Ubuntu :: Bluetooth Working - Enabled But Not Finding Devices On Scan?
May 12, 2011
I am using Ubuntu, now installed KDE (kubuntu) and I have Bluetooth working and enabled but for some strange reason the bluetooth scan is not finding any devices in spite of the fact that I have my mobile phone with bluetooth on and discoverable. My laptop is HP Touchsmart tm2 2102tu. Here's output of my hciconfig -a
BD Address: 70:F3:95:74:7D:CE ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1099 acl:0 sco:0 events:42 errors:0
[code]....
Neither hcitool scan nor scanning with Gnome or KDE bluetooth settings is working for me.
View 9 Replies
ADVERTISEMENT
Apr 7, 2011
To use my home broadband, I am connected to a wireless router. How can I scan for other devices connected to that router? I am using Ubuntu 10.10.Is there both a GUI and CLI method?The IP of my router is URL... Please rename this thread title from 'How can I scan for other devices connected to that router?' to 'How can I scan for other devices connected to my router?
View 4 Replies
View Related
Jun 4, 2010
It appears that the problem of Bluetooth which I suffer of them in version 12 is still in version 13, where I've upgraded and there are still problem. Bluetooth was working version 12 (before update). I was hoping that the problem is resolved version 13 but still problem I've had:
Bluetooth is connected to usb , but the computer does not recognize
Click on the button enable
View 8 Replies
View Related
Sep 14, 2010
I have the above bt dongle and I am unable to get the device to scan for remote devices. The dongle and bluetooth software is recognized and from a system point of view is working. Using Suse 11.3 64bits
[Code]...
When I scan the blue led comes on solid and goes back to blinking afterwords but nothing is found. I did try another adapter and the bluetooth worked. BTW The Bluedevel application is real nice and works much better then the kdebluetooth app,
View 1 Replies
View Related
Sep 18, 2010
On a fresh install of squeeze (with the exception of some installed video firmware and the latest updates from the repos) from the kde cd.
System is running an ASUS Sk8V motherboard with onboard sound, also a SB Audigy 2 ZS sound card. Speakers are plugged into the sound card.
Sound worked fine before in Lenny except I had to create /etc/modprobe.d/sound with the following to get the system to prioritize the SB card over the onboard audio
options snd-emu10k1 index=0
options snd-via82xx index=1
I've done the same with the new install, and still no audio.
I followed the troubleshooting steps from the FAQ forum, but am stuck on the end, which suggests doing the following:
The following string needs to be added to the /etc/modprobe.d/alsa-base.conf file
options snd-hda-intel model=YOUR_MODEL
View 2 Replies
View Related
Jun 9, 2010
PDF/A is one of the best formats to archive my documents. What Linux software would allow me to scan documents to PDF/A? A PNG→PDF/A or TIFF→PDF/A tool would be fine too.
View 3 Replies
View Related
Oct 30, 2010
i have a vaio, with a nvidia geforce 330m. i upgraded from 10.4 to 10.10, using the same driver i had before (256.44, form the nvidia web site) and following the same instructions i found useful the previous time [URL]. my problem: now my login has no graphic interface: i am displayed this error:
Quote: thermal reporting for required devices not enabled, aborting.
and i can log in and use ubuntu only by command line interface, i tried also to make a clean install using a live cd, but nothing changes. have i to go back and use 10.4?
View 2 Replies
View Related
Aug 1, 2010
I have a bluetooth-enabled notebook and I used to eventually turn on/off the wireless switch, which disabled wi-fi and bluetooth capabilities.Recently I turned on the switch to find the bluetooth icon missing from the Notifications area at the panel. When I type bluetooth-properties at the terminal a windows pops up saying "Your computer does not have any Bluetooth adapters plugged in." No further hardware/software changes were made recently.
View 1 Replies
View Related
Apr 24, 2010
When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
View 1 Replies
View Related
Feb 8, 2010
My bluetooth devices disconnect after a period of inactivity (not sure exactly how long). They're being connected with:
sudo hidd --connect
And I've made no edits to any bluetooth related system files so it should be default settings throughout. I would like them to stay connected indefinitely and it would be even better if they would stay connected through reboots.
View 4 Replies
View Related
Mar 7, 2011
I bought a new notebook HP Presario CQ56 with Linux openSUSE 11.0 Everything works and the Bluetooth device is ON. Also the one in my cellphone. But the one in the PC does not detect any device and ergo cannot configure it.Got Bluetooth Applet 1.8 installed.In #suse and #bluez IRC chats couldn't give me a hand =/
View 5 Replies
View Related
Jun 16, 2011
I have a HCL K21 PDC notebook . In windows there is an driver called wconsole.exe or wireless console which help me turn on and off both blutooth and wlan device but in ubuntu these devices are not turned off. I also tried to to use the device buttons but it get activated automatically (but not in windows).
View 4 Replies
View Related
Jan 20, 2011
I bought this bt dongle, and when i plug it, the operating system detects it and everything seems to be working fine. Although, When I search for devices, neither my phone nor my laptop are found. Searching for devices on both of them doesnt find this computer either. lsusb output is : Bus 002 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
hciconfig -a output is:
hci0: Type: BR/EDR Bus: USB
BD Address: 00:15:83:11:F7:58 ACL MTU: 384:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
[code]....
View 14 Replies
View Related
Sep 5, 2010
I have bluetoothd,hidd,and bluez-simple-agent running. I can manually connect my if I use
Code:
"hidd --connect XX:XX:XX:XX:XX:XX"
However, I cannot get bluetoothd to make any sort of connection automatically. I have hidd running as a server, I see link_key_request(sba=XXXXX,dba=XXXXX) in dmesg when I click the mouse, but I get no connection.
View 1 Replies
View Related
Apr 9, 2010
I use backtrack 4, but I do not know how to set up my wireless, cam, bluetooth and fingerprint ? my laptop is dell xps m1330
View 1 Replies
View Related
Oct 24, 2009
in openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 9 Replies
View Related
Aug 17, 2010
In openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 5 Replies
View Related
Apr 24, 2010
i have the following challenge: i have a Bluetooth GPS device that i have connected to my linux notebook. but now i also want to use the same device (or better, GPS data stream) for my Navigation device (HP Ipaq with TomTom). make an serial port bluetooth service (sending) that my Navigation device can connect to. copy the incoming bluetooth serial port data stream to the outgoing bluetooth serial port.
i have already installed GPSD so i have the TCP port where the GPS data is available for everything on my notebook. but now i also want it to send it out through bluetooth.
1. is there someone out there who already did this?
2. how to make an bluetooth serial port service on Fedora 12?
3. how to copy a data stream from 1 device to the next device?
View 1 Replies
View Related
May 14, 2009
pairing bluetooth devices on Centos? I'm trying to pair a phone (Nokia 6086) with a bluetooth dongle. I've been able to do it on Ubuntu (using the bluetooth applet), but so far no luck connecting it to a Centos machine. Steps I have taken so far:
[Code]...
View 1 Replies
View Related
May 19, 2010
would like to install a Bluetooth and my AT&T 3g fob
View 1 Replies
View Related
Oct 12, 2015
I've followed the guide at URL.... but my computer is unable to find any Bluetooth devices. Whether I'm using the command line or gnome-bluetooth, I don't get any results. If I plug in a cheap USB adapter, I'm able to connect and use the devices.My computer is a HP ProBook 4330s running Debian Jessie. And as far as I can tell the Bluetooth adapter is a Ralink rt3592 combination Wi-Fi and Bluetooth PCI card. The Wi-Fi works fine, but when i try to connect to a Bluetooth device, I get no search results.
View 9 Replies
View Related
Sep 2, 2010
I recently installed the Rhythmweb plugin. I can go to http://localhost:8000 on my own machine and control it that way, so I know that functions properly. My issue is my phone finding the correct path. I have it bluetooth synced, with the laptop device's name being "peter-laptop" (I reset it to the default just for clarity's sake), and my laptop and phone are both on the same wifi network as well.
I have tried many variants of peter-laptop.local:8000 and peter-laptop:8000 but no luck, in opera or the default blackberry browser.
View 1 Replies
View Related
Sep 1, 2011
I actually have two problems: I couldn't get DUN to work with Ubuntu for a while and then one day it just magically worked and would let me find the device and connect to it. And then it broke again. So in my effort to fix the problem it looks like Bluetooth went completely off the rails. When I try to add a Bluetooth device through the manager it just keeps spinning with "Searching for Devices" but the spinning finds nothing (it would run for an eternity if I let it, it seems). hcitool scan reports "Scanning ..." and then drops back to command prompt. hciconfig notes the device is up. The device has no soft/hard locks on it. If anyone has a CLUE about what it could be.
Obvious note: My phone is in bluetooth mode and discoverable so that isn't the problem.
If I make the computer visible, my phone DOES NOT pick up it's there. Also, bluetooth works fine on the Fedora USB stick.
View 1 Replies
View Related
Dec 9, 2009
I'm installing F12 on a new HP ML-350 G6. The machine has 4 Gb memory, and a Smart Array P410i SAS controller. There are two 72 Gb disks set up as a RAID 1. I'm using a full install DVD. There are no other storage devices other than the RAID, a USB tape drive, and the DVD drive. When I try to install F12 it hangs after setting the keyboard type with "Finding Storage Devices". I've let it sit for an hour or more and it doesn't get beyond that.
F11 installs on the machine with no problem. I've used the F12 DVD on other machines with no problem (but not any other ML-350s). If I switch to a console session, dmesg shows the driver for the controller (HP CISS) has loaded and the RAID drive recognized. The appropriate devices (/dev/cciss/c0d0, /dev/ccss/c0d0p0, etc.) are all present in /dev.
View 1 Replies
View Related
Jun 13, 2010
I am semi new to the embedded linux scene. I dont use UNIX much but I have played around with it and know how powerful it is. Currently just finished a degree in Computer System Engineering in the UK and have a whole summer break to mess around doing something. So I have decided to start a project I've been planning.
Starting the project, first of all I need to find a good handheld system I can work on. This is where I'll be importing the code onto/applications. At the moment all I want it to do is boot and run a distro of linux, but in the future I am going to be working on making it 3/4G and wirelessly able.
What I need:
-Size is roughly around the same size as a ipod maybe, or smaller.
-Needs a nice screen, nothing massive but needs to be easily readable.
-Text entry is needed, but im sure a few buttons can do it.. keypad would be really really nice though.
-A 3.5mm audio jack (or something similar to plug headphones into) is needed or it needs to have the capiblity to install this.
-Wifi/3G support, needs to be able to support these in the future or able for me to hack them in.
-Rechargeable powersource.
-Cost, nothing mega expensive !
View 2 Replies
View Related
Dec 17, 2010
i've just installed openSUSE 11.3 on my dell studio xps 1640. but i have problem with my WLAN . it's a WLAN 1640 mini-card and i think there is no problem with driver. because it seems that it's installed correctly but i can't see any wireless networks (it says "Device is not ready"). is there any suggestions?by the way, when i turn my wireless to on (it's a touch key not a switch) only my bluetooth indicator is enabled not my wifi indicator.
View 6 Replies
View Related
Dec 19, 2010
Xsane is no doubt wonderfully competent, but far too complicated for casual use.
But I am having a problem with Simple Scan, in that I can't seem to get selected resolutions to have any effect.
A typical A4 mainly-text document I am playing with, ends up as:
My Epson V200 scanner allows normal resolution selection with Xsane or with Epson's iscan application.
View 1 Replies
View Related
Apr 14, 2011
I've checked under system>preferences>keyboard shortcuts, and the shortcut is enabled but not working.Is there another setting that is conflicting somewhere that i can't find?Something to do with CompizConfig settings manager? (I think but can't be sure that's when they stopped working)
View 5 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Jan 31, 2011
Not quite sure what could be wrong here. The settings are enabled, but none of the compiz functions are working. The were working on Friday. I did some searching but I'm not even sure what the problem is, or how to diagnose it. I'm running 10.10, now.. any help is appreciated. Even if you just tell me what I need to be searching for to find a solution.
View 9 Replies
View Related
