I initially installed OpenSuse on my Laptops internal drive (clean formatted) and everything worked fine. Later I took out laptop's hard drive and put it into a USB enclosure to use as an external drive.
View 1 Replies
Recently i bought an external HDD, and unfortunately my internal HDD is not working.
Instead of buying new internal HDD, can i make external HDD work as internal HDD.
Since a few days i can no longer use my external hard drive (USB). During my quest i noticed the following things: Running openSUSE 11.2 / KDE 4.4.3 / single boot My internal HD is on /dev/sda2 (mounted /) partition manager (YaST) or gparted don't start up (they just hang during start-up) I had to change permissions suddenly to read a CD (i was not in de cdrom group, but i have been using CDs for a while)
Code:
> df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 113306052 84757232 22793136 79% /
udev 2052352 4140 2048212 1% /dev
[Code]....
I've pretty much installed Ubuntu Linux9.10, 10.04 and Debian 5 on external hard drives before, however, I just want to avoid certain pitfalls that may occur with openSUSE11.3. Has anyone successfully done this before? And, is it similar like Debian and Ubuntu installs in that you have to install the OS using an advanced option and specifying /dev/sdb, etc? Right now, I have Ubuntu installed on an external harddrive along with Debian as well and wanted to do the same for openSUSE11.3 and was wondering if all Unix derivatives share similar installation processes. I would just like to keep things as I have it currently where the system does not boot with Grub, and instead I have to go to the bios and specify which physical drive to boot from in order to change the boot order.
View 9 Replies View RelatedIs it possible to install Linux on an external SATA drive?I have a system dual booting between OpenSuse and Windows XP. I wanted to see what other distros were like so I tried installing Ubuntu to my external SATA drive. After installing, I got an error from GRUB, and I had to recover my MBR.I tried the same thing with Mandriva, and got the same result. Finally, I tried another install of OpenSuse 11.2. The result was that I get a grub error 21. The only result of my efforts to try other distros is a lot of experience recovering my MBR.
View 9 Replies View RelatedI have a large external drive, which I connect to my laptop via a PCMCIA card - the machine is old and does not have USB 2.0 built in, so I use the PCMCIA card for that.
I am thinking of the following setup, and hope you can give me some tips on whether or not that would be a sound solution:
- designate a boot partition on the laptop's internal hard drive, which could store kernels
- make up a linux partition (or more than one) to use as root for any distribution on the external drive
- keep /home as separate partition on the external drive
My goal in mind is to be able to boot more than one Linux partition from the external drive. I can't make it through USB boot because the PCMCIA card is not recognized before a kernel module is loaded, and I can't use the internal USB 1.1 port for the external drive.
Do you think this is the way to go? Currently, I only have my /home partition mounted off the external drive.
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
View 9 Replies View RelatedI have an older laptop with a broken CD drive so I cannot boot the CD Drive with my ubuntu image. The laptop does not support booting from a USB drive either.So what I did was take the HD out of the laptop and using a USB enclosure plugged it in to my Win7 desktop. Then I booted from my Ubuntu CD and had Ubuntu install on the USB Drive. Took the USB drive off, and put it back in the laptop. It seems to work except it looks like it was installed with my desktop hardware. Also, every time it boots it starts at a recovery screen asking if for several boot options (including win7 which does not exist on the laptop!).
View 1 Replies View RelatedHow can I install linux using an external hard drive? ANy help would be greatly appreciated. I dont have any CD's or anything and this is my only option.
SO how can I install linux FROM my external HDD ONTO my internal HDD?
I tried two times to make an new partition (after the FAT partition on it) on my external hard drive with YaST>Partitioner.Fist I had tried ext3 now I have ext2 on it.Both times the partition (or the corresponding folder in /media) was only writeable to the superuser/root but not to a normal user (readable to the normal user). Root is the owner.The FAT-Partition on the same external drive is owned by the normal user who was logged in as I plugged the USB-cable in.I can unmount both partitions als normal user in natilus.1. Can I start nautilus as root to change the permissions?2. What have I done wrong? Should I use an SuSE Live-CD or an CD with an special partitioning-program instead?ng X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition.
View 9 Replies View RelatedAny kde app(dolphin, device notifier...) can't see my internal drive with ntfs and any connected flash drive. I've thought that this is problem with missing dependecies or hal but 'lshal -m' shows messages when J connect flash drive so i don't know where the problem is. I've installed all required and recommended and some optional packages from URL...and it has no effect. Does anybody know what i have to do to make it work.
View 2 Replies View RelatedJust installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
this is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
So I just reinstalled OpenSUSE 11.2 and I went from having 20-30 mbps speed to and from my 1 tb usb ntfs external hard drive to having about 1 mbps transfer speeds now. Is there any suggestions for how I can fix this? I know it can go faster, I just need to figure out how. and would setting acpi=off at boot affect this?
Opensuse 11.2
KDE 4.3
64 bit
EXT4 main disk
NTFS external
fdisk -l code...
finally got mostly everything fixed on my opensuse 11.3. 11.3 is my only os on my laptop right now and I want to be able to dual boot with backtrack4. I used to have bt3 but it was on a usb loading up with winxp. Anyway, I've downloaded the iso image and after hours of forum reading I figured out how to mount the iso image. Doing so allows me just to look at the files. Is there an install file somewhere I'm missing?
Also, couldn't ever figure out how to partition my drive to make room for bt4. Tried downloading gparted and failed. Tried using the expert partitioner program that came with this system but it won't allow me to create another partition. Couldn't ever find a reason why. Will bt4 allow me to create a partition upon installation? How do I install?
I recently scapped XP Pro on an old laptop (Toshiba Portege 7220)as it was so slow and I installed Ubuntu 9.10 - All installed ok and it worked fine for about a month. Last week I switched on, got the Ubuntu splash screen and thats where it stayed. I gave lappy to a friend of mine that knows about Pc's (hahaha). When I got it back he said he'd wiped the HDD and partially installed xp. The install apparantly hung after the reformat and copying files onto it.My problem now is I can't boot from HDD, Ubuntu Live CD or Windows CD - Laptop is set to boot from cd then hdd.When I try to boot from CD, the cd is read as I hear the drive being used also see light for cd flashing, after a while i get a blank screen with flashing cursor in top left corner and the cd stops.If I remove the HDD and put it in external usb caddy I can see the windows folders/files when plugged into my desk top.My questions are :-
1. Is there any way to make the drive reusable as a internal drive again as I know it works as an external drive.I would like to reinstall Ubuntu on it
2. Is it a fault with the laptop itself - how do I check
I am running Windows XP on my PC. I installed a new SSD Drive, which is OCZ-VertexII 120GB. I would like to run Windows and Ubuntu 11.04. The Ubuntu 11.04 Live-DVD runs fine, but when I click on Install, I get to the Screen where it ask if I want to install Ubuntu Side by Side with Windows or want to replace Windows, Ubuntu does not recognize the second SSD-Drive. how to install Ubuntu onto the second SSD-Drive and install the Boot loader onto the First Hard-Drive?
View 2 Replies View RelatedI have an HP Pavilion that was/still is running Vista. I recently decided to dual-boot to Ubuntu from an external hard drive. Both systems will boot up fine its just that for some reason it won't boot to the internal drive (with vista) unless the external is connected. I just put the HD in another laptop only to have the same problem.
View 7 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View Relateddoes anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
I was having a hard time installing Xubuntu on a an old Japanese FMV Biblo LOOX S73A, with no internal drive. trying both from a USB stick and from a CD ( I think the USB's were USB 1's, not sure) but it was finally rolling with the CD---the bios lists USB booting- yet things happen, power shortage and the battery was out-
I'm stuck with a broken Xubuntu intall I have 3 grub options, regular, recovery mode and mem test I've tried to reinstall forcing the computer to boot from the CD in the bios, but get "no os found" If I let it boot from the hard drive, I get to Busybox/initramfs commands that I know nothing of. I just want to do a clean reinstall of the whle thing, but cannot find out how to do so. as mentioned this bios has an option to boot from USB CD ROM DRIVE, hard disk, or floppy
[Code]...
Can Ubuntu install and boot from external HD while still booting windows off internal HD?In an attempt to spread Ubuntu my friend wants to use ubuntu off an external HD and still have windows fully operational on the internal HD. Questions:1) Can Ubuntu install on external HD without tricky mounting methods and if so how doabout it?2) The bois have the capability to boot from usb, will grub work?
View 9 Replies View RelatedIm using it in an attempt to backup all of the files off of my dead Windows xp Computer. Right now I am using the 9.10 live disk of Ubuntu and cannot get the program to recognize what kind of file system my internal hard drive is using. (A western digital 320 GB hard drive with partition 1 in NTFS and part2 in FAT32) I would like to be able to back up this drive onto my 1 TB Western Digital external hard drive that is also in ntfs.
Now here comes the wierd part, it won't read or recognize my interal and external hard drives that run those file systems but it will recognize and allow me to read, edit, and access all of the ntfs hard drives on my home network. I did some lurking and tried a tutorial for creating a mount point and on how to force mount a disk, but neither of my disks would show up in Places/Computer. So then I checked the /etc/fstab file and is says,
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
Which I think means that it says I have no hard drives installed or connected to the computer. Yet when I go into Disk Utility it tells me the disk is there and asks if I want to format the disk into ntfs...
Alright, im completely new to linux. I am somewhat knowledgeable with computers in general. My programming instructor for school told us that it would be in our best interest of the course to grab a linux distro and install it on our computers. (Don't ask me why, i dont know)ANYWAY, i am trying to get debian to install on my external USB 1.5TB Seagate HDD Drive. After learning a lot about Murphy's Law, i had to fix my MBR for windows (the windows installation is located on my internal SATA 1.5TB Seagate Drive) because GRUB wouldnt boot to windows unless i had my external plugged in.
So, the natural solution to me was to fix the MBR, unplug the internal, then re-install on my external, it worked. Well to my surprise, this cloud i was on... wasn't cloud 9. NOW, Debian will boot if i have the external plugged in and windows will boot if i have the internal plugged in. The Problem is, when i have both plugged in and my external set as the boot drive i get this weird error and it will not let me boot linux.Now, i have searched for a fix.. But the ones i have tried so far haven't worked or i wasn't sure how to use those fixes(because im new).The error went as follows:/bin/sh can't access tty; job control mode offthen i get a initramfs command line. (I think thats proper terminology)The temporary fix i have going right now is i have my computer open and the SATA cable unplugged so i can boot to Debian.
SUMMARY OF HARDWARE SPECS:1.5 TB INTERNAL HDD (SATA)2 INTERNAL DVD BURNERS3 GIGs of RAM2.8ghz AMD Athlon x2 (I think its 2.EXTERNAL 1.5TB HDDDEBIAN VERSION:I believe its Debian 507 by looking at the download linkhttp://cdimage.debian.org/debian-cd/5.0 ... etinst.iso
A while ago I installed Ubuntu as a dual-boot on my Windows XP machine. It worked ok, but I quickly realised that I had neither the hard drive space or RAM to really run a dual-boot machine properly. So, I tried to uninstall Ubuntu and return to XP. Unfortunately, I discovered that uninstalling is not that straightforward and I've ended up with a theoretical dual-boot but with the HD repartitioned so that Ubuntu takes up the smallest amount of space possible. Because of this, when the machine boots, I still get a GRUB boot screen where I have to manually select XP to continue with the boot. (Ubuntu is still the default boot OS - I don't know how to change this!)
I've now decided to install Ubuntu again but this time on an external USB hard drive. In my head (and this could be wrong) this will give me the option to run the machine with Ubuntu if the external HD is connected or run XP if it is not.I've seen several tutorials about how to do this, but none seem to address the situation where GRUB is the boot loader already. Some tutorials tell me to disconnect the internal HD before attempting to install Ubuntu on the external. Do I really need to do this? Another alternative I've heard of is to download a LIVE cd to the external drive and then run the OS from that instead of performing a full install. Any thoughts?
I have the Debian Lenny 5-0-5 DVD's but they are not live bootable. They come with a setup.exe file which copies over the kernel images to boot from windows. Thing is that at the moment I am running the Ubuntu distro of Debian and cannot use the setup to do it. Can anyone tell me how to boot this disk in ubuntu itself?
Also does the debian installer allow you to choose which disk it installs to?(I am talking about the thing in the ubuntu installer that allows you to partition disks and define your own mount points before the install)
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
If I wanted to install Ubuntu to an external eSATA drive, how would I do that and not screw up the GRUB install on my primary internal drive? I'm guessing I would want to tell that eSATA installation to install its GRUB to the first partition on that drive rather than on my primary internal, but then.... how would I get there from the GRUB on my primary drive?I guess my problem is that the eSATA drive is not always powered up, and I'm not sure what GRUB (on the primary internal drive) would do if there was an entry pointing to a drive that wasn't there (because it's not turned on)
View 1 Replies View Relatedis there a way to install Ubuntu -from- an external hard drive. For example, let's say, you have a complete Ubuntu system with everything (no need to download additional packages/softwrae/etc anymore) , but you can't use remastersys to create an ISO with it because it is way over 10GB in size. Much larger than any DVD you could burn that newly created ISO to.. (besides remastersys is limited to the size of a DVD-r anyways)
Maybe someone has tried this before? Someone has created a dedicated large hard drive that is essentially the same thing as a ubuntu installation usb flash drive, to boot from an then install Ubuntu onto another "new" hard drive? I think it would be nice to have a hard drive (external usb or even better, an internal hdd drive i could hot swap to each new computer I have that I wish to install it onto.. ) And I think it would be so much faster to install from a Sata internal HDD drive than a USB pendrive or a cd/dvd rom, right?
