OpenSUSE Install :: OS 11.2 Installation Fails While Copying Root Filesystem
Jan 27, 2010
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2.
Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options:
* no apic
* no acpi
* "noapic acpi=off" entered manually
* Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
View 4 Replies
ADVERTISEMENT
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Mar 4, 2010
My root filesystems flooded so I'm trying to move it to another (bigger) partition but I'm not sure of the best method. I just tried to use "dd if=/dev/sda1 of=/dev/sda6" to copy it but all that did was give me a brand new partition with no freespace available presumably because the filesystem is smaller than the partition. Is it possible to make the filesystem bigger?
View 8 Replies
View Related
Mar 17, 2010
I was just copying a large (50GB) file from one mounted partition to another mounted partition (a USB drive), but before the operation completed, my root filesystem, on a separate partition, filled up.Because it filled up I also couldn't get past the login when I rebooted. I think this is because there is no room to load temporary files. I'm expanding the root partition to temporarily fix this. how can I avoid my root file system filling up when copying a massive file between mounted partitions? the file is being cached in root during the transfer.
View 3 Replies
View Related
Oct 26, 2010
I am running 11.2, kde4. The day before yesterday, the system updated and I think there was kernal update within that. I had no problems immediately afterward. Then I did a total shutdown for the night, and turned it back on yesterday only to find this:
Mount: wrong fs, bad option, bad superblock on /dev/sda2, missing codepage or helper program, or other error
In some cases useful info is found in syslog--try dmesg | tail or so
Could not mount root filesystem--exiting to /bin/sh
sh: cannot set terminal process group (-1): Inappropriate ioctl for device
sh: no job control in this shell
$
Besides the last updates from the other day, I did nothing out of the ordinary, no downloads or any system/configuration tweeks. Will I have to reinstall opensuse? or is there a way to reclaim my previous setup--or at least reclaim my files and documents? I'm running off of the 11.2 livecd.
View 9 Replies
View Related
May 20, 2011
I rsync-ed root fs as a whole to another hard drive. In grub.conf I changed kernel option
root=/dev/sda1 ---> root=/dev/sdb
After kernel mounted root filesystem on the new hdd and all services started I successfully got prompt to enter login and password. However after login I immediatelly logout automatically. Here is /var/log/secure output:
Quote:
May 20 23:53:18 localhost login: pam_unix(login:session): session opened for user alex by alex(uid=0)
May 20 23:53:18 localhost login: LOGIN ON tty2 BY alex
May 20 23:53:18 localhost login: pam_unix(login:session): session closed for user alex
What is printed before this:
Quote:
May 20 23:50:47 localhost pam: gdm-password[1469]: gkr-pam: couldn't run gnome-keyring-daemon: Access denied
May 20 23:50:47 localhost pam: gdm-password[1455]: gkr-pam: gnome-keyring-daemon didn't start properly properly
Neither of these quotes appears if the initial file system (not rsync-ed) is used as root fs. I guess that pam might use information of hard drive, for example, its serial number, and login is tied to a disk. Please, give me a suggestion how to get rid of automatic logout.
View 6 Replies
View Related
Jun 12, 2011
I have opensuse 11.3 installed, and my motherboard has the intel i845 chipset,
one day windows had enough of the intel graphics chip and would not let me have anything but 640x480 pixels, well you cant do much with that so I put an ati card in and disabled the intenal graphics. windows was happy enough but suse could not boot - more specifically could not mount the root filesystem, saying it had errors (did a very quick fsck), could not find the journal, and I had a bad superblock. the "failsafe kernel" was no better. If I take the ati card out suse boots fine. however I do swap frequently between windows and linux and changing graphics cards between boots is somewhat irritating.
View 3 Replies
View Related
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
View Related
May 9, 2011
I wanted to update my 11.3 installation to 11.4. Everything went fine, but at the point the installation switched to the installed new system, it went completely wrong. This is the first time after more than 15 years of using (open)SUSE I have got trouble to install a new version.
What went wrong: the display shows some hundred miniature thumbnails of the screen to continue the installation. Only possibility was to switch to a console session. I did change the settings in initrd to NO_KMS_IN_INITRD to 'yes', then rebooted the PC. But the display is still unusuable. Then I tried the failsafe option, without any success. So I had to re-install the previous version, where I don't have this troubles. Fortunately, I made a backup of most of my settings, but it takes me still a lot of time to re-install everything, as I have to re-install a lot of libraries and recompile some programs.
I did a try with a live-DVD of Knoppix, the display is also scrambled but not so bad as with 11.4. Then I tried a live-CD of Kubuntu, and there anything worked PERFECT!
If openSUSE cann't give me a valuable explanation and solution, I have to consider to switch to Kubuntu after more than 15 years of openSUSE.
Some details of my hardware:
- graphics card: nVidia GeForce 6150SE
- driver: nouveau
- display: Acer HD 24inch screen with a resolution of 1900x1080
Remark: with the installation of 11.4 on other PC's of friends and family, I didn't have troubles, but they don't have such a high-resolution display.
View 4 Replies
View Related
Aug 31, 2009
i made a live usb stick with a original live iso image of f10 following carefully instructions of fedora support comunity once i finished i had tested it and i had the same problem (warning can not find root filesystem create symlink /dev/root and then exit this shell to continue the boot sequence, bash: no job control in this shell) of the following person:
View 2 Replies
View Related
May 11, 2010
On Launchpad there is the following thread on ureadahead:
[URL]
Is it sensible to remove "ureadahead" until this is fixed or is there no harm done? As a normal user ... (yes still I have /var in a separate partition, because I want to be on the safe side with my databases located in /var when reinstalling or upgrading the system ... - by the way: does this make sense or is it better to just have /home separate and use a backup of /var folders?) ... as a normal user I feel a bit lost with bugs like this. It would be nice to get some information somewhere. Something like:
"Don't worry, just wait for an update with a bugfix!"
or
"To avoid further problems just remove 'ureadahead' until it's fixed!"
View 3 Replies
View Related
Jul 1, 2010
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
View 3 Replies
View Related
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
View Related
Jul 7, 2011
I am trying to install openSuSE 11.4 on my IBM xSeries 440 Server and I am not having much success. I am getting to the welcome screen and installation menu screen fine, but when I select the 'install' option it loads the Linux kernel up to %100 and then just goes to a black screen from which the only escape is a reboot, the same thing happens when I select 'check installation media' and 'Firmware test'. I have tried the 'no ACPI' and 'safe settings' setting and still no luck.
I have successfully installed Windows server 2003 Enterprise edition on this machine so I know the hardware is ok.I suspect it could be a driver issue, but as I am very new to Linux and server installations I am grasping at straws.
View 5 Replies
View Related
Dec 10, 2009
After trying to install and partition with a live CD I restarted the PC and What do you know it reads Starting Windows 7 , Opensuse installation Completely Gone Wasted like it never even took place , and it left a gift a 100 GB less of Space on the HD . at least thats what it reads out ... how to get my full HDD back ?
View 4 Replies
View Related
Mar 28, 2010
I'm having trouble installing it on a "new" computer that I found at Goodwill for $60 with no operating system on it. When I go to edit the partitions, it won't let me do anything due to an apparent lack of a root filesystem. (I know this issue has been brought up and resolved in the past, but the usual solution (going into the validation.py file) isn't working for me, as there is no line in this one that says "if not root".)
View 9 Replies
View Related
Nov 21, 2010
I decided to try to do the 3 distro upgrade stretch from 8.04 to 10.04 this weekend and now I am hung on 9.04 to 9.10.. The upgrade went swimmingly, but I hit a wall upon boot. When I try to load kernel 2.6.31-22 I am greeted with the following error:
Code:
[ 20.879845] ACPI: I/O resource vt596_smbus [0x400-0$407] conflicts with ACPI region SMOV [0x400-0x406]
Mount of root filesystem failed.
A maintenance shell will now be started ... After doing some digging I found this thread which appears to be similar in the inability to mount the filesystem. However, it does not mention the ACPI error. I tried everything in that thread; verifying device ID's, editing fstab options; running a filesystem check, and flipping the UTC option in the rcS file but nothing worked. The OP of that thread eventually did a fresh install of Karmic; but I would rather not have to go that far.
View 3 Replies
View Related
May 6, 2011
I'm trying to install openSuSE 11.4 onto my brand-new Lenovo W520 laptop, using the Intel Rapid Storage Technology (FakeRAID?) controller, ROM version 10.1.0.1008. I have 2 physical 500GB disks configured in a mirror (RAID-1). Everything looks fine, the installation program comes up and asks if I want to use mdadm to manage the RAID, to which I answer yes. I go through the normal setup screens, and select the partition layout that I want (for sake of this post, I'll limit myself to the layout that the system itself recommends).
The problem comes when it becomes time to format the partitions. Somehow the partitioning program gets it into it's head that the root partition is 10TB, not 20GB, and the ext4 partitioning fails in various ways (short reads to sector zero, unable to map using 4096 byte sectors, etc, etc) depending on exactly which partitioning scheme I'm attempting. I pretty much get the same result no matter how I play the partitions, which file systems I use (XFS, ext4, etc [of course, I can't use XFS for /boot...]).
For now I've gone ahead and set myself up using software RAID, since this system is unlikely to become dual-boot with Windows for a few years at least. (As an aside, but as a hint to others, when the installation fails, I end up having to go back into the Intel RAID controller BIOS boot to clear out the entire RAID setup each time it fails - the disks are left in a completely useless state).
View 5 Replies
View Related
Jun 16, 2010
I've upgraded my squeeze box to linux kernel 2.6.32-5. But it shows mounting "here is the uuid of / " on /root failed: Device or resource busy while booting.Here is the menuentry of linux kernel 2.6.32-5.
[code]....
View 9 Replies
View Related
Dec 21, 2010
My linux distro is CentOS 5.3. Today I edited /etc/sysconfig/readonly-root and set "READONLY" to yes, now my /etc/sysconfig/readonly-root file is like this:
# Set to 'yes' to mount the system filesystems read-only.
READONLY=yes
# Set to 'yes' to mount various temporary state as either tmpfs
[code]...
View 3 Replies
View Related
Apr 2, 2011
I just installed 11.4 and I get an error when I try to boot, "fsck failed for at least one filesystem". It's referring to sdc2, which is my /. This drive is a 1.5gb SATA drive, and it may be that this drive is very slow to initialize. I used to have a problem in Windows where this same drive wouldn't be detected after waking from sleep, so I had to apply a hotfix patch.
I tried manually fsck-ing, but the drive isn't detected at all. Maybe some way I can make it wait longer for the drive?
View 3 Replies
View Related
Mar 4, 2011
I am working with Rhel 5.5. I am creating rpms and I have an issue. I want to bzip up the file before I make the rpm. Then I want to unzip it at install time. I add the zip up work to the %prep tag and added the unzip to the %prerun tag of the SPEC file. Everything works fine.
Then I install the rpm to a different folder with rpm -i --root /tmp for example and the scripts fail to run because the script can't find /bin/sh.
It makes sense because rpms are dependent on the absolute paths to the file, but I want to know how to still have the scripts run. I tried to put the /bin/sh in the /tmp folder (in the example above) but it still can't find it. And yes i do have /bin/sh on the system.
View 4 Replies
View Related
May 26, 2015
Debian 8/Cinnamon fresh install. /home is being shared with two other OS's, Mint and openSUSE. At the login screen I enter my user name and password and the screen blacks for 1-2 seconds and comes back asking for user name and password. I can login as root. As root I can launch the Group & Users GUI and attempt to set the user's password, and pressing the 'change' button does nothing obvious.
I can set the user's password in a terminal, which reports success. I tried to switch users and login with the changed password and I get the same failure. If I try to login with the original password I get an incorrect password error, suggesting that the password is being processed properly and the problem is elsewhere.
On previous installs with Mate and the default desktop (Gnome) I didn't have this problem. So, the questions are: Is it Cinnamon? Is it an unlucky chance bad install? Config files are typically in /home, which is being shared with Mate and KDE, is this the problem?
View 3 Replies
View Related
Dec 22, 2010
I've some virtual desktop. Iǘe some folder views in one on the desktops wich i would like to appear on the others, is there a way to copy them
View 3 Replies
View Related
Nov 18, 2010
My friend is having trouble installing Ubuntu on his Asus laptop. He says that when he boots it takes him to a root menu then fails a battery check:
[Code]...
View 3 Replies
View Related
Mar 3, 2009
I've been having trouble copying files. When I try to copy something, it starts copying, and after a few GB, I suddenly get an error. It tells me its unable to write to the disk. After this, the only way to be able to write to the disk again, is to reboot the system. I then get to copy a few more files before the same error appears. The partition in question is formatted as ext3, using opensuse 11.0 with KDE.
View 3 Replies
View Related
Jun 20, 2011
I've installed squeeze and wheezy on an old Toshiba Satellite 210 CS laptop with 48MB RAM and a 20GB IDE harddrive.Grub2 won't boot at all and stops with a "error: cannot allocate real mode pages". The solution to that is to use the grub-legacy package.The boot then fails with "waiting for root device" and drops to an initramfs shell.
View 5 Replies
View Related
Dec 27, 2010
From one day to the other my system stopped booting properly. Since I (finally) fixed it, I wanted to share my solution. It runs on a fakeraid pair of SSD's of 60 GB each (actually a single Revodrive device, but it shows up as two devices). When Ubuntu 10.10 boots, I'm dropped to a shell.During boot, when I removed "silent splash" from the kernel's command line, I got these messages:
Code:
[ 4.960240] scsi 6:0:0:0: Direct-Access ATA OCZ-REVODRIVE 1.20 PQ: 0 ANSI: 5
[ 4.960425] sd 6:0:0:0: [sdg] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[cod]....
I doubt that this is what was needed (as I had that already when it didn't work, but I might be required in addition to installing dmraid)
# update-initramfs -a
After installing this, the problem was solved!! This is strange since I don't recall uninstalling this package or changing anything important, for that matter (perhaps did apt-get upgrade, but that's about it!). [URL]
View 2 Replies
View Related
Oct 12, 2010
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
View 5 Replies
View Related
Feb 5, 2011
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies
View Related
