Debian Hardware :: Multiple Sound Devices - How To Change The Default Device
Mar 19, 2011
I recently installed a new sound card, and I need to find out how to change the default device. Currently, I'm dual-booting Windows, and I had re-enabled the on-board audio in the PC's bios. After doing that, Debian started detecting that on-board as the default sound device. Is there a way to set my sound card to be used instead? I found out that the 'alsaconf' utility has been phased out. I"m currently running Debian testing, for amd64.
View 4 Replies
ADVERTISEMENT
Aug 24, 2010
I recently bought a logitech headset which is working very nice, the thing is that I cannot make it my default device when I plug it in. I edited /etc/modprobe.d/alsa-base.conf to make snd-usb-audio the default card but it only works when the computer is turned on with the headset plugged in. A workaround is to plug it and then "alsa force-reload" but I find it very ugly plus it kills all apps using audio and leaves the volume indicator unstable.
View 1 Replies
View Related
May 4, 2011
On my desktop computer (now running the very impressive Slackware64 13.37 and generic kernel), I've got what Alsa considers 4 different sound devices:
Logitech USB headset
Logitech QuickCam Pro 9000 with built-in microphone
ATI HD48x0 audio (which uses the HDA-Intel driver) on my graphics card
Intel 82801JI audio (also using HDA-Intel driver) on my motherboard
When I run alsaconf, it picks up the ATI audio only (which is fine). Later running alsamixer (or any other mixer) all 4 are visible. The issue is that I really would like the ATI audo to be in position 0. Previous to Slackware 13.37, setting up the device positions in /etc/modprobe.d/sound usually did the trick. However, that is now being ignored and one the USB devices are being put in position 0 regardless of what is in sound.conf. This is driving me nuts as a lot of software simply use the default audio device, which I would like to be my speakers, but is now my USB headset.
All of the googling I've done points towards messing with the /etc/modprobe.d/sound.conf file, but as I said, that is being ignored. Is there a more 13.37 way to have ALSA order the audio devices the way I want?
View 9 Replies
View Related
Mar 8, 2011
I have a few websites that travel along with me in my usb stick, and I want to have read and write permisions to files on my usb by other users (i.e.: www-data) actually they have 0700. I'm running maverick (linux mint Julia).
View 1 Replies
View Related
Jul 20, 2010
I've been playing with Ubuntu for a few years, and it runs great on said notebook, so I' m starting to ween myself from Windows.Biggest consideration for switch is music. I currently have an iPod touch 16. Been using itunes for a long time.I'm not married to the device or the software, and will rebuild my music library if needed (it's a pig of a mess anyway).I'm curious which mp3 device you are using and what linux software you are using it with for great results. I want a high end player iwth 16+ gig, and a music manager to keep a 10000+ file library organized. I frequently want to change the mix of albums on my device. I'm fine with buying music elsewhere from Apple. Prefer it actually - Amazon is a good choice.Should I keep hte iPod? Trade it for a Zune or something else? Sound quality is very important to me. As is wireless access/browsing, storage space, battery life, etc
View 2 Replies
View Related
Mar 4, 2010
I want to change the default mount options for removable devices, especially vfat devices, to have shortname=lower instead of the default shortname=mixed mount option. I googled around, and found references to /system/storage/default_options/vfat/mount_options gnome configuration option, but I don't seem to have this option set, actually, I don't seem to have a /system/storage tree in gconf-editor at all. searching in gconf-editor doesn't really yield any results.
View 7 Replies
View Related
May 5, 2011
I have headphones connected via usb and every time I restart computer or disconnect them, my sound output is switched to laptop speakers. Is there a way to make so that every time the headphones are detected, they would be used automatically?
View 1 Replies
View Related
Sep 4, 2011
I have old app that by default is looking for /dev/dsp as an audio device. The source is configured as such and I want to change that so sound will work on current versions of Fedora.
What is the equivalent of /dev/dsp in F15 ?
I think /dev/dsp was the default generic sound device .. ?
View 8 Replies
View Related
Oct 2, 2009
I have multiple gcc compilers in my laptop, how can I change the default gcc compiler?
View 2 Replies
View Related
Jan 19, 2011
Forgive my newness, but here goes. I installed CentOS 5.5 on a Dell with a Soundblaster card. The soundcard config utility recognizes the device as:
Vendor: Creative Labs
Model: CA0106 SoundBlaster
Module: snd-ca0106
I am able to play the default sound in the utility, however, I get no sound when I select the device in Skype as Default Device CA0106. Is there a permission somewhere I am missing, because I noticed when I try to play an internet radio stream using Shockwave Flash, I also have no audio.
View 2 Replies
View Related
Oct 20, 2009
Using an external SoundBlaster USB... set as default in Fedora 11's new sound device manager ( neat btw )...works great... except no sound in Firefox / Flash Player.
View 3 Replies
View Related
Feb 16, 2011
My question is about TCP parameters in Linux. By now, I want to change the default values of:
Initial Timeout
ACK Delay
Idle Connection Timeout
I have a Linux Box with kernel 2.6.x and 2 ethernet interfaces. I know TCP is a stack that doesn't have anything to do with ethernet devices. Said that, the question: is there a way to set custom values for each interface? For example, a server listening to connections in eth0 would use one value for Idle Connection Timeout and another server listening to connections in eth1 could use a different value for that parameter.
View 4 Replies
View Related
Oct 21, 2010
I've been struggeling with this for a few hours now, googleing and so on trying to find an easy way to just switch which device I want as primary for internet connections. After long battles I'm at a loss, this is the current automatic routing
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
85.225.76.0 0.0.0.0 255.255.252.0 U 1 0 0 eth0
85.225.76.0 0.0.0.0 255.255.252.0 U 2 0 0 wlan0
[Code]...
View 1 Replies
View Related
Jun 28, 2010
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
View 6 Replies
View Related
Jul 18, 2010
everytime i use alsamixer command i get only the "Master" volume control, and i see the card its using is "Pulseaudio" so i press f6 to select the sound card and i found that i have "default" and "HDA SIS966" so i wanted to know how can i change that "default" to the HDA SIS966?.i tried pressing f6 and selecting the card but when i close alsamixer and run it again i get the "default" sound card again.
i left some pics, the 1st one is what i get when i run alsamixer, the 2nd is the options i got when i try to change the sound card, and the third is what i get with the card HDA SIS966 which is the one i'm trying to get as my default.
View 4 Replies
View Related
Jun 25, 2011
I want to change the default sound output volume to be high than it normally is when the system starts.
How can i change it?
View 2 Replies
View Related
Jan 21, 2011
I'm using mythbuntu 10.10 with 2 pci tuner cards and 1 SB PCI sound card. My system is detecting my tuner cards as audio devices and making one of those my default sound cardWhich file do I change to make the SB card the default sound card?
View 2 Replies
View Related
May 5, 2011
I am having difficulty changing my default sound card in Kubuntu 11.04. I am able to use Phonon to change it for KDE applications; however, I am unable to accomplish this for VLC and Chromium.
View 2 Replies
View Related
May 20, 2010
I have an old pentium 3 computer that has ~7 NICs installed. These NICs are attached to modems and other networking equipment. According to the linux ping page on computerhope.com, it seems that one could send a ping from a certain specified NIC. How would one go about this?
View 6 Replies
View Related
Jun 20, 2011
In my last installation of debian (Squezee unstable), i dont have problems with the sound.But with my new installation of squezee, when i tried to activate the volume control (With the gnome applet), the system told me this (Aprox):Volume control cant find devices to control. You dont have the correct addons of Gstreamer or sound device configurated
View 14 Replies
View Related
Mar 5, 2011
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies
View Related
Jul 6, 2015
Why is sound mute on debian jessie (top right icon) ?
View 1 Replies
View Related
Aug 22, 2010
New Ubuntu installation with a big problem: no sound.
OS: Ubuntu 10.4.1
Hardware: HP Pavilion Elite e9150t (64 bit)
Sound card: Creative Sound Blaster X-Fi Xtreme Audio
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
[Code]...
View 9 Replies
View Related
Jul 14, 2010
Just when I thought my hardware configuring woes were put to an end, I don't have any sound. Here is my lspci list.
Code:
debian:~# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
And the aplay -l
Code:
debian:~# aplay -l
* List of PLAYBACK Hardware Devices *
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
View 14 Replies
View Related
Jun 20, 2015
So far I've tried to add a number to 'GRUB_DEFAULT=', but it wouldn't want to boot in anything other than Debian or Windows, same with StartUp-Manager...
I currently have the liquorix kernels installed, but I can't get to use them as the standard Debian kernel is always picked. So is there any way to change this behaviour?
View 14 Replies
View Related
Jul 11, 2011
how do you change the default audio output device if you have multiple sound cards?
View 14 Replies
View Related
Jul 22, 2011
I'm installing debian squeeze and and I've got 2 hdd (sda,sdb), but I want to install it on sdb. When i get to the "Install the grub boot loader on the hard disk" it automatically installs it on /dev/sda (and I get an error), I want to install it on /dev/sdb... Is it possible.
View 12 Replies
View Related
Apr 10, 2010
i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
View 6 Replies
View Related
Sep 13, 2010
how to change the default language of gnome.when i boot into x-window ,i can select the language ,But ,if boot into console ,via "startx" to run the w-window ,the language is english,i can't select .my native language is Chinese.i set the right locale .I also searched for it .Someone told to add "export LANG=zh_CN.UTF-8"to $HOME/.xinitrc.there's no this file in my home dicretion.I create it .after that,when i run "startx",it's failed to start x-window.the ~/.xsession-error file shows
Initializing gnome-mount extension
seahorse nautilus module initialized
Unrecognized number formatter: cjk-chinese-simp
Unrecognized number formatter: cjk-chinese-simp
[code]...
how can i change the default language ,i have to .because if gnome is in English ,i can't run the Chines input method.
View 1 Replies
View Related
May 13, 2015
I have a problem on a fresh install of Jessie with KDE. I have three soundcards. In Wheezy I used pavucontrol once for each application to change the sink from the internal to the external soundcard, and that setting would stick each time I rebooted the system (audio would go on the external soundcard). Now each time I reboot the audio gets routed to the internal soundcard and I have to use pavucontrol each time to route the audio back to the external one. URL...
putting this line in /etc/pulse/default.pa
set-default-sink alsa_output.usb-E-MU_Systems__Inc._E-MU_0404___USB_E-MU-0E-3F04-07D80A14-027A8-STATION_01-00-USB.analog-stereo
as well as this one, and issuing:
pacmd set-default-sink alsa_output.usb-E-MU_Systems__Inc._E-MU_0404___USB_E-MU-0E-3F04-07D80A14-027A8-STATION_01-00-USB.analog-stereo
and none of them has worked. I don't know if it's a related issue, but the settings I choose in the for Phonon in the KDE multimedia settings don't stick either. I select the external soundcard as default device and upon reboot the internal one is on top on the preferences list.
View 2 Replies
View Related
