OpenSUSE Install :: Boot Procedure Stops And Doesn't Continue By Itself?
Jul 18, 2010
I have an issue with normal boot (fail safe boot doesn't have this problem). The boot process just stops and nothing happens, I just see the green background, the white lizard and no moving progress bar. I've given it about 40min without touching it, but nothing happened. If I press escape, the last log print says its mounting/mounted the hard drive. Not until I touch the head pad or press a key, it wakes up and the boot procedure continues. I once had a similar problem on opensuse 11.1 which could require much tickling before booting up completely. This was never seen on 10.3, 11.0 and 11.2, but now its back in 11.3.
View 9 Replies
ADVERTISEMENT
Jul 13, 2009
I have already started a thred here about RAID failure: RAID5 failed, system drops into limited single mode - openSUSE Forums
I was not able to boot the system until I commented /dev/md0 in fstab
Why is it so?
This is just a files sharing partition, it is not a system partition.
Is there any option to always ignore any errors and continue boot?
View 5 Replies
View Related
Jun 24, 2010
I'm new to OpenSuse and also fairly new to Linux in general. I installed OpenSuse 11.2 on a secondary machine and I really like it. However, during booting it stops somewhere half way, giving me only a black page but with a functioning cursor arrow. I can't do anything with it though. I re-booted in recovery mood and managed to boot up as root using the command 'startx'. How can I get back to "my own" log-in from here, with my own settings etc? There's obviously something missing during boot-up but where do I look?
View 5 Replies
View Related
Jun 8, 2011
There was an xorg update that I did today (June 8) and when try to boot into runlevel 3, it stops when it gets to starting up sntp. I also saw that it said DHCP client not running. When I try again (push the power button) and allow it to do what it wants, everything seems to start up just fine. I'm asking about this because I need to re-install my NVIDIA graphics card driver. For the boot options, I've tried clearing the text (I don't remember what they are at the moment) and typing:
Code:
nomodeset 3
and when that failed, I've tried it as
Code:
nomodeset3
but still get stuck at the same spot. I've also tried it without clearing the text but still it gets stuck.
How can I get to runlevel 3 in order to re-install my graphics card driver? I cannot run my 3D software without it. Can I switch to runlevel 3 from the usual (normal GUI) screen? I can't remember the command. I'm running SuSE 11.4.
View 9 Replies
View Related
Jun 18, 2011
I'm new to here and to linux, having changed over about 2 weeks ago. I've had a lot of trouble installing a variety of software and am really starting to despair and regret changing over. Right way to go about things for the installation processes of any of the following software on opensuse11.4 64-bit (I have tried everything I can to no avail):
Canon ip2700 series drivers
Creative Sound Blaster X-fi drivers
Skype
iTunes
View 9 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
Oct 9, 2009
No matter if it is safe mode or regular the computer stops booting at Starting smartd I installed wine and samaba files (through Yast) before I restarted the computer and I was looking in FSTAB to get my HD's working. I didn't make any changes to FSTAB (I didn't even save the file).
View 1 Replies
View Related
Aug 31, 2011
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies
View Related
Oct 10, 2010
I had a working setup of opensuse 11.0, dual booting using grub installed on the home partition. I tried to install 11.3 from the coverdisc of linux format (LXFDVD136). It took 5 goes before the install succeeded. Mostly stopping at the "boot installed system" stage. I put 11.3 on a formatted partition in the same place as 11.0, and put grub there too.
The system will not boot without assistance. I have to use a supergrub disc and tell it which partition to boot. If I use boot linux from supergrub I get the Grub error message 15 file not found. Supergrub CAN find windows and it boots with the win command. Automatic and yast initiated attempts to check for software upgrades are blocked by the application with pid 4587.
View 4 Replies
View Related
Dec 19, 2009
Trying to booting an Acer TM 8371 Notebook using USB flash media and the openSUSE-11.2-KDE4-LiveCD-x86_64 image.
After the BIOS greeting messages nothing more happens. System seems to hang. When removing the USB memory stick the system continues on trying to boot from the hdd.
When using the openSUSE-11.2-NET-x86_64 image, system detects the USB stick properly and retrieves it's ip address. Since there is no PXE system set up, installation of course stops thereafter.
What's the difference between both images? I recognized that when using the openSUSE-11.2-KDE4-LiveCD-x86_64 image a partition with type linux is created on the USB stick. When using the openSUSE-11.2-NET-x86_64 image fdisk says:
"Disk /dev/sda doesn't contain a valid partition table".
View 2 Replies
View Related
May 5, 2010
I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."
How do I resolve this?
View 3 Replies
View Related
May 18, 2010
Yesterday I used gparted to shrink win xp partition and to expand opensuse. When I try to reboot my laptop it doesn't boot anything, and it doesn't dislay on the screen anything like missing grub, grub rescue. I have opensuse 11.1 gnome on acer 5920g
View 5 Replies
View Related
Nov 13, 2010
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 9 Replies
View Related
Mar 12, 2011
i just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 6 Replies
View Related
Jul 22, 2010
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :
ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 6 Replies
View Related
Apr 20, 2011
Over the past two weeks my laptop has started locking up at random. I thought maybe it was a thermal issue, because I have an upgraded hard drive (put in 2 years ago) and once a month or so I might get a heat related lockup. I keep my fans running at high speed and the laptop elevated now and don't typically have an issue.
The freezing has started to become a daily occurrence now, and yesterday it locked up three times. I am able to move my mouse (unlike thermal lockups where everything goes down) but unable to click anything. The entire display freezes, and my cpu monitor doesn't continue to update.
I finally ssh'd into my laptop and was surprised to see it responding just fine. htop showed that my X-server was at 100%. When I killed it, X restarted automatically and promped me to log in. Everything is fine after this until the next lockup.
When I don't have access to ssh I have to hard-shutoff the laptop. That can't be good on this 5 year old macbook. I have done my system updates in the past two weeks that may have triggered this, but I don't remember anything specifically. I've tried all versions of my kernel that are installed but nothing, I have the intel video and have not had problems with it up until now.
2$ uname -a
Linux macbook 2.6.32-30-generic #59-Ubuntu SMP Tue Mar 1 21:30:46 UTC 2011 x86_64 GNU/Linux
3$ lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
Can anyone suggest something to try? I'm not sure how to go back to older versions of the the video drivers, but I'm not even sure if that is the issue. I did add the following to /etc/apt/sources.lst after the lockups started occuring:
Code:
# X
deb http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu lucid main #X-Updates PPA
deb-src http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu lucid main #X-Updates PPA
and did a full update, but this hasn't helped.
I'm running Ubuntu 10.04 LTS
View 5 Replies
View Related
Jul 6, 2011
I'm just a newbie to this operating system. Even though I'm having some trouble, it still seems more sensible to me than Windows. I'd like to continue to use it, but I'd like to know why it doesn't work for me sometimes, and I'd like to see if I can't make it work better for me.
After I upgraded to 11.04 I've had a host of problems. My USB ports have intermittant trouble recognizing storage devices. My USB ports also have intermittant trouble recognizing my USB WiFi device. The VLC player will crash the Gnome Desktop whenever I use it. I still haven't figured it out.
I'm interested in the following question:
Why can't software and hardware that already works be insured to continue to work after an upgrade?
View 3 Replies
View Related
Jan 8, 2010
My computer have Windows XP installed and now I want to install suse 9.0. I insert the boot disk (disk 1) and reboot my machine.Then on the boot option window, I select 'installation'. Then comes the error: cannot find SUSE installation CD. Activating Manual.... Then 'English'-->'English(US)'-->'Installation'. Then comes another error: Cannot mount CD-ROM.
View 2 Replies
View Related
Aug 10, 2010
I have to switch from VMWare Server 2.0 to XEN due the compilation of the kernel module fails. But XEN doesn't work on my newly upgraded server (fromm 11.0 to 11.3). When I install XEN via yast and do a reboot, then the screen goes black and the LEDs of Num and Scroll Lock are blinking. The last message i can see before the screen goes black is something like that:
[Code]...
View 4 Replies
View Related
Jul 6, 2011
In summary, after updating from 11.2 through 11.3 to 11.4, normal boot works fine, failsafe mode hangs with two fatal errors - "Module atiixp not found" and "Module ide-pci-generic not found". i would like to fix this a) so I have a recovery position b) so I learn a little more. As 11.2 has gone out of support I decided to embark on the upgrades to 11.3 then 11.4 using the zypper method described on this site. I think failsafe boot worked ok with the original 11.2 install, but I never had to use it in anger, so I can't be 100% sure. I did not test failsafe in 11.3, just checked that the typical cd set of applications seemed ok before proceeding with the upgrade to 11.4.
I have an AMD processor, chip set and an ATI 3800 series graphics card, so I added the ATI repositories for 11.3 and 11.4 as i worked through the upgrades. At 11.4 there were some graphics glitches during normal and failsafe boot which were successfully fixed by adding "nomodeset" to both boot options. Normal boot works fine but failsafe boot hangs with the error messages above. Searching for failsafe boot errors is unhelpful since, in all cases I have checked, normal boot fails too. I did try removing "Xfailsafe" from the failsafe options which produced no change.
I am guessing that, in failsafe mode, the ATI drivers are not loaded into the kernel and the idea is to default to some safer drivers which, in my case, are not present for some reason. However, there seems to be little information on the origin or purposes of atiixp so I don't know how to go about fixing this. I have not really researched the generic pci driver issue, but I am guessing that this is a fall back when the expected atiixp is missing.
View 8 Replies
View Related
Jan 29, 2010
i have a problem when i use test drive, it doesn't boot into the operating system. it just look like in dos when i login. what is wrong? shouldn't test drive let me see how its look when i use the live CD?
View 9 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Mar 14, 2011
i'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
View 4 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
Feb 13, 2011
I use static IPs in my network and IFup(traditional) this one is dual boot..when the boot sequence is at the point of assigning the Ip it counts down and fails. But after startup I can do a network restart and it assigns the IP properly. I am running 11.1 and also had this problem with 10.1. I am using /dev/shm mounted as a tmpfs as
the system seems to move a little faster this way and I recall reading that fglrx (ati proprietary driver) needs it. So here is the weird part If I do not mount /dev/shm it assigns the IP properly on boot....if I mount /dev/shm it will not. I just recently discovered this as with 10.1 I just lived with the problem...but on a dual boot machine it is really a pain. Does anyone have any clue where to look for the issue?? I have tried emptying shm and it of course does not matter as it is a ram device.
View 2 Replies
View Related
Nov 16, 2010
i come from ubuntu installation and i have had opensuse before and i remember installing any of thede two without any problem on any of many harddisk arrangement. but thge ltest opensuse 11.3 doesnt pllay nice with my windows and ubuntu installation booting. i reember using boot loader in yast and it used to load the coorect setting from scratch. but now when i chose "propose new configuration" and it founds opensuse and three other windows!
[Code]...
View 9 Replies
View Related
Mar 12, 2011
Boot from DVD 11.4 586 32 bit is fine. Loads up and offers me install, boot from HD, check media, firmware etc. Select text output, no acpi, check media. Linux kernel loads, then black screen showing progress in white text.
At "Starting udev..." process hangs. Eventually (several minutes later) message is returned about "worker" not able to read from "sr0" which I believe is the DVD drive which it has been using to this point.
I'm running 11.3 normally, udev is not a problem on boot from HD. The DVD media works fine on a Windows laptop showing "Starting udev... ok" and continues. Media checks ok on this machine.
I'm thinking that no matter what medium I use to install from, HD, DVD, net etc this udev problem is going to hit me again unless there is a hint I can pass to the bootup process.
After reading about other experiences with this issue I removed all the non-standard hardware and no difference. The DVD drive seems to be the issue. Bootup is already using it, and yet udev cannot find it.
View 8 Replies
View Related
Feb 23, 2011
I am attempting to install Maverick on an older pc. It has (2) mirrored 153 GB SATA drives. I set aside 33GB for a linux partition, by shrinking the partition in Vista.
Choosing to "Install along side windows" is not an available option. I can only choose use who disk, or use empty area. I choose use the empty area, and the Ubiquity installer gets hung up when attempting to format the empty space as EXT4. When I scroll up on the output I notice some error messages referencing NTFS. When I use Gparted it shows a possible problem.
Quote:
Warning:
The device /dev/sda1 doesn't exist
ntfsresize v2.0.0 (libntfs 10:0:0
ERROR(2):Failed to check 'dev/sda1' mount state: No such
file or directory
Probably /etc/mtab is missing. It's too risky to continue. You
might try an another Linux ditro.
Unable to read the contents of this file system!Because of this some operations may be unavailable.
The following list of software packages is required for ntfs file system support: ntfsprogs.
I ran chkdsk /r on the Vista partiton, in case there was a problem there. The issue still persists.
View 2 Replies
View Related
Sep 10, 2010
Last night I upgraded the kernel to 2.6.34.4-0.1-desktop and now X has stopped working. I can go into run level 3 OK.
I have tried removing the xorg.conf file, using a copy of the install xorg.conf. I have also tried reinstalling the ati drivers
-rwxr-xr-x 1 readyp home 101178081 2010-08-07 23:45 ati-driver-installer-10-7-x86.x86_64.run
-rwxr-xr-x 1 readyp home 103164399 2010-08-29 21:25 ati-driver-installer-10-8-x86.x86_64.run
the ATI drivers stop at 75% and do not complete.
If I go into run level 3 and run startx the screen goes black and all the keys stop working (Ctrl-Alt-F1 etc..)
I can attach the Xorg.0.log if you like, but it does not look strange.
I am sure the hardware is OK as I have my system dual boot with 11.2 and 11.3.
View 1 Replies
View Related
