I have installed opensuse 11.4 couple of days ago. Installation went smoothly. Everything is working just fine except the screen resulation. My Monitor supports up to 1366*768. The Display Settings in 11.4 gives option of 1366*768, But whenever I maximize any window (say firefox, opera etc) I can not see the close button & scroll-bar. Here is my xorg file of monitor.
[Code]....
i'd like to know if it is possible to up the aspire ones resolution to 1366*768, i've read lots of instances in previous releases of ubuntu, but im using 10.4. I also heard doing it kills the machines performance- is this true?
View 4 Replies View RelatedI am having a bit of an issue with xubuntu's resolution detection. I currently have a monitor plugged into my machine, the xubuntu machine picks up the native resolution of 1920x1080, but for some reason it does not give the option for 1366x768. i find this weird because any monitor that can do 1920x1080 should be able to do 1360x768 as well. The machine is running an intel card, so manual resolution changing via nvidia control panel isnt an option. Im wondering, what is the simplest way to enter a custom resolution into xorg.conf, or any other easy methods of adding the 1360x768 option into the machine?
View 1 Replies View RelatedI am running Ubuntu 10.10 with the NVIDIA Driver 96 on my video card is GeForce4 MX 440. I have brought a new monitor ( View Sonic VA1913w ) but i can not find the right resolution which is 1366 times 768. is there a way i could add it ??
View 9 Replies View RelatedI am using fedora12 and I found that I am enable to set screen resolution to 1024x780. I am getting only two option i.e.800x600 and640x480.
View 7 Replies View RelatedI am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
View 9 Replies View RelatedI recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View Relatedmy ubuntu install is running pretty well, but I need to boot into Windows 7 to print and convert some proprietary OneNote files.The trouble is that while my menu.lst shows a Windows option - and a few others, too, that don't seem to show up in grub2 - grub does not give me the Windows option. In fact, it seems to follow only the contents of grub.cfg.I have tried running sudo update-grub, and it does work, but does not resolve the problem.
View 2 Replies View RelatedI unplugged the Windows drive, during the installation of Ubuntu 9 (to make things easier). 2 separate drives. When installation was complete, I plugged the other drive back in (now both are plugged in). I went to the BIOS and made sure the Linux drive was the set to boot before the windows drive. The only thing that comes before that of course is the cd drive
CD-0
HDD-1 (linux)
HDD-0 (windows)
I booted into linux after this and ran 'sudo update-grub'. The cmd was successful. However, when rebooting it does not give me the option to boot to windows. Why not? PS. If I go to Places (under GNOME bar), Then I can see (and mount) the windows drive. So it is accessible.
I am installing ubuntu on a Dell m7750n machine that has the KSOD. I have done almost everything I can find to fix it. I was able to remove my data off of it using regedit....
So, I am sick of MS and found linux. I installed unbutu netbook on my netbook and it works like a charm.....
So, I went to install this on my desktop dell.... I have read of the many issue with this...
I was not able to boot from the CDlive as is. I kept getting a black screen with nothing. I then used the f6 to get into grub and then choose f6 to change the load options to load nomodeset and was able to load ubuntu from the drive, not install.
I would like to install ubuntu, but when I click on install from the 'tester' version it will not give me the option to install along side another OS (windows) that I see in the install ubuntu main website in the see how to do it.
I get two options:
Erase and use entire disk
Specify partitions manually (advanced)
Question: Can I install and select my own partitions using: [url]
Or, is there something wrong and I need to get that fixed before I install ubuntu?
Is this a DELL issue or KSOD issue?
I get this option if I right click on /dev/sda1. And why is there a triangle icon with an exclamation mark next to it.
View 5 Replies View RelatedThe only options I have are to install via the web, how do I add the cd drive to xen.
View 1 Replies View RelatedI have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies View RelatedA while ago I messed up my Ubuntu installation so I decided to boot the install from the disc again and overwrite it. It turns out the installation disc does not give you the option to replace a current Ubuntu installation so I was forced to take more space out of my windows [vista] installation. This means I now have 1 ruined Lucid Ubuntu OS, 1 Working Lucid Ubuntu OS and a windows Vista OS system. Is it safe to delete my ruined Ubuntu from inside vista? Is it possible to overwrite my Ubuntu installations? How can I delete them both and then install Lucid again?
I want to know this now as Maverick Meerkat will be released on Sunday and I want to install that in a clean installation without deleting my vista installation. I do not have the Vista installation disc because Vista came pre-installed. I am not willing to buy anything.
Does Ubuntu 10.10 allow you to resize your windows partition and install ubuntu on the resized partition? I'm trying to get ubuntu installed on my laptop but the only option it's giving me is to delete all partitions and install ubuntu. I don't want to delete any partitions because I have backups on my second partition and the first partition has windows on it and I would like to keep it.
I've tried 10.04 and it doesn't give the option for resizing but I thought that one of the versions gives he option for this, is it 10.10? I've tried to manually resize but it won't let me because I have to many primary partitions, so I would have to delete the last partition to get it changed to extended correct?
installation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
View 1 Replies View RelatedI use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
Running new installation of 11.3 with KDE Desktop. I have sorted out text appearance and size thanks to pwabrahams in another thread but I have a big problem with screen size/resolution.
In previous installation of 11.1 on the same machine I was able to change the resolution of the graphics in order to fit the windows on the screen more comfortably. I used to use something like 1240 x 1048 but in the System Settings > Computer Administration > Display the resolution is set at 832 x 624 and no higher resolutions are offered.
I cannot find out the details of the embedded graphics controller (10 year old Dell PE6300 server) but the system information report it as ATI Mach64 GI with swrast (No 3D acceleration) version 7.8.2. I have spent several hours reading the many pages on graphics in this forum and have concluded that I should probably be using a legacy driver but have no idea how to change the driver. Of course if it were possible to increase the resolution to 1240 X 1048 without recourse to changing driver that might do it if I knew what setting to tweak.
I have chosen to use automatic login. But every now and then I am asked for username and password when the computer boots. When I do get automatically login the screen resolution is changed to 800 x 600 instead of 1280 x 1024. How do I get those two (resolution and log in) settings sticky?
Graphics: Nvidia GeForce FX 5200 (updated today!)
SuSE Linux 11.2
KDE 4.3.5
Can't set screen resolution 1024x768 permanently. There is no tools like sax2 which is in openSUSE 11.2. I am to set screen resolution to 1024x768 every time after loggin in.
View 3 Replies View RelatedI just installed Suse 11.3 64bit on a new build. My video card is a nvidia gt240. I am using the default drivers. My monitor is a NEC 17" LCD.
When I boot up the screen resolution defaults to 1280x1024. I can go to applications>configure desktop>display and set it to 1024x768, which is my resolution of choice, and it works until I reboot or log out and log back in, then it resets to 1280x1024.
I would like to make 1024x768 the default so I don't have to keep changing it. Is there a way to do this? The output of xrandr looks like this:
$~> xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DVI-I-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0 +
1152x864 75.0
1024x768 75.1 70.1* 60.0
[Code]...
Is there something I can change to set a new default resolution?
Every time I reboot, my screen resolution goes back to 800x600. Is there a way to permanently set it to what I want?
I'm running OpenSuSE 11.2 using KDE.
I am installing 11.2 on an older machine, Athlon 2800+, GeForce 6800, 1 GB RAM. Install goes fine until try to reboot to the OS and just get massive garbage on the screen. Can't see anything just lines crossing the screen, it seems almost like the resolution is way off but don't know how to change that since I can't see anything. I tried two different install disks to make sure not the problem and got the same thing with both. I tried installing both KDE and GNOME on separate occasions and still same problem. I have used the same install disk to put this on an even older machine and that went fine. I do have windows 7 installed on another partition. I'm fairly new to linux but I'm learning.
View 9 Replies View RelatedSuffering from the expected error in detecting my video properly when installed 11.3.Have intel 915G onboard video. Up until 11.1 Opensuse struggled with loading this correctly. in 11.1 & 11.2 all was well. A couple of minor tweaks in sax2 and it worked perfectly. Now hat sax2 has gone I'm not sure how to make these minor tweaks.
My problem is I have been forced to a screen resolution of 1024X768 VGA Following the readme file adding nomodeset at boot fixes the problem but of course forces me back to an old video driver with pretty poor performance. Is there any way I can change the screen resolution and set the correct monitor - any GUI replacement for sax2? Krandrtray will only let me set a max res of 1024x768. I need to set res to 1280x1024
Opensuse 11.3 with latest updates
KDE desktop
Whatever resolution I choose, 1600x1200 is preferred, it is reset to a default of 1024x768 when I log out. I use the "Configure Desktop" option to set the resolution. I can find no other method to do so. The graphics adapter is an ATI hd3200. I have installed the fglrx driver. I cannot fine the "Control Center" for the driver. How do I make the selected resolution permanent?
I run openSUSE 11.2 on my notebook using VirtualBox 3.0.6_OSE r52128. Recently, I installed the guest additions on my Windows XP guest system (VBoxGuestAdditions_3.0.6.iso).
Before this installation I was able to use a screen resolution of 1024x768 in the guest system. Having installed the guest additions the best result I get is 800x600.
The resolution I'd like to get is 1280x800 which is the default setting of the host system. The graphic device used in my system is an Intel 965 GME/GLE.
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
View 9 Replies View Relatedi installed virtual box one week ago.i downloaded a rpm package named virtualbox-4.0.4-1.2.3.i586.rpm and installed it via yast and i have some problems with it.my problem is i can't make a guest os in currect screen resolution and i can't connect any device(flash drives) in virtual box.
View 8 Replies View RelatedI recently installed 11.2 and am now trying to increase the maximum screen resolution.When I go to 'confifure desktop' > 'display' it will not let me increase the maxiumum screen resolution past 800X600.My nVidia 6150 LE drivers/kernal are installed, so I'm not sure quite what to do.
View 7 Replies View Related