OpenSUSE Install :: Get Black Screen With Just Mouse Pointer
Dec 9, 2009
I've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.
View 2 Replies
ADVERTISEMENT
May 7, 2011
I have Open Suse 11.3. I normally use GNOME or KDE sessions. Yesterday I was just thought of trying other Desktop Environments. so I logged out to choose a different session. I tried LXDE and logged back out. After that I found "metacity" in the sessions list and tried it. But no desktop appeared. All I got is black screen a with the mouse pointer/cursor. I waited for quite some time but no desktop, panel, etc loaded or was visible.
I could not figure out how to log off so I hit the start button. After reboot the system automatically chose the same session (It always reuses the last used session) and I was in the same sticky situation. I tried starting in Safe mode as well but still I get the same black screen with just the mouse pointer.
View 6 Replies
View Related
May 29, 2011
I am using Ubuntu 10.10 on my Dell Inspiron 1525. I haven't have been having consistent internet connection, hence haven't updated for much of the time. Yesterday I tried to update the Firefox browser from 3.6 to 4 and ran
Code:
sudo apt-get install firefox
It told a amount of around 57 packages would be updated in the process. After the installation I shutdown and went to sleep.The system now boots to purple screen ubuntu dot loading and then to black screen with the mouse pointer in the centre. Then nothing happens. I searched in the forums and tried to go to recovery mode and ran dkpg, then failsafeX, but failsafeX cannot detect my input devices, Hence I can't do anything.
View 1 Replies
View Related
Jan 5, 2010
have a problem with an Acer Aspire one running linpus linux. I get a black screen with a white mouse pointer at startup. I don't know how this happened. I can interrupt the startup process with ^c and then see the following amongst other text :Loading x11 FronEnd module...Failed to laod x11 FrontEnd moduleFailed to launch SCIM
View 9 Replies
View Related
Aug 16, 2010
I had a perfectly well running CentOS 5 system but with an old crappy monitor. I replaced the monitor by a bigger one, i did a monitor detect to make sure that CentOS would recognize the highest possible resolution. Then changed the display rsolution for the current user.
Now when i login as root just a black screen appears with a white mouse pointer and then nothing. I already deleted all the contents in the home directory /root but no improvement.
When i login as a new user X is starting perfectly.
Anyone have a clue what i need to do or delete to get X working again? I can nuke the whole box and do a reinstall but i'd rather not.
View 3 Replies
View Related
Jun 15, 2010
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies
View Related
Nov 28, 2009
I am creating an openSUSE 11.2 Kiosk image. I have everything pretty much locked down but when I go into the gconf-editor under /apps/nautilius/preferences/show_desktop and uncheck the check box my mouse pointer changes to the circle icon that looks like it moves in a circle. Sortta like the busy or what it does during boot. Hard to describe by typing it out but if you make that change you'll see what I am talking about. I had this setup like this in previous versions of openSUSE so I am not sure what it is doing or what else I need to do to make the mouse pointer just the arrow like normally. I don't want the users to be able to right-click on the desktops to get a menu nor add icons so unchecking the show_desktop has served my needs.
View 3 Replies
View Related
Mar 5, 2011
Running Fedora 14, and when I wake the computer after not using it for a few hours I get a black screen with only the mouse pointer visible. This can sometimes be for a minute or up to 5 or 10 minutes, I'm not quite sure what the issue is. I have the screen saver set to blank screen, and I have the computer set to never go into sleep mode, however the display turns off. I just tested it out with the screen saver only activated and it wakes fine, and then set it to turn the display off after 5 minutes, and it wakes up fine if I try then. The issue is when it has been idle for the night or longer. I am running this machine through a KVM, so I'm not sure if that may have something to do with it. You can see from the output here that the mouse seems to be getting discovered all over every time I switch back to this machine.
[Code].....
This isn't a major issue, but it is very annoying if I want to switch over to this machine to get a few things done and switch back. Also, if I am waiting at the blank screen with the mouse, I can still press ctrl + F2 to access the terminal immediately, so the computer is functional but the GUI seems to be delayed in coming back.
View 4 Replies
View Related
Jul 15, 2010
I'm running 12, not 11. I don't know why I had 11 in my head. Can this be moved BACK from EOL? If not, I'll start a new thread. Sorry. My wife and I have matching HP EliteBook 8730w "mobile workstations" (laptops that need a donkey to move them). We also have matching LG second screens. Unfortunately, we have matching mouse pointer issues too, as you might expect.
99% of the time we work away without issue. 1% of the time, Fedora suddenly stops showing the mouse pointer in the separate LG screen. The pointer is there, you can use it (if you can guess where the hell it is!) but you can't see it. Only a reboot seems to solve the problem.
It's worth noting xorg.conf is not being used. It's an nVidia card in these laptops and I tried the latest drivers from them - they totally wiped out the display, I mean total FAIL, unusable. Had to boot up in without GNOME, run level 3, to fix it. After much messing around, I think I used the FirstAidKit plugin for xserver to repair things. Since then there is no xorg.conf:
[Code]....
If I restore *any* xorg.conf file it all goes wrong again, so I'm guessing there are either some defaults at play or there's another system currently managing my display. Either way, restoring/editing xorg.conf won't help me with the current set-up.
View 8 Replies
View Related
Sep 19, 2015
Yesterday I installed Debian Jessie, I ran into a few problems at first, but in the end everything worked fine. It started the desktop environment (gnome). I installed a few programs(sudo, chromium, tor) and saw that everything was working correctly. I shutdown the system with the command "shutdown now". Then I booted into windows to make sure I hadn't broken anything there (which I did not), but when I tried going back to Debian, it booted to a black screen with a cross as a pointer. By pressing ALT CTRL <FKEY>, I can effectively get to other virtual terminals and login there, however trying to start the desktop environment with "startx" results in the same thing.
I installed Debian on an external hard drive and made four partitions, boot, /(root), /home, and swap.
I also tried to apt-get install --reinstall gnome and apt-get install --reinstall xorg, but the result is still the same
Not actually solved, but in the end just reinstalling got rid of the problem.
View 6 Replies
View Related
Jun 28, 2010
I've installed Ubuntu 10.04 on an old PC with an Intel 845 series motherboard, using an onboard graphics solution. By default, it boots with an 800x600 screen resolution. When I change the resolution to 1024x768, the resolution switches perfectly, but the mouse pointer disappears. The mouse can still be USED, but I have to 'guess' where the pointer is. The only way I have found to rectify the situation is to reboot, upon which the resolution returns to 800x600 again as well. Kubuntu 10.04 suffers from the same problem, only in Kubuntu the mouse pointer reappears when the resolution switches back to 800x600, so I don't need to reboot.
View 4 Replies
View Related
Oct 10, 2010
I just recently installed Slackware onto a virtual machine(I'm planning on buying a new disc drive and 1 TB HDD with-in the next couple of months and plan on Slackware being my primary OS[right now Mac OS X 10.6 is]), and everything went great.
I then went onto edit the /etc/inittab file in emacs and changed the run-level to 4. I don't know why it's decided that I'd want to boot into KDE when XFCE is installed and in the configuration I selected XFCE but it's not really relevant(I have a WM guide thing open in another tab and will probably be able to change it).
The problem is, as the vague title may suggest, is that it basically freezes when I'm at the log-in screen. The input field for the username is highlighted and blinking, and the cursor it self is visible in the centre of the screen, but it simply doesn't pick up on any input from my keyboard or mouse.
I tried booting up the install CD and logging in as root, mounting sda4(which is the root partition) and editing said file but sudo isn't installed(to my knowledge) on the install disc and when I do the command,
Code:
View 8 Replies
View Related
Oct 22, 2010
I have a Dell Vostro 1220, with Intel 4 Series Express Chipset Family graphics card. I work on OpenSuse 11.3 (64bit), on the latest kde.I work on an extended 1680x1050 screen on the left of my laptop screen (1280x800). I set this with Kxrandr and it worked great,a while... Now, it shows a black band on the right side of my laptop screen. I can live with that. But the mouse does not recalculate for this difference, so that I need to click 1 inch to the right of where I want to click.
View 2 Replies
View Related
Oct 31, 2010
I'm running Ubuntu 10.10 which I recently installed on this emachines w3107. For some reason, while doing whatever I may be doing, my screen will flash off and on for about a minute, then when it stops flashing; there is no mouse pointer visible. I can still use the mouse, but it's ghost-like.
View 1 Replies
View Related
Jun 3, 2011
I have been trying hard to configure wizardpen for my ubuntu laptop.wed abletSetupWizardpen link for the info. Still it doesn't work. When I put stylus pen on the tablet, mouse pointer goes to the top left corner of the screen and stay there. Not sure what is going wrong.
root@salil-Laptop:~# cat /usr/share/X11/xorg.conf.d/70-wizardpen.conf
Section "InputClass"
Identifier "wizardpen"
[code]...
View 4 Replies
View Related
Jun 3, 2010
Did a quick search for these symptoms and couldn't find anything related. After upgrading to 10.04 I found that the computer (HP NC8000) now crashes frequently and at random intervals. It occurs sometimes after only a few minutes, other times after an hour or two. It happens while its in use, or while its idle, wether the screensaver is on or not, even if its locked and the lid closed. When I walk away and come back I find the screen has gone blank (except for the Mouse Pointer and a cursor in the top left) and the Caps Lock Light and Num Lock Light are flashing (signifying a crash)
I caught it while I was using it and watched as the screen suddenly went blank as described above. No errors or explanations or warning. A reboot restores order, but not for long. Some assistance with diagnosing this would be helpful. I suspect it could be ATI radeon 9600 mobility related, as with each passing version of ubuntu it seems to be more unstable
View 7 Replies
View Related
Jun 25, 2011
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Jan 4, 2011
I just reinstalled openSUSE 11.3 KDE 4.5, and my mouse pointer keeps auto-clicking. It's weird because it is not even happening 100% of the time, just _most_ of the time. I am using a touchpad, and I have disabled tapping.
I had this exact same issue with Kubuntu 10.10 yesterday before I removed it. I am currently on Windows 7 and all seems well, so it is probably is a Linux software issue.
View 7 Replies
View Related
Feb 19, 2010
No matter what kernel I select to boot into, eventually I lose the mouse pointer visibility. If I move the mouse around, stuff does get highlighted, I just can't see the pointer as it moves. CTRL/ALT/BKSP does bring up a logout menu (doesn't kill X, tho), and I can tab thru it...time wasting, although it does come back from a restart with all the windows as before.
I'm running Gnome. Cpu is AMD Athelon 64 3800+ OS is 32 bit. I didn't normally have this problem before. Do I need to return to 11.0 ? Is this a Gnome problem or an X problem. I seem to remember that KDE4 had a utility that would grab the pointer from the ether and stick it back on the screen
View 9 Replies
View Related
Nov 28, 2010
I'm using 11.2 > Gnome When I (re)login to the desktop there is no mouse pointer, however the mouse is working. Hover shows emphasis and I can click once hovered. I have to go into Configure Display Settings on the Display icon in the panel and hit Apply. That restores the pointer itself. No changes, just Apply. The login screen has a mouse. Mouse Properties > (all tabs) are all default values. The mouse works perfectly other than that.
View 4 Replies
View Related
Aug 30, 2010
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies
View Related
Mar 2, 2010
I installed Suse 11.2 recently, and i have my laptop hooked up to a HD monitor.
When i choose the HD monitor, if the resolution is low, lets say 1280x800, same as my laptop, its fine. I see the mouse pointer.
But as soon as i change the resolution to 1920x1080, the pointer disappears. Mouse functionality works allright. Right click/left click works fine, and i can see the buttons getting highlighted on mouse-ever.
But the pointer is gone.
View 4 Replies
View Related
Nov 14, 2009
When computer idles for 20 minutes & I return, the cursor is completely gone & cannot be retrieved, though the mouse looks like it is working, just no cursor. Also my monitor keeps changing parameters, I tried to set Sax2 but it won't save changes? What do I do? I didn't notice the cursor thing until I set up the screensaver to go off at 6 minutes.
View 9 Replies
View Related
May 15, 2010
I am using Ubuntu 9.10 for about three months now (I am a total greenhorn) . A few hours ago, I decided to add the KDE 4.4 desktop environment. I followed the procedure on this link. It was all in GUI, no terminal commands required. [URL]
Installed KDE and everything is fine except two problems.
1. The KDE mouse pointer has become default in GNOME and I just can't change it. Tried everything, changing theme, customising theme and even downloaded the "mouse pointer" app from Software Centre. Nothing works.
2. I am not able to upgrade anything using Kpackagekit. It keeps telling me I don't have authorisation, without asking for my password.
View 4 Replies
View Related
Mar 9, 2011
I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.
View 8 Replies
View Related
Mar 21, 2011
Fresh install of 32-bit 11.3 on my father's computer.He needs me to enlarge the mouse pointer and/or make it a different color. I changed it in the settings/themes thing like you are supposed to, but it appears to only take effect in Mozilla.needs the larger mouse pointer for the entire system. Evolution appears to completely ignore the mouse theme settings.
View 1 Replies
View Related
Jul 21, 2010
I am using Ubuntu 10.04 on a laptop with a Synaptics touchpad. While testing an install of Bluetooth drivers I booted my computer into recovery mode so I could find out if Bluetooth worked before networking was installed. The system reconfigured the graphics to low VGA which disabled the mouse. I rebooted (normal startup) uninstalled the bluetooth drivers, but my mouse still won't work. The mouse pointer appears in the middle of the computer screen, and stays there.Enabling mouse keys support enables me to move the mouse by holding the Function key and pressing numpad characters,t this is only a temporary solution.
View 2 Replies
View Related
Mar 15, 2011
I have done three times clean install for this and still i can't find what causes it.
When i do my clean install and configure my installation, after reboot i can login.
I see the login splash and then, i see a black screen and the only thing i can do is open applications with ALT+F2 command and change TTYS to login as root and i can move my mouse pointer. When i startx with root everything works awesome... Probably i changed something i musn't... Can the option "start everytime with new session" cause it, if yes how can i fix it and if not what can i do?
View 3 Replies
View Related
Sep 2, 2010
I've got a problem with my openSuse 11.3 for a few days. This is my first Linux so i'm kind of rookie.OK, let's start.I installed it something like 1 month ago and everything looks good until now. When I turn on my PC and try to login (deskop mode) login bar goes from 30% to 50% and then appears a black screen, nothing more, just deep black (cannot type anything etc.) I use GRUB - Windows, opensuse deskop mode and failsafe mode. Failsafe mode works good, but I have no idea what should I do because I didn't change anything. I even done a reinstall of OpenSuse and after one day I've got the same black screen.Someting wrong with grapfic card drivers? (ati 4850, downloaded from ati page, works good for 1 month) maybe some kind of new update which was installed automatically?
View 3 Replies
View Related
