Slackware :: Install And Boot On USB Hard-drive?
Apr 4, 2010
I am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
View 2 Replies
ADVERTISEMENT
Feb 20, 2010
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies
View Related
Jun 24, 2010
I have two SATA hard drives in my slackware 13.1_64 Desktop.
On 1. Drive I have 3 partitions for Win 7:
/dev/sda1 - Some Win 7 boot partition
/dev/sda2 - Win7
[code]....
View 9 Replies
View Related
Jun 30, 2011
Can Slackware 13.37 boot from a USB 320gb hard drive?
View 5 Replies
View Related
Mar 12, 2011
I have a desire to boot Tripel windows7 arch and Slackware but unsure how to partison my hard drive??
View 5 Replies
View Related
Jun 18, 2011
I am taking a course to truly learn Linux and am attempting to install Slackware 13.X to a separate USB hard drive. The intent is to keep Windows while learning Linux, and all I have to do is insert the USB drive when needed. I am using cfdisk and have no difficulty getting to the point where it wants me to partition the hhd. However, whether I have the USB connected or not, it will always present the HDA for partitioning. How do I tell cfdisk to recognize and set partitions on the USB hard drive? (i.e.) What is the command?
View 9 Replies
View Related
Oct 21, 2010
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
View 3 Replies
View Related
Oct 17, 2010
I'm using opensuse 10.2 when I rebooted the my pc I got the message (in the url).P0216_171010 | Flickr - Photo Sharing!I can not boot into tty1 or tty3,5. I tried to repair with Opensuse CD but can not.
View 1 Replies
View Related
Feb 18, 2011
I am trying to install opensuse on an IBM 8188 desktop with a single SATA hdd. The software appears to load just fine.. standard install but when I reboot the box .. believing it should just boot from the hard drive I get the message no OS installed. I've adjusted the bios and the drive order and I have changed to install parameters for APC or APIC.... you know what I mean... doesn't matter NO JOY IN MUD VILLE.
View 9 Replies
View Related
Mar 5, 2010
I bought a Samsung N150 netbook with the idea that I would install Linux on it.Now that I have it, I learn that it will *only* boot from the hard drive. there any Linux distribution that can install itself on this machine? Preferably in a separate partition allowing boot to either Linux or Win 7.This needs to be a high confidence installation, because if the existing Win 7 installation is screwed up there appears to be no way to recover.
View 14 Replies
View Related
Jun 9, 2011
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
View 1 Replies
View Related
Feb 6, 2010
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
View 9 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
View Related
Jan 15, 2011
I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
View 2 Replies
View Related
Mar 29, 2011
I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
View 11 Replies
View Related
Jan 23, 2010
I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
View 2 Replies
View Related
Mar 20, 2010
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
View 8 Replies
View Related
Mar 6, 2010
I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies
View Related
Aug 25, 2010
At first I thought it was the daily cron jobs, but it's been at it for like 3 or 4 hours. It's driving me crazy locking up my system. I suppose I should get off the computer anyway, no real reason to be on for so long.
The only things that look weird in system monitor is kwin, virtuoso-t and X seems to be higher CPU usage than it should. And CPU usage is 20-50% when I'm not doing anything. It was indexing my files.
View 2 Replies
View Related
Nov 1, 2010
I'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
View 8 Replies
View Related
May 17, 2011
Currently I'm running a smaba on slackware 13.1 with a 1TB Hard drive for dumpng files rather than sharing. My partition table is as follows:
#####################################################################
/dev/sdb2 swap swap defaults 0 0
/dev/sdb1 / ext4 defaults 1 1
/dev/sdb3 /home ext4 defaults 1 2
[code]....
Now that i need to add 2 more 1TB hard drives and I want to stripe these two drives to make one partition for large space.
View 4 Replies
View Related
Nov 29, 2009
Just installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).
View 1 Replies
View Related
Jul 19, 2011
Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
View 11 Replies
View Related
Apr 22, 2010
I have Slackware 12.2 installed on my computer, as well as a Windows Xp. I have a hard drive named '/fat-d', which is formatted to be 'fat' and is normally used under XP. This drive can also be accessed under Slackware, both as root and the normal user.I can not write to the directory '/fat-d' when I am not root, it is normal since 'ls -l' shows that its owner is root and other users have no permission to write. The problem is that, when I tried (as root) to change the owner to the normal user:# chown [normal_user_name] /fat-dI got an error: chown: changing ownership of '/fat-d/':Operation not permittedBut how can the root have no permission to change the owner?
View 6 Replies
View Related
Oct 1, 2010
I just lost over 300gb of files due to my external hard drive crashing.There was an error with the files system.I tried formatting on Slackware but cfdisk didn't work for me.I'm looking for something much easier with a GUI or something similar to the Disk Utility that you get in Ubuntu.And also which format do I format my external harddrive to?Something even more stable than ext4 or ntfs? Cause I do not want my external hard drive to crash again.
View 7 Replies
View Related
Mar 25, 2010
I just partitioned and installed slack on a 1TB hard drive. I then run KDiskFree under KDE, and saw that I am missing about 300Gig! Is it just a simple thing between bytes and bits like MS. Or is this an issue I can not ignore? I have 3 partitions. One is my swap, one is ext4(slackware is on) the last is a jfs partition.
View 7 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Feb 5, 2010
I have Window XP on my hard drive and now I can't get it to boot for some reason? I think it might have something to do with the MBR. I removed the drive when I was trying to make a liveCD USB boot drive . Do you think grub took it off or something. Not sure if this is something I can fix in the terminal or not
View 9 Replies
View Related
Mar 19, 2010
I cloned a Fedora 12 hard drive to a new hard drive using Seagate DiscWizard. Everything appeared to go well. However the new hard drive will not boot. How do I make it bootable?
View 5 Replies
View Related
