Unusual problem here -I'm posting in hardware as I'm not certain where it fits.Home laptop (mainly wife's in use) upgraded from 11.3x86 last week to 11.4x64, pretty much everything is awesome.However, when she attempts to print a PDF with multiple pages per sheet (study notes),
View 3 RepliesI have a large image that I want to print over 4 pages, each page showing 1/4 of the overall image, that I will past together. I'm doing this from GIMP on an up-to-date fc12 system. Searching around I find that there is a "scale" field in the print dialog and the lp command that cups supports and according to the documentation if I set scale to "200%" it should do what I want.However, when I set scale to 200% I get only one page with the upper left 1/4 of the page and then nothing. How do I get it to print the remaining 3 pages?
View 1 Replies View RelatedDon't know where this should go, so I put it here for starters! I want to print documents on both sides of an A4 sheet, using a Brother HL-1230 printer. Is there a way of getting the odd numbered pages out first (then a pause?) and the even numbered pages after? To do this manually is tedious on a long (14 page) doc. Way back in the days of that other op. sys. I had a program (WordPerfect?) Whose printer driver would do this. Is there one for Ubuntu?
View 1 Replies View RelatedI'm looking for an easy solution (1 click install) to scan multiple pages to one pdf file on openSUSE 11.2 with gnome.Most tools only support 1 page tobe scanned to pdf.gscan2pdf looks like a solution but I can't get it running on 11.2.(missing dependencies e.g. perl-forks)
View 9 Replies View RelatedI was wondering how you might go about printing multiple images on a single sheet of paper...I used to know how to do it in Windows but have never done it in Ubuntu.
View 1 Replies View RelatedRunning openSuse 11.3 32 bit clean default install with a HP 2575xi connected via USB. Sometimes, printing fails halfway through the last page. The following shows in the CUPS error log file:
Code:
D [03/Sep/2010:17:15:15 -0400] [Job 30] Process 21943 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=2..."
[code]....
I am trying enter a VLOOKUP formula in Sheet1, where the array is in Sheet2. For both the items, I have used mouse to enter cell references, which I always do.
1. Search criterion has been entered as a range, which is different from previous versions and not a very comfortable situation.
2. array reference completely missed entering Sheet2! in front of A1:C13. Only way out of this is manually entering the sheet name, which is not only cumbersome but also ludicrous. Moreover, we never had to do it like this in the past. I am using OpenOffice.org 3.2.1 in Ubuntu 10.10.
Thought I'd post this as I couldn't find much about it online. I have an HP3745 and am running Ubuntu 10.04. For some reason I couldn't get anything from the black ink cartridge in test mode or for real. The printer would go through the motions but would return a blank page. Turns out it was because my COLOUR ink cartridge was empty!! Solution was simply to select print in grayscale. Also I find with this particular printer HPCUPS works better than HPLIP.
View 1 Replies View RelatedI am having problems in printing 'complex' PDF files. Simple pages are no problem. Good examples is Royal Mail postage printing. Generated PDF displays correctly - and in Ubuntu 10.10 printed perfectly. Since I upgraded to 11.04 I get a blank page. No matter what I do. I have tried everything suggested when I googled the problem - but no solution works. I am printing across the network through my NAS box (no changes to that at all) to an HP Laserjet 1010. It all works correctly and as expected under Windows - so the setup is fine with printer and NAS. its a problem introduced by 11.04.
View 3 Replies View RelatedInherited an old Laserjet 6P that was working fine XP. No matter which printer driver I use all I get are pages and pages of garbage during the test print. I have tried the hplip, gimp, ljet4 drivers without success. I have tried sending text files from the command line as well (cat /etc/passwd > /dev/lp0) with the same result.
Fedora 11 64
cups 1.4
hplip-3.9
hpijs-3.9
Anyone using this printer with cups 1.4? Any ideas which driver to use?
I have a postscript printer. Whenever I request that Emacs print a man page it returns with a list of characters that it cannot print. Is there anyway to remedy this situation?
View 9 Replies View RelatedIm unable to print pdfs. the printer only gives me a blank page. what do i need so it can print? I tried going to "advanced" and checking "print as image" but it does not work. Printer still gives me a blank page.
I have an HP printer Photosmart C6100 series.
I installed Xubuntu and was thrilled to see that it had already setup my Brother HL-2140 USB laser printer.However, there is something seriously wrong with the setup. When you try and print, even a test page - it just churns through the entire paper tray printing nothing. Also, when you restart the computer it tries to print the jobs again. I went to Printing and selected the printer but could not find where you could see the print job queue. I did see it during troubleshooting and was able to delete the jobs on the troubleshooting screen.
View 3 Replies View RelatedI would often like to print out information from a page on a website. I don't want all the rest of it - the pages before and after.
The trouble is that the websites page numbering, when it is available, doesn't often conform to my printer and the size of the page on the screen. So I guess at,say,page 6 and get something like page 3 if I printed it all out.
This printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.
Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm
I have dualboot between Windows XP and Ubuntu 9.04. I have HP deskjet prineter, model=D1560. Ubuntu installed the printer automatically. The problem is that when I print any page in Ubuntu, the printer does not print anything and eject the page blank. But Windows XP is printing finely.
View 1 Replies View RelatedI upgraded from 13.0 to 13.1 and now I have strange behaviors with the printer. It is an Epson Stylus Photo RX640. It was working well with the vanilla Gutenprint 5.2.2 that came in Slack 13.0. The printer is shared and used from other slackware boxes and a mac. Upgrade to 13.1 (gutenprint gets to be 5.2.4) ...
Now when I print from the machine that has the printer attached I get full black pages, and cups shows errors. The Mac is still able to print well (probably because it is using its own PPD and passing through directly to the printer). I then removed gutenprint, and then removed the 5.2.2 PPDs (that were still in the system). Reinstalled gutenprint from the Slackware 13.1 distro. And the problem persists.
[Code]....
I have 2 servers that are mirrored. They host 3 separate websites. Two of these websites are regular HTTP and the other is HTTPS with Digest authentication as well. The reason there are 2 servers is because one is a primary and the other secondary in case the primary goes down. Recently I decided to upgrade the secondary server then make it the primary server. I have done most of the configuration and the sites using regular HTTP are working perfectly fine. The page using SSL is not. Apache fails to load and here are the errors I am receiving the the error log file:
Code:
[Fri Aug 13 09:27:00 2010] [warn] RSA server certificate CommonName (CN) `newserver.domain.com' does NOT match server name!?
[Fri Aug 13 09:27:00 2010] [error] Unable to configure RSA server private key
[Fri Aug 13 09:27:00 2010] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
For the first warning, I cannot find anywhere that says the CN "newserver.domain.com", only what the CN is in the SSL key. I have no idea where to even start with the other errors.
Are there any reliable ways to print libreoffice or openoffice drawings to multiple pages. I have two drawings I designed for 11" x 22" sheets, and I'd like to print one of them to 4x or at most 6x 8 1/2" x 11" sheets, without reduction.
So far, when I've tried this using "print to multiple sheets," the results have been erratic, and have basically wasted paper and ink with no usable results.
I can't even preview this.
I am using the old trick of creating a duplicate file, and creating for duplicate slides within it, making each slide one group, and using the alignment settings to make each slide match one corner of the original image. It works, but it is kinda clunky.
Notwithstanding that I might not want to do this because of the large file size, how would I scan a multi-page document into one image file (probably a jpeg)? The only way I know how is to, after making seperate jpegs of every page, manually pasting the images below each other in a photo editor, which of course is a lot of trouble.
View 10 Replies View RelatedIs there any scanner that can scan multiple pages at a time? Without human intervention. Then put all the scanned pages in 1 tiff file or multiple gif or png or jpg files. A scanner that works with Linux. I need make and model.
View 1 Replies View RelatedI've got a bunch of PDF files that have been produced two "real" pages to a single PDF page; I'd like to chop these in half and put each half on a separate page. Essentially, I need something thatdoes the exact opposite of pdfnup (or psnup). Google and apt-cache search are giving me no love.Platform is Linux, open source preferred; as I've got a great pile of these to do something that can be scripted (as opposed to a GUI) would be nice, so I can just give it a list of them and have it chew away.A pre-existing script isn't the only option, either; if there's sample code to manipulate PDFs in similar ways with a third-party library, I can probably hack it into doing what I want.
View 3 Replies View RelatedSystem : Debian squeeze, Gnome, amd64Printer : Samsung ML-1640 SeriesDriver:Samsung ML-1640, SpliX V. 2.0.0Printer works, but printing a pdf file from evince fails ( nothing is printed )...http://localhost:631/jobs/ shows : "/usr/lib/cups/filter/pdftoraster failed
View 12 Replies View Relatedrecently i have upgraded my centos 5.0 or 5.1 installation using 'yum upgrade' to centos 5.4 since the upgrade I am unable to print any PDF files as landscape, they get printed but do not seem to be rotated and are aligned a little bit less than when using portrait (test using the GUI and LP)
when printing a text file in portrait and landscape everything goes well tested on labelprinter Brother QL-580N and tested on Samsung SCX-5530FN Laserprinter both using the network I already tried 'yum downgrade cups' this works but with no success
How do I print 4 pictures to a page. I can't figure out what to use to do this. It's very annoying to have to use 8 sheets of paper when I could use but one
View 5 Replies View RelatedI can't print via our network printer (HP DeskJet 3650) which is connected to a WinXP PC on the network. My laptop is wireless connected to the network. My distribution is openSUSE 11.2 and I tried setting up the network printer via CUPS:
Went to http://localhost:631
Add Printer
Device: Windows Printing via SAMBA
Device URI: smb://UMBRELLA/SMOKE/HP3600
Make: HP
Model: HP DeskJet 3650, hpcups 3.9.8 (en)
Printer State: idle, accepting jobs, published.
Then clicked the "Print Test Page" button. At this point the printer actually starts making sounds.. the same sounds it makes when it's preparing to print something. But then, it stops. The printing job is still present in the printer queue at the WinXP PC, but it won't print.
So I looked at this documentation: [URL]
Step 2 from this documentation tells me to install a PPD file.. which I can't find anywhere. It's not on the original HP driver CD, neither can it be downloaded from this page: http://www.openprinting.org/show_pri...P-DeskJet_3650.
Also, I believe I have everything installed:
Code:
serrano@saibot:/usr/share/cups/model/HP> rpm -qa hplip hplip-hpijs foomatic-filters
hplip-hpijs-3.9.8-3.4.1.i586
foomatic-filters-4.0.1-2.1.i586
hplip-3.9.8-3.4.1.i586
I have a Konica 2530DL colour laser and have used it with versions from 6.06 onwards.
However now, with 10.10 I find I cannot print at from most apps eg OpenOffice or PDFs. I get errors on video frame showing on the printer but nothing obvious on the PC.
Test print and gedit text prints works fine and so does using a VM with Lucid running on the same host prints fine too from anything.
Can't see any other comments about this problem anywhere but I know the printer is fairly common and has worked well with Linux in the past.
Using it with IP printing on port 9100 and allow the installation to detect and select the driver. Not setup anything clever and I have the same issue with a Lucid upgrade to 10.10 or a clean install. However the VM running Lucid prints fine. Must be something changed on Maverick somewhere.
Apologies if this was asked before -- I have googled the last bytes out of my Firefox but fail to find anything helpful. Here's my problem:I have a foomatic hpijs cups-driver for a HP Inkjet (Non-PS printer) installed. Printing from UNIX-hosts works. I have cups configured not to allow raw-printing (/etc/cups/mime.types: #application/octet-stream, /etc/cups/mime.convs: #application/octet-stream).I have now installed samba-printing, the cups PS-drivers plus the Windows PS-drivers are populated to /etc/samba/drivers/W32X86/ and get pushed to the WIN-Client.Problem is that when I print from a WINXP client, the printer outputs heaps of Postscript-text instead of my page.I have tried to debug this a bit but fail to find anything really useful. My observations so far:
- The samba-pushed HP_Photosmart_3300.ppd (in both /etc/samba/drivers/... and in the resulting dir on the WINXP client) reads:
*cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
[code]....
I've been looking though different editors for one that has good printing support. Ideally it should be able to print C++ code with line numbers, syntax highlighting, multiple columns per page, customizable fonts and sizes and a print preview feature so that I can make sure it looks right before sending it to the printer. It appears that notepad++ had at least some of these features, but it is not available on linux. The best I could do so far is to copy/paste the output of 'cat -n foo.cpp' into oowriter and format it into two colums. I don't get synax highlighting though and I have to manually replace tabs with a few spaces as well as some excessive leading spaces before the line numbering.
View 1 Replies View RelatedHow can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.
I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.