I'm having a hard time trying to run "FireBird" in my oS 11.2, it seems that everything its installed just fine "firebird,firebird-classic,firebird-filesystem" but i didn't figure out how to startup firebird , there is no rcfirebird or something and it says firebird-classic is xinetd, how to start something on xinetd..
View 3 RepliesHaving installed Firebird-Superserver and it's dependencies via YAST2 software management I don't see fbserver in xinetd. I also installed Flamerobin, which is unable to connect, and Firebird-doc but unfortunately I don't know where to look for the installed documentation. If I log in as root I can run the command;
Code:
gsec -user sysdba -password <password>
but from there I can't communicate with localhost as I get the following error
Code:
Unable to complete network request to host "localhost".Error reading data from the connection.
I try to establish Firebird 1.5.4.4910 on CentOS 5.2. It is established without mistakes. But be connected to a server I can not. The command - xinetd-d deduces:
Service configuration: gds_db
id = gds_db
flags = REUSE IPv4
socket_type = stream
[code]...
At attempt to be connected to a server in magazine there is a message:
May 27 10:20:48 Mikle xinetd[4737]: START: gds_db pid=5399 from=192.168.1.206
May 27 10:20:48 Mikle xinetd[4737]: EXIT: gds_db status=0 pid=5399 duration=0(sec)
May 27 10:20:48 Mikle xinetd[4737]: START: gds_db pid=5404 from=192.168.1.206
May 27 10:20:48 Mikle xinetd[4737]: EXIT: gds_db status=0 pid=5404 duration=0(sec)
Is there a particular distro that would be the 'best' for a newbie to use for developing database applications using Firebird?
View 5 Replies View Relatedknow about the apt-get install <package> command only to install in linux. However, when using this command to try install firebird 2.5 on my Lucid, it is not finding the package, and eventually I downloaded the tar file from firebird site, but after extracting I do not know how to proceed.
View 7 Replies View RelatedI have a Windows-only language lab program ('Logolab') which provides students with listen and repeat exercises on audio and video material loaded by the teacher. It operates in conjuction with a Firebird database which stores subtitles (I think) and the sequencing data (the lengths of each segment) for recording (a recorded piece will be subdivided into small audio/video segments during which the student repeats what's been said).The audio and video functions are run internally by Windows Media Player, and the video input must be in .WMV format for the system to function.Using Wine, I've managed to install the language lab program on Ubuntu, as well as the Firebird database program. However, each time I start the language lab program, I get the message "Firebird database not started!".There is a BIN folder with the language lab software that contains a .INI file with the following contents:
Perhaps that needs to be modified for Linux or Wine on Linux? I've tried changing the DataBase field with the Linux path to the appropriate .FDB file, and likewise the ServerName field to the Ubuntu computer name or the ip address, but to no avail. Lately, I've installed the Linux version of Firebird and Flame Robin (which I couldn't understand).If anyone can provide any help or suggestions, I'd be most grateful (it's the only thing preventing me from migrating 100% to Linux).
Can anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
View 9 Replies View RelatedI am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View RelatedI installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
View 1 Replies View RelatedThe rsync module "opensuse-full" which worked well so far seems currently broken. It tries to mirror a huge number of additional stuff (factory?) but fails with "permission denied". Any place where I could report this?Command:
Code:
rsync -rlpt -hi -stats rsync.opensuse.org::opensuse-full /drive/repo
Errors:
[code]....
This is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:
- Unknown error reading from 'http://download.opensuse.org/update/11.4/'
- SKIP request: User-requested skipping of a file
- Download (curl) error for
[code]...
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
Is there some blog, changelog, or place where i can track what issues get fixed in the opensuse gnome 3 implementation, or what features are bein added, what changes are bein made, etc.?For example, if there is some bug in opensuse with gnome 3, where can i read that it has been fixed in the dd/mm update, or that new feature xxxyyy was added in dd/mm update, etc.Im talking about issues, fixes, updates related to gnome 3 with opensuse. Not just opensuse with 2xgnome or kde.
View 1 Replies View RelatedI am having some problems getting the onboard sound card on my Intel DP45SG motherboard to work properly under openSuse 11.1. Yast appears to have detected the card as a 82801JI (ICH10 Family) HD Audio Controller, but I cannot get any sound out of the card at all.
I have tried to follow this thread, and have run the alsa-info script, the results of which are posted here. It appears to me that the codec that is listed in the alsa script, which is the IDT 92HD73E1X5, is not the same as that which is listed on Intel's site for this board, which is the IDT 92HD73E codec. Can anyone help me out with regards to getting this going? Additional info below:
[Code]...
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code:
mcelog: failed to prefill DIMM database from DMI data
dmidecode seem ok for me
Code:
sharwyn:/var/log # dmidecode
# dmidecode 2.10
SMBIOS 2.4 present.
[Code]...
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies View RelatedWould a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies View RelatedI have 2 pc with Asus AMD boards (M4A87TD Evo and M4A88TD-M Evo) running OpenSuse 11.3.on both the front panel audio headset + mic do not work.on one PC I have an other OS also installed, so I know that on this machine the hardware is working.is there a chance to get the frontpanel audio connectors running with the actual openSuse or do I have to wait for the next version with a newer kernel/alsa version?
View 6 Replies View RelatedI successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
I want to dual boot openSUSE 11.2 and Windows 7. I already have Windows 7 installed but I have encountered multiple issues in the past with trying to make dual boots. Usually when I install Linux, GRUB decides it wants to go into world domination mode, and "breaks" my Windows installation. I have reason to believe this is because the distros I use come with legacy GRUB, (v0.97) and for some odd reason it lacks commands such as "update-grub" etc. This means I cannot add Windows 7 to the boot menu without going into extreme complications, which have NEVER, I repeat NEVER succeeded. When I boot the Windows drive directly, I get some error about GRUB not finding the device, and it puts me into a grub rescue command line. Now I am no expert in this field at all, but wouldn't that mean that GRUB wrote itself to the MBR of...oh I don't know, ALL of my hard drives? I really want to install openSUSE 11.2, but from bad experience I am really put off as I know that it ships with legacy GRUB v0.97.I am also running Fedora 13 at the moment, I have quite an experimental dual boot running..been trying to get GRUB 2 for hours now, it is definitely there but no commands work, "upgrade-grub-from-legacy" and "update-grub" return with command not found. I've heard this is just a bug but can anybody confirm that there will definitely be a way for me to "fix" my windows installation after it gets "broken" by GRUB?Second idea, unplug my windows hard drive while openSUSE installs?
View 9 Replies View RelatedI would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View Relatedright now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies View RelatedI'm trying to diagnose a weird problem ... maybe someone has an idea where to start. I'm having a problem with flash videos. The video part displays as if the fast-forward button is being held down; audio sounds correct.
I'm thinking "synchronization error" (duh!) but I'm not sure how to start to diagnose the issue. I'm running OpenSUSE 11.4 x64, and the problem shows up in both chrome and opera.
Q: How can I allow my users to mount a cifs share without an entry in fstab in OpenSuse 11.4?
I have an answer myself. Until OpenSuse 11.2 I could mount my samba shares by making mount.cifs and umount.cifs setuid root. Today I installed OpenSuse 11.4. Unfortunately mount.cifs isn't anymore allowed to be setuid due to security concerns. Security is not an issue in my case, so I copied the mount.cifs and umount.cifs from 11.2 to make it work again:
1. Download cifs-mount-3.4.2-1.1.3.1.x86_64.rpm from this repository (I use 64 bit):
"http://download.opensuse.org/distribution/11.2/repo/oss/suse/x86_64/"
2. Extract the files mount.cifs and umount.cifs from the rpm and copy them to /sbin
3. Make them setuid root:
Code:
linux-y5qw:~ # chmod u+s /sbin/mount.cifs
linux-y5qw:~ # chmod u+s /sbin/umount.cifs
4. Mount your cifs shares as a normal user:
Code:
martin@linux-y5qw:~> /sbin/mount.cifs //192.168.2.2/data /home/martin/data/ -ousername=martin
Password:
I just purchased a Verizon USB 760 Modem.I purchased the Modem from Verizon because their web site stated that it supported all major OS including Linux.
My system specs are: HP Compaq 6715b Laptop
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.0 (i586)
[Code]...
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View RelatedI have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies View Related