OpenSUSE Install :: Formatting A External Hard Drive?
Jun 12, 2011
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
I have a 250GB external hard drive that I want to format to ext4. It will be used to store back ups of my documents, music and pictures. I tried booting the Ubuntu 9.10 Live CD (amd64) and using gparted to delete the partitions that where on the hard drive leaving only unallocated space, then creating one new partition that was ext4. I clicked apply and after a short time it said all operations completed successfully.
Now the problem is it won't let me transfer any documents onto the hard drive, or even create a folder or file. If I go into the properties of the hard drive, under the permissions tab it says I am not the owner...?
I have this 1.5 terabyte external hard drive. It has some bad sectors and although I keep reading that you can't really do much about them, I'm going to reformat the hard drive. I was just wondering what utility would be best, or because it's NTFS and I need it to be NTFS afterwards, should I just do this on Windows?
I'm trying to partition/format a new external hard disk for backup and have run into a snag that now prevents my computer from booting. In the description below of what happened please bear with me as I do my best to remember the commands and screen output (which for obvious reasons I don't have in front of me).As root.The disk was subsequently writable. However, I then realized that the default start and end cylinders had resulted in a very small partition apparently occupying some free cyclinders in the beginning of the disk.
So next I ran fdisk again, deleting the sdc4 I had just created and creating a new one instead, this time using the cylinders at the end of the disk. When I exited fdisk I got a message something like that the new tables can only be read upon a subsequent reboot. I ran mkfs again, but not e2label. Indeed using /sbin/fdisk -l, sdc4 still had the small size as defined initially. So I rebooted.
Now when it comes up I get something like "checking filesystems. fchk.ext3: can't resolve 'LABEL=/media/LaCie2TB1'" and am prompted to login as root to correct. I tried to simply delete sdc4 again but that didn't help. I also tried to edit /etc/fstab (using vi, which I don't know at all) but it kept telling me that this is a read only file, even though permissions are rw for root.Can anyone out there help me so that (1) I can boot into my computer, and (2) I can correctly partition and format the hard drive??
how I can format my hard drive with Ubuntu on it. I have a disk with windows vista home basic on it and it wont let me install windows until I have formated the hard drive.
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
Tired of fat32 fragility, I reformatted a 4GB pen-drive as ext4 using Yast's partitioner. I chose format as ext4 and checked fstab options "can be mounted by user", "no access time" and "ordered journaling". I thought that these fstab options would be ineffective since a removable device won't be added to fstab. when I insert the pen-drive it auto-mounts and the folder /media/EMTEC is created (EMTEC is the volume name). The relevant mount entries are:
There's no fstab entry, as it should be, and there is a mtab entry corresponding to the pen-drive, /sde1. However the /media/EMTEC as created (by udev, I suppose) is owned by root, I can't write to it. But if I change (as root) the /etc/EMTEC folder permissions so it belongs to the regular user, i can (obviously) write to it *and* it stays so *between* remounts. Haven't tried a reboot yet. What I'm not sure is if ordered journaling is OK for a pen-drive - or any kind of journaling, for that matter. Or will this significantly decrease flash memory life? Also, the fstab options set in Yast appear to be remembered by whatever creates mtab, as well as /media/EMTEC permissions. Is that so? Where are these settings kept? How does this work?
I'm trying to format a 500 GB external drive with gparted in ubuntu 10.10 (I searched & didn't see this issue in the forum). I set up and formatted two partitions, one for fat32, and the other with ext3, which appears to format ok, but I can't use it. Both partitions show up and appear to mount, but the ext3 partition won't accept activity (make new folder, copy in files), while the fat32 partition works fine. Both partitions show up ok when I query in terminal "sudo fdisk -l"
I am wondering if any of you technical guys would be willing to format my Western Digital external USB 1.5 TB Hard Drive to Linux EXT3. I am naturally happy to pay for your time and trouble and for postage. The WD drive is for storing video footage and will be connected to my Humax Freesat HD Digital TV Box(not a computer), and the Humax Box will only record high deffination programmes in EXT3 format. I've tried to do the job myself with my PC, but have failed to change my system to format in Linux.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My external disk does not appear as mounted on the desktop (It's e-Sata and NTFS, samsung 1.36 Tera bytes ) There's nothing in /media, nor it appears on the desktop as mounted. What can i do to be able to use it?
I have been trying to figure out how to format my hard drive when I'm installing Fedora 11. When I boot from the live disk, all installation were done automatically, so I didn't see how I can do it. I tried googling it, but didn't find anything on how to do it either.
I have only known about Linux software for the past couple of weeks. I want to install Ubuntu 10.10 on an older desktop I have so I can become more familiar with it. I am average in knowladge about Windows OS and MS-DOS. I tried to install Ubuntu and I get an error message about the harddrive. The CD I am booting with will load on my other PC with Windows XP on it. I have only let it run on it long enough to verify that it is bootable.
I have made a floppy boot disc following the instructions on another Linux site about Ubuntu. I have also tried to boot my alternate PC with the floppy and it boots up. The harddrive on my working PC is a Maxtor 40gb formatted with NTFS file system. The harddrive in the older desktop is a Western Digital 80GB WD800LB-55DNA0.It worked fine with Windows XP on it. I also made a Western Digital DATA Lifeguard for DOS floppy and it boots with it.
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
is there a way to install Ubuntu -from- an external hard drive. For example, let's say, you have a complete Ubuntu system with everything (no need to download additional packages/softwrae/etc anymore) , but you can't use remastersys to create an ISO with it because it is way over 10GB in size. Much larger than any DVD you could burn that newly created ISO to.. (besides remastersys is limited to the size of a DVD-r anyways)
Maybe someone has tried this before? Someone has created a dedicated large hard drive that is essentially the same thing as a ubuntu installation usb flash drive, to boot from an then install Ubuntu onto another "new" hard drive? I think it would be nice to have a hard drive (external usb or even better, an internal hdd drive i could hot swap to each new computer I have that I wish to install it onto.. ) And I think it would be so much faster to install from a Sata internal HDD drive than a USB pendrive or a cd/dvd rom, right?
I have downloaded UBUNTU 10.04 and saved to external hard drive since I have no CD drive in my note book. I want to install it from external hard drive what is the command and how can I install it.
I have a 40 gig external drive that I want to use for Linux. I want the complete install of Ubuntu 10.10 on it so that I can boot straight from there. I tried for hours to accomplish this. The instructions I saw for the issue were for an older version of Ubuntu, and the menus have changed since then. The furthest I got with the project is creating a bootable disk on my drive; it will boot from the drive, but not the full installation. It brings up the menu just like it was a live CD and gives you the options to either "Try Ubuntu" or "Install Ubuntu." I have installed it straight to the drive, but it will not boot from it. My computer does give me the bios option to select boot priority with USB external drives.
I'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503 usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
I made a new partition on my hard drive, and installed Windows XP on it. However, because of space shortage on the disc (didn't bring my external HDD's with me) I could not "afford" to make the partition bigger than about 7GB. Turns out that's not quite enough. So I thought I'd try to resize the partition. Booted from my Ubuntu LiveCD and entered the partition manager. I'm able to tell the program that I want to resize the Linux-partition (so it sets the now freed space as "unused", but when I chose to "resize/move" on the XP-partition I do not have any free space. Does this mean that I have to resize the Linux-partition (until now I didn't actually resize it, only set the job as "pending" hoping that I could select both to shrink the Linux-partition and extend the XP-partition in one session), or do I have to format the XP-partition and make a new one (larger this time), then reinstall XP?
I have a computer that was given to me and is no longer booting up properly. It's an Acer with VISTA installed. I would like to format the hard drive and start over with Linux. I don't have the original windows vista disk, I don't believe the computer even came with one, and no back up disks. Apparently this is the only way to format VISTA. When I am in the command prompt here is what happens.
C:> format c: The type of the file system is NTFS. Enter correct volume lable for drive C: I don't know the correct label.
Searching on the forums I found this. format c:/fs:NTFS/p:/ That doesn't work. I get this: "Invalid parameter - /p:"
I have ubuntu 10.04, and I want to have all 3 main OS's operating on the same computer.So I have linux as my main system, windows in a virtual machine (virtualbox) and now I have a Mac OS X Snow Leopard CD that I'd like to install onto a 1 TB USB external hard drive...The only problem is that I don't know how to install it to the hard drive, since it plugs in through USB.
my problem here in not 'how to install ubuntu on an external HDD' but the thing is that after installation,i play around a bit in ubuntu(install on my external HDD). ok,so the external HDD is connected through usb. My problem is ,is it safe to install ubuntu on it? As i am using an external HDD from : Western Digital Element 500GB, so when i shutdown ubuntu ,i hear(from the external HDD) a sound like a sudden stop,for example,when you are playing a movie from it then ,you just unplug it.It not the sound when you make a safe remove,then unplug it. i am worried as it may cause some problem to my external HDD over time. So ,tell me,do you think i can go on with this?
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
So I just reinstalled OpenSUSE 11.2 and I went from having 20-30 mbps speed to and from my 1 tb usb ntfs external hard drive to having about 1 mbps transfer speeds now. Is there any suggestions for how I can fix this? I know it can go faster, I just need to figure out how. and would setting acpi=off at boot affect this?
Opensuse 11.2 KDE 4.3 64 bit EXT4 main disk NTFS external
(Just to clarify: This has nothing to do with the 11.4 mount problem with external NTFS drives that is stickied in this forum.)
I have this 2 year old WD Elements drive (500GB) that is NTFS formatted and that I've used for backup all this time, until a few months ago it failed to be recognized by any computer. The power supply is working, so I first requested a new cable, which didn't help, and now I received a replacement. But still I would like to save some of the data on the hard disc. I need to have this figured out within this week as I have to return the old drive, or they will charge me for the new.
So far, the only software to still recognize the drive was a WD analytical tool for Windows. It didn't find any problems or show any error messages as far as I could tell. They recommended using testdisk to recover the data, but testdisk doesn't recognize the hard drive in the first place. I also tried KParted, but no success.
I didn't know how to Make a cd image out of the Ubuntu iso so I made a seperate partition in my drive.Now I'm wondering how to delete the windows partition without formatting the whole hard drive.how to create a bootable cd image
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case. *windows 7 is on the internal hard drive and I excluded it from the boot sequence * using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
