OpenSUSE Install :: Frozen Mouse Cursor Image After Screen Power Off?
Sep 15, 2010
I run a HTPC which I recently upgraded 11.2 -> 11.3.Most things work fine but I've got an oddity. After the TV is shut down and restored the mouse cursor is "frozen":The old mouse image stays where it isHowever, the mouse IS active, in that you can (blindly) move the mouse, see it mouse-over widgets, and activate them - there's just no visible cursor where the hotspot is.Hardware is ATI chipset (can't remember which, offhand, but it's only a year or two old), running AMD driver, with a HDMI link to the TV.
Just upgraded to 11.3 from the terminal. There were a few hiccups, but it said to run "zypper verify," and it downloaded a few files and finished. When I rebooted, the graphics were fine, but the arrow in the middle of the screen is frozen. I can move the mouse till I get carpal tunnel, but the arrow ain't gion' nowhere. So how do I "unfreeze" my mouse? (Besides knitting it a sweater!) I'm hoping for a "ctrl/f2", and that aterminal can be opened that way, with a command to wake up the mouse dameon.
In KDE I'm using KWin as windows manager and somewhere in the configuration I defined that KDE should rotate the desktop cube to the left or the right each time I move my mouse pointer to the far left or right of the screen.If I keep it there for about a second it rotates the desktop cube to the next desktop.I once activated this but find this very frustrating when I'm trying to reach buttons on the same side. So I want to disable this feature but I can't find it anywhere. I can't remember where that option was that activated this feature.
I am using a wireless Xbox 360 controller with openSUSE 11.1. I use it for some emulators and all buttons work fine. There is however an annoying problem, the Xbox controller left joystick controls the cursor and digital pad acts as mouse buttons. So while I play, the cursor moves all around the screen and bad things could happen. Why this behavior? In xorg.conf there seems to be only just 1 mouse. And if I go in Joystick via YaST, there is only a menu to select which joystick I have. But my wireless controller has been automatically detected, I didn't setup anything. Is there a config file that I can modify to stop controlling the mouse with my gamepad?
Sometimes my mouse image on the screen stops showing. The mouse itself does still work and I can highlight an icon and click it. Just the image is missing and it makes it difficult to know where you are.
My mouse cursor has acquired some strange background image showing what looks to be paragraphs of chinese glyphs (they are too small to make out clearly). This background image is contained in rougly a 1 inch square with the mouse cursor hot spot in the upper left-hand corner. The mouse cursor is visible, but whatever is under those glyphs is covered.
I've tried the mouse configuration gui -- but it says nothing of background images for the mouse. I've also deleted and recreated my xconfig.org file to see if that somehow got mangled. I've been searching the web for a couple of hours, but cant seem to find anything related to my problem.
I have a repeatable and annoying problem that seems to be connected with the graphics card driver of nvidea. I had another card before (7900 card) and I have after having had a malfunction now a nvidea 430. Mainboard Gygabyte with AMD 790 Chipset, GB Ram. The opensuse system is fully patched and updated, newest kernel but the same error occurred with another graphic card and with the precedent kernel and with the precedent nvidia video driver.
Now, the problem is as follows: System is dual boot with options: openSUSE 11.4 64 bit
I let the update manager run overnight on my netbook because it was taking a while. When I woke up, my netbook was off. It may have shut off during the updates. Now, when I turn it on, it gets to the login screen but the keyboard and mouse don't work. Is there anything I can do without a Live CD? Unfortunately I don't have a flash drive or anything with me.
I got a problem with my opensuse 11.3 machine. Sometimes it doesn't boot up correctly and ends with a frozen white screen. It's not just x that is broken the whole pc is frozen as I can not ping or ssh into my machine
I keep starting up Fedora and I'm not able to get far (although it's not always at the same time) before my screen will go black, except it shows the mouse/cursor - but it's frozen, and thhen the caps-lock light starts blinking and I can't do anything or get it to recover. Sometimes it happens after 30 seconds, sometimes 40+ seconds and sometimes within 15 or so seconds.
How do I stop this and diagnose this?
I've tried, in the boot-startup to choose an older kernel version, butt the same thing occurs!
I have: Fedora 11 Kernel: 2.6.29.6-217.2.16.fc11 i586 Asus EEE PC 1002HA
One other thing, it does always seem to happen after I've turned on wireless. And I've been using F11 for months now with no issue.
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit: I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
I've been trying out suspend occasionally on Debian Testing to see if it works. After the last time though Gnome won't come back up again, I just get a movable mouse cursor and no panels or right-click options even after rebooting. I can switch to text consoles and kill X but starting it again results in the same behaviour. I noticed there have been a few Gnome and Xorg updates lately.
When I close the lid on my laptop, it blanks the screen but does not sleep or hibernate. When I open the lid, the screen wakes and everything runs, but my mouse cursor has disappeared. I can restart the desktop ctrl-alt-backspace and get my mouse back.
My hardware: - Lenovo Thinkpad X61 Tablet - Intel GM965 video - Ubuntu Jaunty (v9.04)
I just installed 11.4 with KDE on a COMPAQ EVO D510 SFF. The install seemed to go smoothly but after the boot completes I have only a white cursor on a black screen. The cursor moves with the mouse.At the boot menu, I can select alternatively "failsafe" and that takes me (after login) to the Linux command line and I don't know how to work that very well
I currently have my computer connected to my main monitor, as well as my TV. I am using the Nvidia Driver and they are running as separate X screens. I have currently run into the problem that if my wife is watching videos on the TV while I am surfing the web or something on the other monitor, we really need 2 seperate cursors.Is there some way to have each X screen own a seperate cursor controlled exclusively by its own mouse? Or is there some other solution to this that anyone can think of?
I have a machine running XFCE in a "kiosk" environment. The machine normally runs without a keyboard or mouse, and I remote control it via VNC and SSH.
When the machine starts up, the mouse cursor sits in the center of the screen. I don't want to plug in a mouse or use VNC to move the mouse to the bottom-right corner so that it is not visible, so is there a way to hide the mouse cursor or tell it to move to the lower right when X starts? It would be even cooler if the mouse could be disabled or hidden when no mouse is connected, but re-enabled when someone plugs in a mouse, but that's probably asking too much.
I'm running Ubuntu 10.10 which I recently installed on this emachines w3107. For some reason, while doing whatever I may be doing, my screen will flash off and on for about a minute, then when it stops flashing; there is no mouse pointer visible. I can still use the mouse, but it's ghost-like.
Redhat Ent Linux ES Release 2 (Taroon 8) Kernel 2.4.21-4.ELsmp startx(1): initialize X session - Linux man page
I thought I'd look into methods of recovering from a lost password for future use, how to change the passwd and shadow should I need to. So I started an X session, vi'd my .swp files then logged off. Perhaps I changed one of these files accidentally, but my intent was just to view them which I did. After starting up my computer the next day and logging in I began an X session - "startx". The session appears to have started, but with a black screen and an active mouse cursor.
I have two monitors set up on my Asus N61J laptop, but have a weird problem:When I move the mouse to right-hand edge of the Left (Primary) screen, it disappears. To get it back, I have to either keep moving it to the next screen, or move it over something that will cause it to change shape.It also happens if I move it to the left-hand edge the Right (Secondary) screen. Anyone have any ideas as to how I can fix this? It's a little annoying, as it makes it hard to select the Logout/Shutdown/Status menu
Did a quick search for these symptoms and couldn't find anything related. After upgrading to 10.04 I found that the computer (HP NC8000) now crashes frequently and at random intervals. It occurs sometimes after only a few minutes, other times after an hour or two. It happens while its in use, or while its idle, wether the screensaver is on or not, even if its locked and the lid closed. When I walk away and come back I find the screen has gone blank (except for the Mouse Pointer and a cursor in the top left) and the Caps Lock Light and Num Lock Light are flashing (signifying a crash)
I caught it while I was using it and watched as the screen suddenly went blank as described above. No errors or explanations or warning. A reboot restores order, but not for long. Some assistance with diagnosing this would be helpful. I suspect it could be ATI radeon 9600 mobility related, as with each passing version of ubuntu it seems to be more unstable
- OpenSuSE 11.3, 64bit - AMD Phenomen II X4 - ASUS M4A88TD-V Evo/USB3 - 3 hard disks - etc.
After start-up with runlevel 3, no applications running, network is up, the overall power consumption of the PC (without monitor) is ca. 70 Watt. After some minutes the monitor goes to power saving (terminal mode, runlevel 3 !), but the power consumption rises to 120 Watt! After pressing a key on the keyboard (e.g. Num) the monitor leaves the power save mode, shows the login screen, and the power consumption falls to 70 Watt. In parallel I have investigated the system via ssh and running top, but I have not observed any abnormal operation. I looked into /proc/acpi/* but I did not find something unusual.
I've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.
I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.
I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.
So I upgraded from 10.10 to 11.04 beta 2 two days back. Upon trying to use the system, these were the problems I had:
1. Mouse is absolutely not responsive. Even the cursor is not showing.
2. When I login through keyboard options only once this message flashed "Unity not supported by your hardware switch to classic mode on your next login". It flashed once, took me to the desktop screen where the classic desktop was available and I could not access anything without keyboard shortcuts.
3. When I tried launching firefox, deluge or even tried using the terminal to connect to the net I am unable to connect.
4. My USB devices are not read.
5. I finally tried to do a clean install of 10.10 using the live cd I already have but the OS is not booting from the cd.
As a result I am stuck with a comp which has no mouse, no internet, no usb support, no cd support. Do you guys have any idea how I get it to work again?
Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
I have Open Suse 11.3. I normally use GNOME or KDE sessions. Yesterday I was just thought of trying other Desktop Environments. so I logged out to choose a different session. I tried LXDE and logged back out. After that I found "metacity" in the sessions list and tried it. But no desktop appeared. All I got is black screen a with the mouse pointer/cursor. I waited for quite some time but no desktop, panel, etc loaded or was visible.
I could not figure out how to log off so I hit the start button. After reboot the system automatically chose the same session (It always reuses the last used session) and I was in the same sticky situation. I tried starting in Safe mode as well but still I get the same black screen with just the mouse pointer.
I know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.
this is a continuation of my install from : my experiences installing suse ( graphics stuff was from page 3)i have two graphics cards:ATI X700 x16 pcie card in a x1 slot (one monitor, left)NVidia GTX 7800 card in a x16 slot (two monitors, centre,right)machine boots up on the ati card, and i had configured them properly in the last topic, so now the setup looks good except for when i move the mouse cursor from the Nvidia card, left, over to the Ati card. this causes the GUI to be not responsive andthe cursor is flashing, either on neither monitor or one of the two and moving the mouse decides which (so its not a complete crash, but nothing is moving in the GUI). pressing many ys on the keyboard at once seems to stop the X and goes back to the the commandline.
the last problem i had in the last topic was that the virtual screen was not defaulting at the screen resolution i set and instead defaulted at 3840x1920 and i saw the top corner of the wallpaper. moving the mouse over to the ati card would still produce a crash with the above description.occaisionally the computer would crash with the same problem accross the nvidia monitors, however it always happens between the centre and monitors.i have installed the Nvidia drivers using a install program from the SUSe and it put the relevent packages on. Ati drivers are whatever came with 11.3 (and theseected that the card has two outputs). if its the nvidia drivers i could go back... (how?) hopefully it can use the two monitors still else its better to remove the ati screen in xorg.conf
I have just exported 3 png files out of gimp for a html document I'm working on right now, and they are all almost the same, except I need each to load when the user does something. So the first image will display on the page, and when a user puts their cursor over it, then it will load image 2. When they press it, it loads image 3.
