Ubuntu :: Screen Resolution On Aspire One 1366 768
May 28, 2010
i'd like to know if it is possible to up the aspire ones resolution to 1366*768, i've read lots of instances in previous releases of ubuntu, but im using 10.4. I also heard doing it kills the machines performance- is this true?
View 4 Replies
ADVERTISEMENT
Mar 15, 2011
I have installed opensuse 11.4 couple of days ago. Installation went smoothly. Everything is working just fine except the screen resulation. My Monitor supports up to 1366*768. The Display Settings in 11.4 gives option of 1366*768, But whenever I maximize any window (say firefox, opera etc) I can not see the close button & scroll-bar. Here is my xorg file of monitor.
[Code]....
View 9 Replies
View Related
Jun 20, 2011
I am running Ubuntu 10.10 with the NVIDIA Driver 96 on my video card is GeForce4 MX 440. I have brought a new monitor ( View Sonic VA1913w ) but i can not find the right resolution which is 1366 times 768. is there a way i could add it ??
View 9 Replies
View Related
Mar 31, 2011
I've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.
View 5 Replies
View Related
Jan 14, 2011
My Acer AspireOne netbook has a native resolution of 1024x600. Most times I start up, the image is 800x480 against the left edge, black bar on the right side, and a repeated image at the bottom. (I can attach a picture if needed.)I've been seeing this problem since Ubuntu 9.10, but it's more common recently with 10.10. If I keep shutting down and powering back on, eventually it will come up in 1024x600 as I desire. If that happens, then I avoid shutting down and only use Suspend instead. However, anytime I need to reboot (for updates, etc.) the 800x480 comes back.
The Acer logo / BIOS splash screen is also in 800x480, but I only see it switch back to 1024x600 after Ubuntu loads and is shut down. (Repeatedly clicking on/off/on/off never results in the resolution changing to 1024x600.) So, I'm still suspicious that Ubuntu is causing this (no hardware). WinXP used to be on this machine, and the problem was never seen.I don't think any proprietary drivers are needed (but I am still a Ubuntu noob.) When the problem is occurring, I see this result for xrandr:
Code:
swope@netbook:~$ xrandr
Screen 0: minimum 320 x 200, current 800 x 480, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)[code]....
I haven't been able to find xorg.conf ... but I've read that recent versions of Ubuntu create the content dynamically.Not sure what other details I should be including, at the risk of making this post too long.
View 8 Replies
View Related
Jun 12, 2011
I'm working through this issue with my Acer Aspire 5336-2524. Blank screen, can't see anything after reboot.
(Display=Mobile Intel (R) 4 series express chipset family)
Enter;'msinfo32.exe' in the search programs and files box. Open it up after search finds it. You'll then be able to see BIOS version. Go to Acer support and update BIOS if needed. I needed to and so far the result has been that I'm not able to see the install of Ubuntu, butttt,cannot see it after going through all the start up, up to the point where the desktop page should be, then blank screen again.
I'll come back with results.I also am thinking about updating video driver too. (Tried but said it was up to date)Additional (6-14-11@7:36PM) So far by updating BIOS I was able to view ubuntu long enough to install, but couldn't view fully loaded OS (as in couldn't see desktop). As mentioned by foresthill, plugging an external monitor into the laptop allows me to see everything on the external monitor. Ahhh, sweet progress! Waiting for reply from foresthill about exactly what they did in grub for a permanent fix.Additional Two: FYI: Xubuntu 10.10 runs great on the laptop. But no wifi (I cannot remember if I updated and ran across broadcom driver install as 10.04.2 did)
Finial Update: I Installed ubuntu 10.04.2, which had no problems with screen, couldn't use wireless until I update and then a note poped up about broadcom driver which I allowed to install, now I have a fully functional ubuntu. Someone recommended using "LTS" versions for initial install, then go from there if you want to try different versions. I'll wait for the LTS before messing around, just glad to finally get a fully functioning ubuntu!
View 4 Replies
View Related
May 1, 2010
I upgraded my wife's old Acer Aspire 1350 laptop to Lucid Lynx, which works fine, except for the fact that the splash screen both when the OS boots and is shut down is completely garbled and unreadable. The screen is also unreadable when accessing a tty via CTRL+ALT+F2 etc. The GNOME desktop resolution is completely unaffected and is perfectly usable. The splash screen works on MY desktop PC, but it does seem to be using some strange video timings, as my monitor recognises it as 640x480 but doesn't seem able to centre the screen properly. I strongly suspect that this is the cause of problem and my wife's laptop display just does not like the video mode. If I plug my wife's laptop into my monitor, it displays OK.
View 2 Replies
View Related
Apr 29, 2011
Is there a problem with Intel video cards and 11.04? I have tried upgrading and using a live CD and live USB with the same results on this notebook. After upgrading or booting off live CD/USB, I see a black screen, not lit. I can here the login prompt and when I press [Enter] and type my password I hear the Ubuntu theme which means everything is up, but still have a black screen. If I try to go to a console, I am still working with a black screen. Yikes ... I know my Live CD is ok, because it boots fine on my Lenovo S10-3 netbook.
Upgraded from Ubuntu 10.10 32 bit, live CD is 11.04 32 bit. Hardware: Acer Aspire 5732Z with Intel Mobile 4 series chipset integrated graphics controller (rev 09) and 3Gb ram.
View 9 Replies
View Related
May 1, 2010
Before I upgrade to 10.4 It would be nice to find the best solution to this problem. I use a KVM switch that dont pass the EDID info from the screen to the OS. To solve this, that is, to get the correct screen resolution, i need to pass monitor and screen info to the OS at every startup. One way is to ad a script to /etc/gdm/init/default, or in KDE /etc/kde4/kdm/Xsetup.
View 2 Replies
View Related
Jan 23, 2010
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
View 1 Replies
View Related
Mar 11, 2010
I have a Acer Aspire D250 the new ones that comes with the win 7 starter kit.
When I try to install or just even try to load from the live CD from Ubuntu 9.10 or Ubuntu 9.10 remix the logo come up and screen goes black. I'm using a 4gig Sanddisk cruzer and I formated to fat32.
Is it an option that I need to change into the bios? do you think I really need to use a external DVD to install it?
I tried to find a solution on google but can't find anything
View 2 Replies
View Related
Jun 16, 2011
My Aspire's LCD was heavily cracked and I would like to replace it myself. I ordered a new screen in the mail, which just arrived, and pulled up an online guide to replacing the screen. However, it would appear that these guides deal with older models.
All the guides state that the screen can be removed by popping off six rubber things around the edge of the faceplate, revealing the screws underneath. I popped the rubber thingies off to find no screws, but was able to pull the faceplate off except for the bottom, which seems secured to the base by two screws on either side. I cannot get to these screws because they are each covered by two round pieces of plastic which are level with the faceplate.
I will take it to a computer repair place if necessary, but I would really like to try to get this done myself first.
Has anyone had success with removing the faceplate of a later model Aspire One? My exact model is D255E-13111
View 3 Replies
View Related
Aug 27, 2011
I recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
View 2 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
Jun 15, 2010
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies
View Related
Jun 10, 2010
Last weekend I installed Ubuntu 10.4 (Netbook remix) on my new Acer Aspire 751h. The installation seemed to go smoothly, but I've noticed several things that don't work as well as on my old AA 110. I should say that I installed Ubuntu in a dual-boot setup with Windows XP, which the machine already had installed. Firstly, the screen brightness can't be adjusted with the function key/hotkey combination. The sound volume hotkeys work fine, and the brightness hotkeys work with XP, so it's not a hardware issue. The default brightness is pretty dim, so this is an annoying problem. Is there a way to bind the hotkeys to the 'increase/decrease brightness' functions?
Secondly, the vertical scroll bar on the desktop doesn't work, by which I mean if I click above or below the highlighted area no scrolling takes place. However, I can drag the highlighted area up or down and scrolling does take place, and scrolling via the touchpad works. All forms of scrolling work normally within applications. Is there anything I can do to fix this? It's only a mild annoyance, though. Thirdly, in the power management preferences application I don't have an 'On Battery Power' tab - just 'On Mains Power' and 'General'. There are some other peculiarities that probably follow on from this. I have a power indicator in the top panel of the desktop, but on bootup it's a 'lightning bolt' icon rather than the battery-shaped icon it should be. If I plug into mains power, it changes to a battery-shaped 'charging' icon until it's fully-charged, when it changes back to the lightning bolt. If I then unplug the mains power, I get a battery-shaped 'discharging' icon, but this doesn't survive a restart. Obviously, a battery level indicator is very useful and I'd like to get it working properly. The help file for power management preferences says something about GConf policy keys that need to be made writable in order to display some sliders and option boxes. I certainly don't have as many sliders and options as shown in the help file. I guess this might be related to the screen brightness problem.
Finally (for now - I haven't explored everything yet) the screen ratio looks wrong. Circular icons appear as ovals. It looks like the software thinks I've got a 4:3 ratio whereas really it's widescreen. I can't see where I can change this. I've looked in 'System.. Preferences. Monitors' but there's nothing I can change there. System testing shows the apparent resolution at 1024x768, whereas the hardware spec is 1366x768. I'm wondering whether to try to fix these things individually or whether a better option might be a reinstall - perhaps without the XP dual boot. What do you think? I'm willing to change settings from the terminal but I'd need to be told exactly where to go and what to do.
View 2 Replies
View Related
Apr 28, 2011
This fixed a black screen issue and a brightness adjustment issue after installation of ubuntu. Also on 11.04 I couldn't get Unity to work until I edited grub I didn't come up with the fix but it took me forever to find a solution so I figured I would post it. If I have did something wrong just get a mod to delete or move this. I don't use forums often.
Code:
sudo gedit /etc/default/grub
Edit two lines to read as follows:
[code]....
View 8 Replies
View Related
Aug 25, 2010
i just installed 10.04.1 and have done a quick apt-get update/apt-get upgrade.the problem is i'm running a 1920 x 1080 display using a geforce gtx460, yet the screen is cropped in at 1280 x 1024. i have the option to go lower only.i first tried to install the nvidia binary in the old-fashioned way of (system > administration > hardware drivers) but this reported that there are no proprietary drivers in use and there was no option to 'switch one on'.i guess my hardware is too new so i want to install the drivers available at nvidia's website (256.44). this adds support for my gpu.
i tried to install these by exiting x but this just resulted in some sort of system hang. the function keys on my keyboard seem to be 'non-functional' too, making a ctrl+alt+f1 not do what it should. i think this may be a problem with the mac keyboard i'm using.is this just a waiting game? can i get into a virtual console somehow else (perhaps during bootup)? is there a way i can exit x without the system hang? is there another way of installing some workable drivers? should i be altering my xorg.conf?
View 4 Replies
View Related
Oct 18, 2010
I have a custom PC with a (nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)) graphics card and a 17" Compaq MV720 CRT monitor. My graphics card/monitor combination is capable of resolutions up to 1280 X 1024.
I just installed Ubuntu 10.10 64Bit, and the highest resolution available at Sysytem>Preferences>Monitors>Resolution: is 1024 X 768. I want to get the resolution up to 1152 X 864, which the card/monitor is capable of. I looked around the forum for a solution, but couldn't find a thread that explains exactly what I want to do. In the most previous version of Ubuntu that I used (9.10), I could generate an xorg.conf with Xorg, grab the (Monitor, Device, and Screen) sections, and use that with a few changes to create an xorg.conf to get the resolutions that I wanted. In 10.10, that no longer works. In fact, it won't even work without the changes. After placing the xorg.conf in /etc/X11, the PC will only boot up to a text CLI prompt to login. No GUI desktop.
My PC is a totally orthodox desktop, no dual boot, no Virtualbox. What do I have to do to get the resolutions above 1024 X 768?
View 4 Replies
View Related
Mar 9, 2011
I've installed Ubuntu 10.10 on my laptop, only to find I only have low resolution problem. I got my system info and it's:
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
All the tutorials tell me to try and use xorg, with commands like:
Edit /etc/X11/xorg.conf but I always get a response of
Command 'edit' from package 'mime-support' (main)
Edit: command not found
View 3 Replies
View Related
Nov 22, 2010
I have installed ubuntu 10.10 yesterday, but couldnt find any option to set screen resolution , from where to set it ?
View 4 Replies
View Related
Apr 2, 2010
I'm having problems adjusting my screen resolution. I'm using Nvidia Geforce FX5300 video card and Samsung T220P LCD screen with resolution of 1920x1200. After installing the Nvidia driver I went to system -> preferences -> display in order to change the resolution to 1920x1200. Unfortunately, the available resolutions were only 640x480 and 320x240. I tried to set the resolution manually, using the advanced button, but when I did this everything was extremely big on my screen.
View 1 Replies
View Related
Apr 13, 2010
I am running Ubuntu 9.10 on Intel(R) Celeron(R) CPU 570 @ 2.26GHz SIS 771/671 PCIE VGA
have even tried changing xorg.conf
View 1 Replies
View Related
May 14, 2010
How can I change screen resolution?
View 4 Replies
View Related
Jun 15, 2010
By default, ubuntu is using an incompatible resolution for my monitor. It happens while booting and logging in. It is due to it using a Hz setting to high for the monitor.What can I do to fix this?
View 1 Replies
View Related
Jun 20, 2010
Yesterday I installed ubuntu 10.04 LTS, it allow me only 800x600, 640x480 and 400x300 screen resolution, how can i set 1280x1024 ?
View 9 Replies
View Related
Aug 10, 2010
I'm very new to Ubuntu and have 9.04 running on a Sony Vaio, don't know what graphics card I have. My screen resolution doesn't have an option higher than 800x600, so everything looks super zoomed in. Other threads tell me to edit xorg.conf, which I did (probably incorrectly). The result was the computer had mega problems when I restarted it, and when it finally got back to the desktop it didn't give me any other options for screen resolution. Also it says I'm in low graphics mode.
View 1 Replies
View Related
Oct 28, 2010
On last boot it was fine but now it is showing 800X600 which is too low . How to adjust it
View 9 Replies
View Related
Dec 14, 2010
I just want my normal settings back. I deleted the original post because I really screwed something up and I have to use Windows until I can figure out how to fix it. Forget about my resolution preferences. My Linux boot is stuck in low-graphics mode
Would anyone be able to provide me step by step, easy to follow for a newb instructions on fixing my boot?
I have to use recovery mode to load any graphics at all, and it's stuck in low graphics mode and I can't change it. More info below.
View 5 Replies
View Related