With the installation of 11.4 the grub will be installed in the MBR. When I first installed the Opensuse 11.4, restart my computer and get into the boot menu, I found that the OpenSUSE boot item was at the top while Windows Xp was at the bottom. It may cause problem when my parents are going to use the computer (they only know XP). How to set the Windows XP as the first item and the default choice?
View 2 RepliesI am dual booting Windows and Ubuntu 10.10. I installed StartUp-Manager so that I could easily make Windows my default OS upon Startup.I did a sudo apt-get update / sudo apt-get upgrade and now I have a new kernel. This moved Windows down in the list, so now MemTest86 is the default OS upon Startup.I want to make Windows the default always, not just until the next Kernel upgrade comes through.
View 3 Replies View RelatedHow do I change the default OS on grub, and adding more time to make my choice?
View 3 Replies View RelatedEverytime i login my screen resolution is 640x480_60 Then i in a terminal change resolution to 1680x1050
Code:
cvt 1680 1050
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
xrandr --addmode VGA-0 "1680x1050_60.00"
xrandr -s "1680x1050_60.00"
How can i make these settings default everytime i login?
Yesterday I installed on my laptop (an IBM Thinkpad T42) "virt manager" using the Synaptic Package Manager. I'm running Karmic.
As part of the installation, SPM had me reboot the computer (which is dual-booted with Windows XP, which I use less than 1% of the time). The new GRUB screen came up showing two new initial lines, the first 2 of the following 4 lines:Ubuntu,
Linux 2.6.31-19-generic-pae
Ubuntu, Linux 2.6.31-19-generic-pae (recovery mode)
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
When I allow the default choice of the first line to prevail, Ubuntu boots up into a condition in which the Wireless Network Connection fails to open, and in which nothing I've been able to think of makes it open.
If, instead, I scroll down to the third line (which was the initial default choice line, i.e., the default choice line prior to the "virt manager" installation), Ubuntu boots up into a condition in which the Wireless Network Connection operates as usual, viz., immediately.
Scrolling down works, but it would be better, it seems to me, to return to the condition in which the current line 3 either becomes line 1 or else becomes the default bootup choice.
I've used SPM to uninstall "virt manager", but the 2 new intial lines in the GRUB options remain. I understand that with Karmic's version of GRUB, viz., GRUB-2, it is no longer possible to change the bootup menu choices easily.
how I can either eliminate the first 2 lines in my current GRUB screen, or make line 3 the default choice?
I am new user (or not yet) of ubuntu and this forum . I installed ubuntu via wubu instaler as program of windows xp but I cant run it . I dl-ed ubuntu made live cd , booting from dvd-drive is working normally , and my instalation via wubu was fine . Now when I start my pc choice is shown to me on desktop :
-Windows XP
-Ubuntu
But I cant make choice coz windows aint reacting on keyboard . Cant use my arrows to make choice . I got stuck here , I would like to install ubuntu as main OS but I think it is too early since I am newb and just started to learn pc science and programing . I hope to use it just as Windows program at the beggening .Later when I get used to it and learn how to properly install it as partition for itself I will do so .
There in no "torrent client" listed under personal settings> default applications. I don't want the default Ktorrent I want Deluge as my client. Selecting a .torrent file launches Ktorrent. I do not want this action how do I change it?.
View 7 Replies View RelatedI want to use my Thunderbird as default newsreader for rss feeds. When I click on the icon of the website, it tells me that another application is the default. There is an option to browse for another application that I can set as default.But where do I have to browse to find the Thunderbird program. I have to same problem with pdf -files. I want to use acrobat reader as default.
View 1 Replies View RelatedI tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
in maverick the default package installer (when I double click on a .deb) is Ubuntu Software Centre, how can I make the default package installer from lucid (was it called "dpkg"?) the default again? Ubuntu Software Centre is too slow and freezes every time I click on something, can it be replaced?
View 2 Replies View RelatedI need to make a choice on what authentication protocol I want to use for Authentication and Authorization. I was looking at Radius and then literature suggested that Diameter was a better protocol. Keep in mind I need this on a hetrogeneous setup ( linux & windows together). Diameter seemed like a good fit until I discovered that the open source code no longer seems to be maintained ( C/C++).
I was also looking at Kerberos as an option though there is alot overhead with the server. SSL/TLS or EAP? I am looking for simple but secure and am new at the security protocols.
right after updating suse 11.2 via wlan to 11.3 i could not connect to my WPA2 secured Wlan anymore. looking in dmesg i found:
Code:
wlan0: deauthenticating from 00:24:01:e7:94:75 by local choice (reason=3) i found a lot of bugs messages relating to this, including the "fix" removing the network manger. i did remove it, but it did not help. i also removed wpa2 and tried with no encryption, but that showed more errors. so i tried 11.1 live-cd and it worked flawlessly. then i tried kernel 2.6.35-rc3-6-pae from the factory repo. then, i got sick of reading without finding a bugfix and i edited the kernel source myself (no, not dangerous, and yes i knew what i was doing). i commented out line 2963 to 2966 in rivers/net/wireless/hostap/hostap_ioctl.c . well, that worked for the deauthenticating issue, but now i have 40% to 60% package loss in my wlan. again i tried my 11.1 live-cd and it still worked. then i compiled kernel 2.6.37 vanilla from kernel.org, but that, too,
I downloaded the Linux iso and burned it to a CD, but before I boot from it, I want to know how/if I choose which partition Linux gets installed to. I have Linux Ubuntu 10.10 and Mac 10.5.8.
View 1 Replies View RelatedI put windows 7 on my desktop which is a dell E521. I had windows vista on their previously and had a dual boot setup on it. When I installed win 7 on I just did the upgrade so I wouldn't have to reformat my hardrive and now when I boot up it will not show the option to boot into windows or ubuntu.
View 6 Replies View RelatedI can't boot to a choice of guis in OpenSuse 11.3
can anyone advise me on my next move? code...
*edit Nevermind I think I found it on YAST * I have been having trouble finding the "make command":If 'make' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf makeI need to install 'make', 'g++', and all other building tools for suse.
View 2 Replies View RelatedI initially installed OpenSuse on my Laptops internal drive (clean formatted) and everything worked fine. Later I took out laptop's hard drive and put it into a USB enclosure to use as an external drive.
View 1 Replies View RelatedAs I have had some problems using kpagager I've used file asociations to set yast as the default. When I download an rpm the yast icon bounces around for a while and then dies. I assume this means I need another set of yast launch instructions. Suppose I could download to a directory and set it as a repo but would rather just have it launch for rpms as it's quicker. 11.4 KDE 4.6.0
View 9 Replies View RelatedI don't want people to use my machine without my presence since I have a lot of cookies and files stored on this machine. So I hope each time the system starts it shows login window and asks for account/pwd. How can I do it?
View 8 Replies View RelatedI had 11.0 running.I have upgraded to 11.2.After the installation, the KDE environment is not boting as the default, but runtime level 5 boot instead.I have checked my installation and ensured to have KDE4 installed.
View 9 Replies View RelatedIs there a standard compiler provided with the install of openSUSE?
Like gcc...
Has anyone tried the cool font that comes default in Ubuntu 10.10 on openSUSE 11.3? Although I hate Ubuntu, I loved the font and the interface is really clean.
View 3 Replies View RelatedI have a problem loging into SUSE 11 64 bit as well as 32 bit. While installing it doent ask me for the ID and password. I tried to install the OS twice...but again it doent asked me anything.
View 6 Replies View RelatedStarting a few days ago, I am unable to leave my kde session using the "leave" facilities. On a fresh login, I can select the leave button and it pops up the menu as per normal. However, whatever I select (logout, shutdown or reboot) nothing happens. I cannot now select the leave button. I click it but nothing happens.
I checked the log messages and see an error posted by kdm that grub-set-default is not in the path. I issue a find and, yeps, no grub-set-default. A week or two ago, I uninstalled CUPS. Went to make tea, came back to find a huge list of stuff being deleted. I had to abort it and spent a long while re-installing loads of stuff, for instance, even Mozzila. Can't find where to get grub-set-default so anybody know where to get it?
This is a new, two days since release 11.2 install on a freshly formatted drive. I lost the KDE 4.3 default semitransparent Desktop Window with all the desktop folders. I believe what happened was when the mouse went across this window, the window side pop out with the X at the bottom appeared, the mouse pointer continued onto the "old style" desktop far away from this pop out and I clicked on blank "old style" desktop. This window appears to have treated this as selecting the X in the pop out, which I probably went over without clicking on my way past it and this window is gone. I have changed to "folder view" since I can't figure out how to restore this window for the "default desktop view".
How do you restore the semitransparent default Desktop Window when its no longer in its own "view"? The jury is still out on the obviously improved, but still not ready for prime-time KDE 4.3. I feel like a Microsoft OS user being forced into using a "new" burdensome/buggy interface I don't want or need at all. Even the KDE 4.3 manual admits some things (only some?) will not work as expected. The KDE 3.5 interface did everything I "needed" quickly and without problems. I've already had enough abuse from MS, please stop emulating them.
I have openSuse 11.2 along with Windows, I get an option on boot to choose between the two OS, but the default is suse. How can I change the default load to Windows
View 1 Replies View RelatedIs there a description of the features and differences between the Desktop and Default kernels? Did "Desktop" arrive with 11.2 and 2.6.31? I did not notice it at first. I loaded 11.2 on a desktop machine and both default and desktop kernels were loaded to system, with Desktop set as default in grub. I have been working thru several "strange" behaviors ever since loading 11.2. At the top of my list has been the ability to shutdown the system from remote logins. I normally connect to the system via a Xwindows package (Xmanager). X works fine and I could shutdown via the GUI (Application Launcher - Leave-Shutdown).
When connected via a remote ssh link, either from a windows machine or a different linux machine, attempts to shutdown (shutdown -H now) send the expected messages, close the remote connections but leave the system still powered on but in a no-remote-connectivity state. When I upgraded to KDE 4.3.4 following the Forum Repository guidelines, I could no longer shutdown via the GUI. In searching about, I found that the Desktop kernel was running. Changed grub, rebooted under default, shutdown under GUI works again. So, for starters, I am trying to decide which kernel environment (default or desktop) should be my target for continuing to work thru issues.
I've lost my GUI while attempting to install the latest ATI proprietary driver. I followed their instructions on how to uninstall it but it didn't give me my GUI back. How do I get back to the default drivers that came with my installation? I have a Radeon 3850.
Booting into safe mode doesn't give me a GUI.
I want to try to reinstall the ATI proprietary drivers eventually. I have them on the hard drive, but I have had no luck installing them using the CLI so far.
i want to reinstall my OS, but use kernel 2.6.31.5 instead of 2.6.31.8. Are there settings in the install that I can change to do this automatically?
View 1 Replies View RelatedSince 11.2 bluetooth is defaulted to always turned on during boot. Is there any way to have bluetooth off as default during boot? I don't want it completely disabled as I sometimes require it but I'd prefer if the BT radio was in the off state as default.Really the bluetooth state should be persistent across boots - i.e. remember the last state.
View 8 Replies View Related