OpenSUSE Install :: HP Tx2525nr Install Fails On 1st Reboot After Installation?
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
ADVERTISEMENT
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
View Related
Apr 26, 2009
I've got a RAID5 array that doesn't want to automount after rebooting. I'm pretty familiar with linux, RAID, and mdadm, and up until now, I've had the RAID5 array working just fine. However, whenever I reboot, the array drops off and won't remount until I manually assemble and then mount the thing. I find this odd because I had everything automounting just fine back in 10.3, and even in 11.0 (I think - not sure on that). Currently, things are working, but I'd really like to not not have to type
Code:
mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1
followed by
Code:
mount /dev/md0 /mnt/data every time I reboot. Even including this in some sort of start-up script seems kludgey... Surely there must be a more elegant way of automatically bringing up a RAID5 array after booting? I'm not sure what information you'll need, so I'm going to go ahead and include as much as I can anticipate...
So having already used the commands:
[Code]....
View 9 Replies
View Related
May 18, 2010
I'm installing 10.4 x64 on a Dell PowerEdge R610 in a RAID 1 configuration and the install goes fine until I have to reboot the server to finish the install. On reboot after about a minute it gives the error.We've tried letting GRUB manually configure itself at the end of the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.In the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same.I've got 3 of these server to get setup and running as part of our back end and network restructuring and have been stuck at this point on the first one since Friday.
View 9 Replies
View Related
May 17, 2010
I'm installing 10.4 x64 on a Dell PowerEdge R610 RAID 1 and the install goes fine until I have to reboot the finish it. On reboot after about a minute it gives the error
Code:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline/
-check rootdelay= (did the system wait long enough?)
-check root= (did the system wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/mysql1-root does not exist. Dropping to shell!
what to do and my co-worker who knows a little more about Linux can't get it to let him check any of the above common problems.
We're tried letting GRUB manually configure itself at the end og the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.
EDIT: in the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same
View 9 Replies
View Related
Nov 18, 2009
After successfull installation of Suse 11.2 and reboot i get a Blackscreen. When i try to start with "init 3" its still the same problem, Error Message in Bootlist
"Failed to get NUMA Memory Information from." Suse stops loading after "HAL DAEMON - DONE" and gets a blackscreen. If got a Nvidia Gforce 9400GT Graphic Card, and a Athlon 2 x2 Processor. I loaded the DVD with Bittorrent and Checksume and Burning are o.k/successfull. I also tried to reinstall with ext3 but still the same problem. Are there any known issues/solutions for this Problem?
View 9 Replies
View Related
May 9, 2011
I wanted to update my 11.3 installation to 11.4. Everything went fine, but at the point the installation switched to the installed new system, it went completely wrong. This is the first time after more than 15 years of using (open)SUSE I have got trouble to install a new version.
What went wrong: the display shows some hundred miniature thumbnails of the screen to continue the installation. Only possibility was to switch to a console session. I did change the settings in initrd to NO_KMS_IN_INITRD to 'yes', then rebooted the PC. But the display is still unusuable. Then I tried the failsafe option, without any success. So I had to re-install the previous version, where I don't have this troubles. Fortunately, I made a backup of most of my settings, but it takes me still a lot of time to re-install everything, as I have to re-install a lot of libraries and recompile some programs.
I did a try with a live-DVD of Knoppix, the display is also scrambled but not so bad as with 11.4. Then I tried a live-CD of Kubuntu, and there anything worked PERFECT!
If openSUSE cann't give me a valuable explanation and solution, I have to consider to switch to Kubuntu after more than 15 years of openSUSE.
Some details of my hardware:
- graphics card: nVidia GeForce 6150SE
- driver: nouveau
- display: Acer HD 24inch screen with a resolution of 1900x1080
Remark: with the installation of 11.4 on other PC's of friends and family, I didn't have troubles, but they don't have such a high-resolution display.
View 4 Replies
View Related
Apr 14, 2011
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
View 9 Replies
View Related
Jul 1, 2010
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
View 3 Replies
View Related
Jul 7, 2011
I am trying to install openSuSE 11.4 on my IBM xSeries 440 Server and I am not having much success. I am getting to the welcome screen and installation menu screen fine, but when I select the 'install' option it loads the Linux kernel up to %100 and then just goes to a black screen from which the only escape is a reboot, the same thing happens when I select 'check installation media' and 'Firmware test'. I have tried the 'no ACPI' and 'safe settings' setting and still no luck.
I have successfully installed Windows server 2003 Enterprise edition on this machine so I know the hardware is ok.I suspect it could be a driver issue, but as I am very new to Linux and server installations I am grasping at straws.
View 5 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Jun 30, 2011
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
View 4 Replies
View Related
Sep 15, 2010
I just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.
I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!
This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason
View 9 Replies
View Related
Dec 10, 2009
After trying to install and partition with a live CD I restarted the PC and What do you know it reads Starting Windows 7 , Opensuse installation Completely Gone Wasted like it never even took place , and it left a gift a 100 GB less of Space on the HD . at least thats what it reads out ... how to get my full HDD back ?
View 4 Replies
View Related
Jan 27, 2010
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2.
Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options:
* no apic
* no acpi
* "noapic acpi=off" entered manually
* Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
View 4 Replies
View Related
Dec 21, 2010
I tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:
md0 /boot
md1 /
md2 swap
or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)
View 2 Replies
View Related
May 6, 2011
I'm trying to install openSuSE 11.4 onto my brand-new Lenovo W520 laptop, using the Intel Rapid Storage Technology (FakeRAID?) controller, ROM version 10.1.0.1008. I have 2 physical 500GB disks configured in a mirror (RAID-1). Everything looks fine, the installation program comes up and asks if I want to use mdadm to manage the RAID, to which I answer yes. I go through the normal setup screens, and select the partition layout that I want (for sake of this post, I'll limit myself to the layout that the system itself recommends).
The problem comes when it becomes time to format the partitions. Somehow the partitioning program gets it into it's head that the root partition is 10TB, not 20GB, and the ext4 partitioning fails in various ways (short reads to sector zero, unable to map using 4096 byte sectors, etc, etc) depending on exactly which partitioning scheme I'm attempting. I pretty much get the same result no matter how I play the partitions, which file systems I use (XFS, ext4, etc [of course, I can't use XFS for /boot...]).
For now I've gone ahead and set myself up using software RAID, since this system is unlikely to become dual-boot with Windows for a few years at least. (As an aside, but as a hint to others, when the installation fails, I end up having to go back into the Intel RAID controller BIOS boot to clear out the entire RAID setup each time it fails - the disks are left in a completely useless state).
View 5 Replies
View Related
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Jun 13, 2011
I just downloaded OpenSUSE 11.4. After burning the iso and trying to install I get a "cannot exec bcedit.exe" error and the install fails. Has anyone else had this happen and what do I do now?
View 3 Replies
View Related
Nov 18, 2009
On a fresh install (tried two new installs now) I'm getting an error when I try to go out to the update repositories after the install. I'm getting a "failed to download /suse/setup/descr/packages.DU.gz from [URL] It seems to get about 48% and just hangs there. This happens both if I try downloading updates during the install or if I try doing an on-line update after the system is up.
View 2 Replies
View Related
Mar 4, 2010
I just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
View 6 Replies
View Related
Mar 23, 2011
Have burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies
View Related
Jun 28, 2009
I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
View 1 Replies
View Related
Jan 7, 2011
I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies
View Related
May 21, 2010
Third attempt to install 11.2 live on my netbook with three different USB sticks.
Every time it fails message reads...
Error occured while installing grub.
The only exception to a normal install is that sda1 is formatted with ext2 (to avoid journaling). I have had 11.1 running on that drive for several months without problems so there is no reason to believe it's a hardware problem.
Can I abort at this point and perhaps fix it from a live boot?
View 1 Replies
View Related
Mar 18, 2011
My system configuration is: Intel Core 2 Duo @ 2Ghz, 2Gb of RAM, Nvidia Geforce 9400 GT, Tv tuner Winfast PVR2000 XP Expert (autodetected according to the installer)
I never had a problem while installing openSUSE untill openSUSE 11.4.
All goes well while installing and configuring the network card, sound and even display(under nouveau). The problem is at the tv tuner. After i adjust some settings to it and pres OK so that the installer can save the settings all goes wrong. The installer freezes and i have to reboot the pc.
After repeating the configuration procedure and skiping this step, configuring the tv tuner using Yast this time, leads to the same thing: desktop freezes and i had to reboot because nothing is reponding anymore.
View 3 Replies
View Related
Dec 23, 2009
After the install reboots the computer, all i get is a blank screen with the mouse cursor which can move around freely. And when i go into failsafe the same thing happens, a blank screen withe the cursor.
Ive tried reformatting the drive and reinstalling it (Suse 11.2) and I still get the same thing.
View 9 Replies
View Related
Nov 7, 2010
I have a major problem installing opensuse 11.3 on my computer( hp pavilion dv6).I downloaded openSUSE-11.3-GNOME-LiveCD-x86_64 from software.opensuse.org: Download openSUSE 11.3 and made a live usb.I'm a newbie at using linux infact i never used another operating system beside windows.Now i have installed windows 7 (on c disk 100gb).My first problem when i am trying to install opensuse is that he dosn't automatic choose to make my partitions so i have to do it manualy.I was searching how to make it the best way so i desited to make 4 partitons one for ' /boot' one for ' / 'one for '/home' and a swap partition/In windows7 i made 4 new partitons
3:10 gb for /boot
4:10 gb for/
5:70 gb for /user
6:10 gb for /swap
My first question is :Is this right to make 4 paritions in windows (opensuse can't format or resize my partitions it just can edit it ) so it's my only way to make partitions( If this is wrong how can i make partitions then)
My second question is how to change the bootloader configurtation because everytime when ii try to install opensuse it stops at about 96% and it says to reconfigure the bootloader options.
If i skip this i get the folowing message
=== System Checking ===
Checking for /usr/bin/chroot binary... Passed
Checking for chroot directory /mnt... Passed
Checking for chroot directory content (bin
boot
Checking for binary /mnt/bin/ls... Passed
Trying to chroot... Failed
This is worth reporting a bug at url.
View 9 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Mar 22, 2010
I use the Air openSUSE theme for my panel bar, etc., yet, after rebooting (or starting up the computer after it has been shut down), the panel bar comes up as if it were configured with some kind of black theme, which I do not like - you can still see things like icons for windows, launcher, etc. except for the clock, since its font color is black.
How do I put a stop to this? I have tried everything I can think of, customized settings, different themes, and so on, yet I get the same results after booting into openSUSE.I am using the openSUSE 11.2 KDE version.
View 9 Replies
View Related
