I have installed it (11.3) with KDE desktop.I have a problem with openening a device (harddisc) directly from sysinfo:/It is a ext4 partition, but also with my others (ntfs), this error occurs...
View 9 RepliesI have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
I have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View RelatedSometimes, I am unable to open the CD drawer whether there's a disc in it or not. I have a Dell laptop which gives me approx 4 methods to open the drawer:
1. Press the eject button on the drawer,
2. Type 'eject' from a command line,
3. Press 'fn + f10' on the keyboard,
[code]....
All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies View RelatedI'm starting to push the limit of my /home directory. My machine is Linux/Windows dual-boot. I need to keep Windows as the machine is not "officially" mine, and so might need to go back at some point to a Windows user. All my normal Windows access is via VirtualBox. I have made my Windows partitions as small as possible, and now have an empty D partition as follows:
It's the D* partition that I would like to add to my home directory. Is there an easy way of doing this, or am I looking at a complete re-install of openSUSE?
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I have a clean install of OS 11.4 64bit on my system with K3B installed from packman. Trying to burn files to a disc with the option of no multisession I am getting the error message at the end of the burn "unable to fixate disc"The first time I tried burning it said it did not have permission so I used the K3B wizard to change permissions.Now it simply says "unable to fixate disc"
View 1 Replies View RelatedI have installed moto4lin, as I want to be able to get pictures off my razr v3mM, which I could easily do in Windows. I found a guide for connecting a v3m, but for some reason moto4lin is screwing around with me. Here is my log:
[info] Phone is unplugged. Please connect it
[info] Phone plugged as AT
[info] Switching device /dev/ttyACM0 to P2K mode...
[error] Unable to open device
[error] Please check preferences
[info] Switching device /dev/ttyACM0 to P2K mode .....
When booting up my IBM Thinkpad Ubuntu stalls giving the following messages:
Cannot open root device "uuid=58a5831c-5757-49f8.....
Kernal Panic - not syncing: Unable to mount root fs on unknown-block
Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
I am or was using Hardy.
It seems to me that the program is telling me it can't find the hard drive or the partition where the OS resides. I have my drive partitioned with into sections for booting, the OS and my Home directory.
I have an Ubuntu server x64 (10.04) that is running FOG for imaging Its installed on an Intel server board (1 RU rackmount) I configured the RAID in an Intekl based BIOS utility which Looks similar to This Ubuntu installed and runs perfectly. however im unable to monitor the status of the drives from the OS, so Im unaware of any drive failures that may occur I manged to install megacli but it returns blank data (along with exit code: 0x00) Iv also tryed megactl wich says
Code:
unable to open device /dev/megadev0: No such file or directory
one of my colleagues who had used the server previously was certain that the raid was on board the intel site also makes mention of intel using LSI products in their RAID controllers Relevant section of dmidecode:
Code:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Intel
[code]....
Still getting the "cdrecord has no permission to open the device" error when trying to burn an iso image to a DVD-RW.
I did yet another clean install of openSUSE 11.2 64 on my desktop computer, did updates, added Nvidia and Packman repos (it's not a repo problem as I tried it several times on a totally clean install), added codecs and stuff as advised by caf.
I updated the DVD drive firmware earlier today.
My user is a member of ALL groups.
Drive is an LG GH22NSS50 (sata)
It all works (with the same DVD-RW) under winxp on the same machine.
Is it HAL or something else that blocks permission to devices?
I'm really getting sick to death of this problem, and would be happy just to get rid of anything blocking permissions to the DVD drive.
I'm totally unable to play or mount audio CDs and unable to use video DVD's on my box right now. When I insert an audio CD I get a dialog box saying:
Unable to mount disc: Location is not mountable
and if I check messages in the Log File Viewer I see the following text repeated (save for the last line) a couple of dozen times.
Code:
May 24 13:04:37 Amber kernel: [ 6680.434685] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 24 13:04:37 Amber kernel: [ 6680.434691] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
May 24 13:04:37 Amber kernel: [ 6680.434695] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[code]...
on a similar but ultimately unrelated thread someone was asked to enter a few commands so I tried them and the following was the output:
Code:
main@Amber:~$ ls /dev/scd*
/dev/scd0
main@Amber:~$ sudo mount /dev/cdrom /media/cdrom0
[code]...
An error occurred: Could not open location; you might not have permission to open the file. As far as I can tell I have the relevant CSS libraries installed I'm lost without being able to play CD's and DVD's on my system.
if I want to print a regular document from the main tray, no problem. If I want to print an 8x11 photo from the main tray. slight problem (might be ink related, still researching that side). But if I want to print a 4x6 or a 5x7 from Linux massive problem Printer: HP Photosmart D5460. Will not print from the Gimp at all, I get the following when I try to print a photo using the Gimp: A page from the main tray with text similar to this:
"****Unable to open the initial device, quitting"
Actually for the last several years under OpenSuSE I have never been able to print a photo from the Gimp. It always prints some text error then quits OR will print the error at the top of every sheet in the tray until the printer either is manually unplugged / turned off OR it runs out of paper. The printer I have is listed as working perfectly according to Open Printing dot org. But none of my applications seem to be able to get the printer tray to operate for the smaller photos. Currently I have to copy the images to a card in the printer then print from the card. Unacceptable if you ask me.[URL]... what photo capable printer out there actually works 100% with OpenSuSE? And I mean I can access all the trays from all the applications I could possibly use, as well as monitor ink levels, perform maintenance and so forth.
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies View RelatedMy computer has two hard discs; one contains Windows 7 and the other is completely empty and has a capacity of 160 GB. I want to install Ubuntu and another distro - possibly Fedora - on the empty HD but I am stuck as to how to go about partitioning the drive.Should I partition the drive first so that it is ready for two distros or should I install one of the distros first and then let the second one do its own partitioning?If I should partition the drive first could someone in the direction of a step-by-step guide to this;preferably a guide for dummies. I already created /dev/sdb1 and /dev/sdb2 thinking that these would be the equivalent of two logical drives in Windows e.g. D: and E: but this didn't seem to be the case because when I started to install Ubuntu it asked all sorts of questions to which I did not know the answers so I have now returned the drive to its original state.
View 13 Replies View RelatedI'm having trouble mounting hard drives and partitions - and am rather nervous about using Yast partitioner to do this. Is there something that would tell me about mount points in Yast partitioner? So far I haven't been able to find that information anywhere. I don't want to lose information on existing drives and partitions but do want to be able to access them.Some of them appear under disk information in "My Computer" but if I try to mount them I get this error message.There is no application installed that can open files of the type block device (inode/blockdevice).I was trying to edit fstab,his didn't seem straightforward either. I've been hacking this about in other Linux distros - so not entirely clueless
View 6 Replies View RelatedI rebooted my server and out of nowhere the RAID5 array won't assemble. I've tried everything I could think of to reassemble the thing. I fear that the array is ruined, but I can't imagine how. Here are various bits of information: The simplest failure (with and without partition numbers, which have not been needed in the past):
Code:
richard@nas:~$ sudo mdadm --assemble --verbose /dev/md0 /dev/sd[bcd]
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/sdb: Device or resource busy
[code]...
After happily running a persistent install from a USB stick for a week I decided to delete my Windows install and replace with Ubuntu.
I did the install from the USB stick, selecting the option to use the whole drive.
When the install finished I was prompted to restart. I removed the USB stick and did so. The machine rebooted... and nothing. Just a flashing cursor top left of a black screen.
I've booted the USB stick version and looked at the hard drive. Stuff has been installed sure enough, but it will not boot.
Machine is Acer Aspire 5920 laptop. Running Ubuntu from USB stick has been smooth as silk with no issues.
I'm not technically minded, so I'm afraid that any assistance (for which I would be eternally grateful) may need to be n00b-style dumbed-down.
I am new to linux. I am installing linux in my system which already have windows xp. But when I am trying to install linux , it is not detecting my hard disc and exiting the installation. How to proceed further.
View 9 Replies View RelatedAfter happily running a persistent install from a USB stick for a week I decided to delete my Windows install and replace with Ubuntu.I did the install from the USB stick, selecting the option to use the whole drive.When the install finished I was prompted to restart. I removed the USB stick and did so. The machine rebooted... and nothing. Just a flashing cursor top left of a black screen.I've booted the USB stick version and looked at the hard drive. Stuff has been installed sure enough, but it will not boot.Machine is Acer Aspire 5920 laptop. Running Ubuntu from USB stick has been smooth as silk with no issues.I'm not technically minded, so I'm afraid that any assistance (for which I would be eternally grateful) may need to be n00b-style dumbed-down.
View 1 Replies View RelatedI have two sata HDs. One of these has Debian an Winxp installed. Grub is the bootloader. Grub resides in MBR (on the same disk). Now that I've added that second disk, I would like to test win7 on it. What I would like to do is to be able to choose -at boot time (maybe in bios setup)- between booting from the disk containing win7 or from the disk containing Grub with winxp and Debian. I thought that when installing win7 it would let me choose the disk where to install it and here is where the problem arises.
Win7 installer detects my partitions and lists them as if they were not on different disks. What would happen if I choose to install win7 on the partition I want to (second disk, partition1)? Will win7 create a new bootloader? Now I am a little confused and don't want to keep on going not being sure the results are what I expected. What steps should I follow to install win7 on the second hard disc not affecting the disc with winxp, debian and grub letting me choose between these two Operating Systems?
I have F12 on a 160GB disc, and am now looking to upgrade to F13, but also move the whole system to a 500GB disc.Is there a relatively painless/simple way to do this
View 11 Replies View RelatedI am pretty new to Linux and am need of some guidance/assistance.I have a machine which has a 250gb hard disc, dual boot Windows XP and Kubuntu 10.10 with the following partitions on it:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9727 78132096 7 HPFS/NTFS
/dev/sda2 9728 15806 48829567+ 83 Linux
[code]...
I have a few computers all connected to the same router both wireless and wired. All at the moment are running Ubuntu. There is no problem sharing any of these computer's local drives through the network. However I have one desktop with an external USB Hard disc plugged into it. I would like to share this external hard disc on the network. I set it up to share but when I try and access it from one of the other computers on the network, although it shows up, I get the message "Unable to mount location. Failed to mount windows share".
View 1 Replies View RelatedI finally installed openSUSE along side ubuntu and xp in my ThinkPad EDGENow I am facing issue with toggling the wi-fi, I had no such problem in ubuntu.Seems like there is some issue in the thinkpad-acpi module.I use fn+F9 to toggle the wifi, which toggles both bluetooh and wifi, but on openSUSE it only toggles bluetooth.acpi_listen in ubuntu gives me the below result when I press fn+F9ibm/hotkey HKEY 00000080 00001005but in openSUSE its blank but bluetooth gets toggled. dmesg from ubuntu:
Code:
$ dmesg | grep acpi
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[code]...
Ubuntu wont recognize my disc drive. I installed Ubuntu with Wubi, so I have dual boot. I have the latest Ubuntu. On Windows 7, my disc drive works fine. On Ubuntu, however, the tray wont open. I also tried going to terminal and typed "eject" and "sudo eject" and I receive this message:eject: unable to find or open device for: `cdrom'I'm not sure if it has anything to do with it, but when Ubuntu OS starts up, it takes a while and says "ata3 soft reset failed" or something like that. I had to set the delay to last longer so it could start up
View 9 Replies View Relatedhow could I mount a Toshiba external hard disc drive to my Ubuntu 9.04?
View 3 Replies View RelatedAssume I have plugged in an external USB hard disc.
How can I find out (from terminal cmdline) the file system (ext2, ext3, reiserfs,...) of this hard disc?
From Ubuntu I know the two commands:
sudo blkid -c /dev/null
or
sudo fdisk -l
but these are not known in CentOS.
What are the corresponding cmds in CentOS?
The following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.