linux kernel up to %100 and then just goes to a black screen from which the only escape is a reboot, the same thing happens when I select 'check installation media' and 'Firmware test'. I have tried the 'no ACPI' and 'safe settings' setting and still no luck.
I have successfully installed Windows server 2003 Enterprise edition on this machine so I know the hardware is ok.I suspect it could be a driver issue, but as I am very new to Linux and server installations I am grasping at straws.
I bought it blank and installed Opensuse 11.2 Gnome 64bit as the main OS (using it right now). Using the "long method" instructions found on this website, I installed the Nvidia 190.42 graphics driver from the Nvidia website. It is working perfectly. My OS worked great for a while (love it), but now I am unable to boot up completely into Gnome. The bootscreen goes fine until I get past the automatic login screen for gnome, then the display stays on the default green background. My lights indicate that my computer is working, but no panels or icons load onto the desktop. After about two minutes, a notification pops up saying that I am connected to the wireless network, but there are still no panels or icons on the desktop. My mouse pointer works fine, so I know that the display is not frozen. I end up having to shut off my computer and restart it. Usually this takes two tries before the Gnome desktop completely loads and I am able to use my computer. I'm relatively new to Linux, so if I need to do anything "fancy", you'll probably have to be patient with me and walk me through it
I have tried installing 11.2 64 bit with Gnome. Every time if finishes the install and reboots it will start HAL daemon and just black screen. I have tried loading with using the number 3 with no video. Same thing black screen after loading HAL daemon. I did a install with selecting VESA same thing.
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
Tired of fat32 fragility, I reformatted a 4GB pen-drive as ext4 using Yast's partitioner. I chose format as ext4 and checked fstab options "can be mounted by user", "no access time" and "ordered journaling". I thought that these fstab options would be ineffective since a removable device won't be added to fstab. when I insert the pen-drive it auto-mounts and the folder /media/EMTEC is created (EMTEC is the volume name). The relevant mount entries are:
There's no fstab entry, as it should be, and there is a mtab entry corresponding to the pen-drive, /sde1. However the /media/EMTEC as created (by udev, I suppose) is owned by root, I can't write to it. But if I change (as root) the /etc/EMTEC folder permissions so it belongs to the regular user, i can (obviously) write to it *and* it stays so *between* remounts. Haven't tried a reboot yet. What I'm not sure is if ordered journaling is OK for a pen-drive - or any kind of journaling, for that matter. Or will this significantly decrease flash memory life? Also, the fstab options set in Yast appear to be remembered by whatever creates mtab, as well as /media/EMTEC permissions. Is that so? Where are these settings kept? How does this work?
I am attempting to install Ubuntu Netbook 10.10 within Windows 7. The installation process using WUBI worked as expected. However, after rebooting to finish the installation process, I am stuck at:
Completing the Ubuntu installation. For more installation boot options, press 'ESC' now... 0_
I'm definitely puzzled on why I'm stuck on this screen. Also attempting to boot from USB will be stuck without an additional command line being inserted. I have come across threads relating to boot issues, but I have found no solutions to this. I'm rather annoyed that this sort of bug has not yet been fixed. Earlier this year I installed an earlier version of Ubuntu Netbook, which was most likely version 9. So I have no idea why 10.10 suddenly will not install on my machine.
Suspend works about 50% of the time on my T400. The other 50% of the time, the screen goes blank (light stays on), there is a blinking cursor in the top left, and the "moon" light blinks forever.
I've got the latest ATI (3470?) video driver installed. I've seen a few posts about this but no clear solution. Anyone here have this problem and (more importantly) been able to fix it?
After trying to install and partition with a live CD I restarted the PC and What do you know it reads Starting Windows 7 , Opensuse installation Completely Gone Wasted like it never even took place , and it left a gift a 100 GB less of Space on the HD . at least thats what it reads out ... how to get my full HDD back ?
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2. Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options: * no apic * no acpi * "noapic acpi=off" entered manually * Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
So I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
I have problems installing Fedora 14 on my netbook, is a Lenovo S10-3, model 0647FDS (Atom N550, 2gb DDR3, etc). When the installation program starts, hangs at "Initalizing network drop monitor service"
I'm trying to install Fedora 15 on my Lenovo S10-2 netbook, using a USB drive I created with LiveUSB-creator, as suggested. The creation of the USB drive works fine, but when I try to boot from it on the Lenovo, I get cryptic error messages :ERROR : idle with IF=0 -- and then some misc. error codes.I have no idea what this means or how to progress from here
