I got a problem with my opensuse 11.3 machine. Sometimes it doesn't boot up correctly and ends with a frozen white screen. It's not just x that is broken the whole pc is frozen as I can not ping or ssh into my machine
View 9 RepliesI have a repeatable and annoying problem that seems to be connected with the graphics card driver of nvidea. I had another card before (7900 card) and I have after having had a malfunction now a nvidea 430. Mainboard Gygabyte with AMD 790 Chipset, GB Ram. The opensuse system is fully patched and updated, newest kernel but the same error occurred with another graphic card and with the precedent kernel and with the precedent nvidia video driver.
Now, the problem is as follows:
System is dual boot with options:
openSUSE 11.4 64 bit
[code]...
1st install no good, but did second to fix some possible mistakes.Booted to login prompt and then, after login, nothing until entered telinit 4, then scrambled screen, then changed to probably the normal screen background of grey/white with numerous white globes, but nothing else and cursor moved, but wouldn't function on occasions also got box with login name, password locations.Got message of "Display not set" and that the problem was so complex it couldn't be explained with these minimal resources.Did third full install and changed screen option from my known resolution with framebuffer, to safe standard, but no improvement.Lilo was installed to MBR, and had 2 partitions flagged as bootable (/ and /boot).Found nothing on forums or FAQ, but suppose could give change of kernel a shot, but as used what cd started with, that seems unlikely.
View 6 Replies View RelatedI run a HTPC which I recently upgraded 11.2 -> 11.3.Most things work fine but I've got an oddity. After the TV is shut down and restored the mouse cursor is "frozen":The old mouse image stays where it isHowever, the mouse IS active, in that you can (blindly) move the mouse, see it mouse-over widgets, and activate them - there's just no visible cursor where the hotspot is.Hardware is ATI chipset (can't remember which, offhand, but it's only a year or two old), running AMD driver, with a HDMI link to the TV.
View 2 Replies View RelatedThis is the 2nd time this has happened. I installed 11.1 & 11.2 later. After the install I would get the login screen just fine and then when it starts running everything goes white. It is an issue with compiz and my graphics I assume. The interesting part is in opensuse 11.0 I had all compiz items not installed. When I installed 11.1 & 11.2 they reinstalled. For next time is there a way to not have these installed on the install? What I had to do was login in a different session other than Gnome. Then go into yast and remove compiz. Then logout and log back in with gnome and the white screen is gone.
View 9 Replies View RelatedI created bootable USB stick in Ubuntu the hard way in console. When I am booting and when my status bar is half full with white color I get white screen, where is the problem please?
View 9 Replies View RelatedI have installed openSuse 11.2 in vmware that is a virtual box on win7 ,last time when I logged in I tried to change some desktop effects. [COLOR="rgb(0, 0, 0)"]When I again started suse , up to login screen everything was working fine. but after logging in I am getting a COMPLETE WHITE SCREEN and everything gets stuck ...
[/COLOR]
Main problem: newly installed Suse 11.2/Gnome from DVD i586 goes to white screen after auto login. I re-installed once with same results. I have limited understanding of linux.
System: Biostar M7NCD Ultra mainboard with NForce Ultra 400 chipset, AMD Barton 2500 (overclocked), GForce FX5200 NVIDEA video.
FYI: I used this exact video card on an older mainboard and ran linux with it no problem and all hardware checks out okay when I drop in a HD with XPpro on it, which makes this a linux software problem by my reckoning - video setup most likely. I can boot to the green Startup Options screen and then my ignorance starts to show.
I wanted to boot to level 3 then try some things (init 3, sax2 -r) I've read about on this forum and from www search but I'm password blocked in level 3!? Install only asked me for one password and it doesn't work here.
How do I deal with the level 3 password issue?
this is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
I installed Ubuntu with a partition that was too small for any practical use, so I installed it again, thinking it would simply overwrite the other one as Windows would do. Obviously not. Now I have two Ubunto installations, neither of which work. I get a White Screen after the Ubuntu thing that shows its progress. If I try to boot from the CD, the Ubuntu thing works again, then I get a completely garbled screen which is totally unreadable and unuseable. I should also mention that I originally installed with a 19" square flatscreen from HP, but have upgraded to an Acer H233H. Since I have no clue what to do whatsover Ubuntu is just taking up space. I'd like to be able to use it, and I'd like to be able to get rid of one or other of the installations.
View 9 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I have a Gigabyte GA-MA790FX-DS5 with an AMD Athlon 64 X2 and 4GB RAM. The MoBo does not have embedded video. My main video card is a Diamond Radeon HD3650 PCIe. I was unable to initially install F 10 as the screen would blank out (Black Screen) after it would start Anaconda. I attempted to boot using the suggested option of nomodeset with no change of symptoms. I then switched out to an older PCI video card (NVIDIA GeForce FX5200) and was able to go through the install. Now I am attempting to switch back to my preferred card (HD3650) and just before the GDM screen appears the screen goes to solid white and no ability to switch to another VT. I have been unsuccessful at finding any workarounds for this. I thought the issues were with the older proprietary chipsets pre open source of ATI which was supposedly older than the R500 series, but I guess I'm wrong.
View 1 Replies View RelatedI have been using Netbook Remix 9.10 and it's been great until this morning.
Today when I turned it on, after Grub and the loading screen, the system brought up a smaller white screen in the corner with my username@machinename"~$ as the first line.
This looks like a terminal window. I can see my folders and use the system but I get no GUI anymore. Not sure why this is happening.
Tried booting into Recovery and updating the system, but to no avail. I've also searched the forums for the last few hours but have not found anything similar.
Anyone have any idea what to do? code...
Not sure if this is relevant to my problem or not. However, I do remember this happening on my desktop version of 9.10... that was solved by installing 9.04.
I recently downloaded Ubuntu 9.1 and burned it to a CD. However, I can't seem to get it to boot. I got to the main menu and selected to run it directly from CD, and the Ubuntu symbol showed up saying it was loading things, but then the screen went black and nothing happened even if I waited over 15 minutes. During this time the HDD light was flashing every second or two, and I could see about three white pixels at the top most row of the screen.
View 8 Replies View RelatedI recently Installed Ubuntu 11.04 on my Compaq evo n800c
CPU-Pentium 4
RAM-1GB
HDD-60GB (yeah i know, it's old)
GPU-ATi Radeon Mobility 7500
Installation went fine but when I boot in Ubuntu I get a MS-DOS like workspace that asks for my login and password. When I give it my credentials,it just says welcome in text and thats it. Now if I go into recovery mode and choose any of the options [normal boot/failsafe-graphics boot] the screen goes completely white. I spent hours searching Google for a solution but nothing worked. what is the problem and also what will be the solution for it.
10.10, and I am havingn interesting issue.During boot, right after POST and right before the bootloader screen with the progress bar and Ubuntu logo, my monitor goes completely white. However, almost instantaneously it starts to fade to black, and eventually goes away. I know it's not the white screen of death that I've heard about, because next I can log in and use my computer just fine.If anyone could point me in the right direction to try to fix this, I would greatly appreciate it. Even filenames related to Ubuntu boot would help, as I'm still learning.
View 4 Replies View RelatedAfter installing 11.04, I have enabled the Nvidia proprietary drivers and I see this (picture of problem is attached) at startup and shutdown. About nine out of 10 times, I cannot get to the log in screen (even in recovery mode); however, on the tenth try, everything works properly and I can even play games, ex. Braid and World of Goo. I get about 3700 fps running glxgears.
I have run nvidia-settings and dpkg and various other things in an attempt to get it sorted out. Additional Drivers says that the "driver is activated but not currently in use." I'm not sure why that is.
the power went off in my house for a split second but it was enough for my computer to die as such linux refuses to boot, i reinstalled ubuntu 3 times now and still nothing.. the only way i can get it to do anything regarding booting is if i have a windows xp install disc in the dvd drive. other than that, bios posts and then i get a pure black screen with a white prompt and it sits there i did however find the boot info script and ran it so here is the results:
[Code].....
I downloaded a debian whezzy media after installation when the system begins to boot the system appears a white screen, and not from any error.
View 2 Replies View RelatedI get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
Loads to the screen where you choose between regular and recovery, select e for the normal boot to see boot commands.
The GNU GRUB 1.98 boot reads as follows:
What do? ubuntu 8 worked fine, i ran an update to 10 and it did the same thing. i figured i would try debian since i have it on my other 2 computers. this is being installed on a desktop with a radeon 9800 graphics card. i know the card is the problem because of a driver issue (as i've read) but how do i get it.
complete trying newbie trying to get to grips with linux. Tried ubuntu and didnt like that so someone suggested fedora. I'm having the same problem I had with ubuntu, I get a white screen when trying to load the graphical install after the media test. On ubuntu this was solved by selecting simple graphics mode. Here I have tried the following commands during install with still no luck
The text install just freezes after selecting the keyboard layout so that does not even work. Tried searching for forums but only solutions I could find where the previous.
I was able to install fedora 9 just fine. But now when I go to install fedora 10 right after the anaconda installer starts the screen goes white.
View 1 Replies View RelatedI started installing ubuntu and it goes thourgh the loading screen then it goes stripped white.
View 2 Replies View Relatedconfig is pentium D and nvidia 7300 , plus 1 gb of ram ; ok they had an 11.2 opensuse version and installed 11.4 from a cd (or dvd) they bought in a shop , the pc is working ok, but upgrades are NOT , how come ? This looks stange to me
- in init 3 : zypper cc && zypper ref && zypper up does not work : after reboot using "shutdown -r now" the pc is frozen, with the green screen and white lizard (no access to keyboard, nor to grub options), ctrl+ alt+ f1 is ko for example.
- in init 3 and only with 3 repos (oss, non-oss, and update of 11.4) a zypper dup works but a bug with mozilla firefox 4 brading opensuse which is ko . we continued , can one package break down a zypper dup ? ( same ko result : after reboot usinf shutdown -r now the pc is frozen with the green screen and white lizard (no access to keyboard, nor to grub options) )
Just installed OpenSuse 11.4 successfully on my machine (E-machines T6212). Previously attempted to install Ubuntu 11.4 on it as well. Both OS have resulted in my computer screen turning white with blue lines and the entire system freezing; unresponsive to keystrokes and even keyboard CAPS/NUM lights don't respond. Only way I can get system to come back is to physcially unplug it, not even power it off with Power button.
I believe there is something with my graphics card that may be the culprit; ATI Radeon™ Xpress 200M - ATI Radeon™ Xpress 200M Specifications
Because for both OpenSuse and Ubuntu this problem came up.
However with OpenSuse I am able to get to the Terminal Screen via : 1- On startup typing '3' into the screen and getting into 'grub' I think it is called.
I am not able to GUI.
I have read: Configuring Graphics Forum Page l in the forums here as well as looked into the Radeon page for the drivers.
I have also found the following thread here dealing with my particular graphics card but :
1-In my 'xorg.conf.new' file in my /root the correct driver "radeon" seems to be listed.
2-I added "radeon" to my 50-device.conf file in /etc/X11/xorg-conf.d/.. directory
Today brought some new updates. I did the updates and while not required I did a restart. Then it goes to a black screen with a solid white line in the top left corner (flashing). It does not boot. I held down the power button to shutdown. When I press the power button, I get the Dell splash screen, then it goes to a black screen with a solid white line in the top left corner (flashing). Nothing like this has happened before
View 9 Replies View RelatedJust upgraded to 11.3 from the terminal. There were a few hiccups, but it said to run "zypper verify," and it downloaded a few files and finished. When I rebooted, the graphics were fine, but the arrow in the middle of the screen is frozen. I can move the mouse till I get carpal tunnel, but the arrow ain't gion' nowhere. So how do I "unfreeze" my mouse? (Besides knitting it a sweater!) I'm hoping for a "ctrl/f2", and that aterminal can be opened that way, with a command to wake up the mouse dameon.
View 3 Replies View RelatedI was configuring my visual settings and thinking that my pc could handle the max setting I enabled it. Now I cant see or do anything. Is there a way to reset them???
View 2 Replies View RelatedI'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...