OpenSUSE Install :: Can't Boot From Hard Drive / Resolve This?
Feb 18, 2011
I am trying to install opensuse on an IBM 8188 desktop with a single SATA hdd. The software appears to load just fine.. standard install but when I reboot the box .. believing it should just boot from the hard drive I get the message no OS installed. I've adjusted the bios and the drive order and I have changed to install parameters for APC or APIC.... you know what I mean... doesn't matter NO JOY IN MUD VILLE.
View 9 Replies
ADVERTISEMENT
Oct 17, 2010
I'm using opensuse 10.2 when I rebooted the my pc I got the message (in the url).P0216_171010 | Flickr - Photo Sharing!I can not boot into tty1 or tty3,5. I tried to repair with Opensuse CD but can not.
View 1 Replies
View Related
Feb 6, 2010
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
View 9 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Jul 6, 2010
I have recently created a KDE 4 desktop using suse studio, it boots up fine on my machine, but doesn't shutdown!!
On my mum's laptop, which I will be using it most on, (it's windoez) it won't start KDE 4 at all! I can use the console, but I wanted to impress her with the amazing GUI and Compiz. And you can't make presentations or browse the web in a console, can you?
And sudo poweroff and sudo shutdown -h now don't work either!
View 9 Replies
View Related
Apr 4, 2010
I am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
View 2 Replies
View Related
Mar 5, 2010
I bought a Samsung N150 netbook with the idea that I would install Linux on it.Now that I have it, I learn that it will *only* boot from the hard drive. there any Linux distribution that can install itself on this machine? Preferably in a separate partition allowing boot to either Linux or Win 7.This needs to be a high confidence installation, because if the existing Win 7 installation is screwed up there appears to be no way to recover.
View 14 Replies
View Related
Dec 14, 2010
I just built a 11.3 live usb stick using kde amd64 image. I can go through a full boot up, but when X start I get a blank srceen(Samsung SyncMaster PX2370) on my desktop. I really do not know where to start.
View 4 Replies
View Related
Jul 19, 2010
I'm trying to partition/format a new external hard disk for backup and have run into a snag that now prevents my computer from booting. In the description below of what happened please bear with me as I do my best to remember the commands and screen output (which for obvious reasons I don't have in front of me).As root.The disk was subsequently writable. However, I then realized that the default start and end cylinders had resulted in a very small partition apparently occupying some free cyclinders in the beginning of the disk.
So next I ran fdisk again, deleting the sdc4 I had just created and creating a new one instead, this time using the cylinders at the end of the disk. When I exited fdisk I got a message something like that the new tables can only be read upon a subsequent reboot. I ran mkfs again, but not e2label. Indeed using /sbin/fdisk -l, sdc4 still had the small size as defined initially. So I rebooted.
Now when it comes up I get something like "checking filesystems. fchk.ext3: can't resolve 'LABEL=/media/LaCie2TB1'" and am prompted to login as root to correct. I tried to simply delete sdc4 again but that didn't help. I also tried to edit /etc/fstab (using vi, which I don't know at all) but it kept telling me that this is a read only file, even though permissions are rw for root.Can anyone out there help me so that (1) I can boot into my computer, and (2) I can correctly partition and format the hard drive??
View 2 Replies
View Related
Jun 9, 2011
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
View 1 Replies
View Related
Feb 20, 2010
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies
View Related
May 11, 2010
I would like to increase the storage space available to users. I am planning on adding another 120gb hdd and want it available to users in their home space. Is that possible? Also, what happens if you change hardware? If I changed my cd drive to a dvd-rw will suse 11.2 simply find the change and update the system (like in windows)
View 3 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
Jun 14, 2010
I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
View 9 Replies
View Related
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
View Related
Jan 22, 2010
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive.
However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.
Do I need to do something more like remove /dev/sdd ?
View 4 Replies
View Related
Mar 28, 2010
i have download openSUSE and can't get it to mount on my hard drive i try and try but it sill won't stay on the hard drive. i like what i see on this os but can't use it.oh the PC im trying to put this os on is a hp m8530f a very good PC at that but i want to use this openSUSE.
View 3 Replies
View Related
Oct 21, 2010
j have just installed suse linux 11.2 on my pc , the problem i am having is i cant use my windows hard drive . i have downloaded and inatalled NTFS-3G and still it wont work . i can access the windows hard drive and look at what is on it ,ie pics , music ,films.
View 9 Replies
View Related
Oct 23, 2010
I've added a 1TB hard drive as a second hard drive on my PC, mostly because my home partition is full of music and movies, but I am unsure of where to mount it (or what to mount it as). "Yast Partitioner" suggested /tmp /srv or /localI basically want a storage solution for media files which can be accessed by multiple users (including a windows PC using samba)
View 9 Replies
View Related
Mar 14, 2011
I've got a weird bug sinds I've updated to 11.4. On boot, the main hard drive isn't recognized as /dev/sda but it changes from time to time (probably according to other removable medias plugged in or not). It has been sdb, sde... but not sda anymore.
The trouble is that it boots and then it tries to find /dev/sda2 (the root partition). As it doesn't find it asks me sether he should take "SAMSUNG...whathever...-part2". Answering Yes solves the problem. But then, if I change in Grub the /dev/sde2, it still keeps changing of name. How could I have my hard drive back to /dev/sda2 ?
My /etc/fstab:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UYB03169-part1 swap swap defaults 0 0
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UYB03169-part2 / ext4 acl,user_xattr 1 1
proc /proc proc defaults 0 0
[code]....
View 9 Replies
View Related
Jan 15, 2011
I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
View 2 Replies
View Related
Dec 31, 2009
I have a Chrome OS .iso that I can booting from CD but only in text mode [the computer has issues] and I want to live install it to the hard drive, but all I have is the linux prompt. Is there a command to do that? I tried install, but I still don't know what to do.[I'm fine with a complete install overwriting everything]
View 5 Replies
View Related
Dec 30, 2009
I got a new laptop, a Dell D400. I want to swap my hard-drive from my old laptop into the new one, and did so... but then got an error stating that my CPU didn't support PAE.
As far as I was aware I hadn't actually installed a kernel with PAE enabled [as I always pick a real-time kernel for audio work]: but then read that lots of the newer distibutions are enabling PAE by default [which is what's caused the problem].
Is there an easy way of disabling PAE in the existing kernel? Or would it be easier to downgrade to another version of OpenSUSE? I'm on 11.2.
View 9 Replies
View Related
Feb 26, 2010
I came in this morning only to find that the Intel Core2 hyperthreading Dell machine is dead. It appears the processor is fried.
I have a new white-box X2 system that I will replace the dead Dell with. The X2 (AMD) does not have a hard-drive (HDD) so, I will simply put the SATA hard-drive into the PC.
Some of you may know how to do this, but I don't know where to begin after I get the Hard-drive in. (I know how to move a Windows configuration from one PC to another and handle it as it begins to blue screen (BSOD), but I don't have a clue with Linux)
This system was built with GRUB. At the very least, I expect the GRUB boot managet to surface on the display. But, what next....
I was testing an OpenSuse setup as a server. Nothing fancy and NO applications added. The only customization was the MB's LAN card and the display was set at 1024x768. I had 2 users, root and myself. What would you do? Is there some boot time options that I should follow?
View 9 Replies
View Related
Sep 6, 2010
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies
View Related
Jun 12, 2011
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
View 9 Replies
View Related
Feb 9, 2010
I downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:
Machine: Compaq presario C767TU
HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS
Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,
[code]...
View 9 Replies
View Related
Apr 17, 2010
I just wonder how to best partition a harddrive with essential folders.
My current installation has a layout like this.
The rest is in '/' integrated.
Does it make sense to give more folders a own partition? And if so, how much should you apply to each folder?
There are 2 users on the computer and there is nothing special or big installed.
I have currently 2 more harddrives which host music/picture & movie data's.
The reason for my question is just that i want to save my data in case of one folder failing.
View 3 Replies
View Related
Jul 26, 2010
Subject: grub no auto update new hard drive.doc Date: 07/26/2010 03:48:45 PM grub no auto update new hard drive.When installed 11.2 on Western Digital VelociRaptor 150 GB hard drive and now installed 300 GB VelociRaptor drive. Your grub does not update correctly to identity the op systems after the new drive is imaged; youre kidding right? I request that you provide the instruction for correcting this; you must have and auto update for grub.
[Code]...
View 9 Replies
View Related
Dec 7, 2010
When I first installed the openSUSE, I had to extract whole iso to sda4, because there was some kind of with CD (scratched or something like that), Now I want to add this part to grub, so that when I want to reinstall it, it will be ready for me. I tried doing this with yast, but could't figure out whole thing.
My current setup:
kernel image: (hd0,4)/boot/i386/vmlinuz-xen
initial ram disk : (hd0,4)/boot/initrd-xen
root-device:/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4
vga-mod:1024x768, 24 bits (mode 0x318)
optional parameters: resume=/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 splash=silent quiet showopts
This tries to do it, but gives error while trying to boot.
View 1 Replies
View Related
