I have a Chrome OS .iso that I can booting from CD but only in text mode [the computer has issues] and I want to live install it to the hard drive, but all I have is the linux prompt. Is there a command to do that? I tried install, but I still don't know what to do.[I'm fine with a complete install overwriting everything]
View 5 RepliesI would like to increase the storage space available to users. I am planning on adding another 120gb hdd and want it available to users in their home space. Is that possible? Also, what happens if you change hardware? If I changed my cd drive to a dvd-rw will suse 11.2 simply find the change and update the system (like in windows)
View 3 Replies View RelatedI did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive.
However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.
Do I need to do something more like remove /dev/sdd ?
i have download openSUSE and can't get it to mount on my hard drive i try and try but it sill won't stay on the hard drive. i like what i see on this os but can't use it.oh the PC im trying to put this os on is a hp m8530f a very good PC at that but i want to use this openSUSE.
View 3 Replies View RelatedI'm using opensuse 10.2 when I rebooted the my pc I got the message (in the url).P0216_171010 | Flickr - Photo Sharing!I can not boot into tty1 or tty3,5. I tried to repair with Opensuse CD but can not.
View 1 Replies View Relatedj have just installed suse linux 11.2 on my pc , the problem i am having is i cant use my windows hard drive . i have downloaded and inatalled NTFS-3G and still it wont work . i can access the windows hard drive and look at what is on it ,ie pics , music ,films.
View 9 Replies View RelatedI've added a 1TB hard drive as a second hard drive on my PC, mostly because my home partition is full of music and movies, but I am unsure of where to mount it (or what to mount it as). "Yast Partitioner" suggested /tmp /srv or /localI basically want a storage solution for media files which can be accessed by multiple users (including a windows PC using samba)
View 9 Replies View RelatedI've got a weird bug sinds I've updated to 11.4. On boot, the main hard drive isn't recognized as /dev/sda but it changes from time to time (probably according to other removable medias plugged in or not). It has been sdb, sde... but not sda anymore.
The trouble is that it boots and then it tries to find /dev/sda2 (the root partition). As it doesn't find it asks me sether he should take "SAMSUNG...whathever...-part2". Answering Yes solves the problem. But then, if I change in Grub the /dev/sde2, it still keeps changing of name. How could I have my hard drive back to /dev/sda2 ?
My /etc/fstab:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UYB03169-part1 swap swap defaults 0 0
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UYB03169-part2 / ext4 acl,user_xattr 1 1
proc /proc proc defaults 0 0
[code]....
I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
View 9 Replies View RelatedI got a new laptop, a Dell D400. I want to swap my hard-drive from my old laptop into the new one, and did so... but then got an error stating that my CPU didn't support PAE.
As far as I was aware I hadn't actually installed a kernel with PAE enabled [as I always pick a real-time kernel for audio work]: but then read that lots of the newer distibutions are enabling PAE by default [which is what's caused the problem].
Is there an easy way of disabling PAE in the existing kernel? Or would it be easier to downgrade to another version of OpenSUSE? I'm on 11.2.
I came in this morning only to find that the Intel Core2 hyperthreading Dell machine is dead. It appears the processor is fried.
I have a new white-box X2 system that I will replace the dead Dell with. The X2 (AMD) does not have a hard-drive (HDD) so, I will simply put the SATA hard-drive into the PC.
Some of you may know how to do this, but I don't know where to begin after I get the Hard-drive in. (I know how to move a Windows configuration from one PC to another and handle it as it begins to blue screen (BSOD), but I don't have a clue with Linux)
This system was built with GRUB. At the very least, I expect the GRUB boot managet to surface on the display. But, what next....
I was testing an OpenSuse setup as a server. Nothing fancy and NO applications added. The only customization was the MB's LAN card and the display was set at 1024x768. I had 2 users, root and myself. What would you do? Is there some boot time options that I should follow?
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies View RelatedI am trying to install opensuse on an IBM 8188 desktop with a single SATA hdd. The software appears to load just fine.. standard install but when I reboot the box .. believing it should just boot from the hard drive I get the message no OS installed. I've adjusted the bios and the drive order and I have changed to install parameters for APC or APIC.... you know what I mean... doesn't matter NO JOY IN MUD VILLE.
View 9 Replies View RelatedWhat I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
View 9 Replies View RelatedI downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:
Machine: Compaq presario C767TU
HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS
Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,
[code]...
I just wonder how to best partition a harddrive with essential folders.
My current installation has a layout like this.
The rest is in '/' integrated.
Does it make sense to give more folders a own partition? And if so, how much should you apply to each folder?
There are 2 users on the computer and there is nothing special or big installed.
I have currently 2 more harddrives which host music/picture & movie data's.
The reason for my question is just that i want to save my data in case of one folder failing.
Subject: grub no auto update new hard drive.doc Date: 07/26/2010 03:48:45 PM grub no auto update new hard drive.When installed 11.2 on Western Digital VelociRaptor 150 GB hard drive and now installed 300 GB VelociRaptor drive. Your grub does not update correctly to identity the op systems after the new drive is imaged; youre kidding right? I request that you provide the instruction for correcting this; you must have and auto update for grub.
[Code]...
When I first installed the openSUSE, I had to extract whole iso to sda4, because there was some kind of with CD (scratched or something like that), Now I want to add this part to grub, so that when I want to reinstall it, it will be ready for me. I tried doing this with yast, but could't figure out whole thing.
My current setup:
kernel image: (hd0,4)/boot/i386/vmlinuz-xen
initial ram disk : (hd0,4)/boot/initrd-xen
root-device:/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4
vga-mod:1024x768, 24 bits (mode 0x318)
optional parameters: resume=/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 splash=silent quiet showopts
This tries to do it, but gives error while trying to boot.
I have a dual boot windows XP/OpenSuse 11.3 system running from a hard drive. They are both 32 bit in spite of the fact that the system can run 64 bit.
I would like to upgrade to Windows 7 64 bit (the wife insists, not yet a Linux possibility) and OpenSuse 11.4 64 bit, but having the programme files on an SSD for faster loading, with my data files on the existing hard drive.
I'm happy with the notion of getting the SSD going as a dual boot system. With Windows, as I understand it, it can tell it fairly easily where to look for the "my documents" folder on the hard drive.
However, the Home directory in Linux is not quite the same. How (if it's possible) could I run the SSD but use my existing Home directory on the hard drive?
I am running OpenSuse 11.4 with Gnome3, with 2 hard drives. One is for the system and has three partitions - root, swap, and home. The second is only data storage. Last week I started getting popups stating I had a hard drive going bad. I checked SMART status in disk utility and had several bad sectors on the system drive, so I cloned the drive to a new one with Clonezilla. Here is where everything went kooky. When I booted the new disk I had a ton of errors at boot along the lines of unable to find a drive. Upon closer inspection I realized the the system located the drives by device id instead of the traditional /dev/sdx. So I started playing with grub settings but never could get it to stop looking for the old hdd. Next, I popped in my net install disc and found I could do an upgrade install which proceeded normally. When I rebooted, no more boot errors, but I get to the black screen with spinning cursor and it will not proceed any further, I even let it run overnight and when I woke up, spinning cursor. As for troubleshooting, I was able to CTRL+ALT+F2 to a console and log in as root successfully but not as a user. When I try to log in as a user, I enter my username, then password, the "have a lot of fun" flashes by quickly and I am returned to a login prompt. I logged in to the console as root and created a new user and tried logging in again, but same thing. I am able to do an ls -l on /home/mike and all my files are there and the listed permissions look ok. I am at a loss as to what to try next. My old hdd will still boot, I just pulled it to reduce risk af data loss. I have never used auto yast before but I always see the prompt for it during an install. Can I clone the system with auto yast on to a different hard drive. Does it strip the by-device-id from the image? Which logs should I check?
View 5 Replies View RelatedI recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies View RelatedTrying to recover data off a shot hard drive. XP system. says I don't have permission to open the drives/folders.. not the owner...
View 6 Replies View RelatedHere's what i'm trying to do: i have a 300GB IDE hard drive that has a OpenSuse build. I am trying to replicate this HD so that i can have another box similar to the original one...my second drive is 500GB SATA.
So far, I just ran a 'dd' command to copy the 300GB to 500GB. Now, after having read on internet, i realized i need to change fstab & /boot/grub/menu.lst. specifically, we need to change for ex:/dev/disk/by-id/ata-Maxtor_7L300S0_L60LCJ0G-part1 to /dev/disk/by-id/sda1 i did use a Ubuntu LiveCD to access the fstab and changed the line as mentioned above. Now, how do i change the menu.lst?? right now, when i try booting up from this HD, i have issues. specifically, i get this error message: could not find /dev/VolGroup00/LogVol00
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
I am installing a new hard drive to replace my old one that contained the /var and /home directories. I don't want to copy the whole directories, especially from home because there is a lot I don't need in it.What I need to do is set the mount points for the two partitions I have made on the new drive to /var and /home, but it will not let me do this with the other drive still running. I can't unmount /var and /home while the computer is running, and I would guess that having two drives with /var and /home on them would not work.
So, how can I set the mount points on the new drive and copy the files I need from the old to the new one? It would seem that would require two /home partitions to be mounted at the same time, but I don't think that is possible. I am sure there is some way, probably many ways knowing Linux so please,
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
I recently installed openSUSE 11.4 on another hard disk of my 11.3 machine. I have another drive in my computer that is used solely for extra storage. Before installing 11.4 I could boot my computer with or without the drive installed, but now if I try to boot without it I get Error 17 from GRUB. I don't understand this as there is nothing on that drive that should be needed by boot and I can find nothing in the GRUB configuration that references the drive.I am getting ready to clear the whole system for a fresh install anyways, but it would be nice to know for future knowledge what is causing it.
View 9 Replies View RelatedIt started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
I have a setup with 3 hard drives. The first hard drive has windows 7 and is a solid state, for my fast computing needs. The second hard drive has another copy of windows 7 on one partition and Ubuntu 11.04 on another (and SWAP space).The third hard drive is just storage.Grub is installed on the first(SSD) hard drive, as well as the MBR (master boot record) for the two windows installs (select win7 in grub, then it lets me select which windows install to boot).Now I want to get rid of my solid state drive, and just run from the second hard drive with dual boot.How can I install a new MBR on the second hard drive without having to re-install both OS's?I've tried removing the first hard drive and using bootrec.exe to re-write the MBR and it will not work.I can install grub, and it boots to ubuntu but when I try windows 7 it says there is no MBR.
View 9 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.