Software :: Accurately Printing Out Individual Pages From The Internet?
May 28, 2010
I would often like to print out information from a page on a website. I don't want all the rest of it - the pages before and after.
The trouble is that the websites page numbering, when it is available, doesn't often conform to my printer and the size of the page on the screen. So I guess at,say,page 6 and get something like page 3 if I printed it all out.
View 4 Replies
ADVERTISEMENT
Oct 9, 2010
I have a database (Mysql) with records of our club members. It is quite small only about 300 records. Unfortunately there are gaps in the information and I would like to be able to print out (two records to an A4 sheet) the records in form format so that I can pass these to the members who will fill in any blanks in the record.
If it is not possible to do what I want from the database I can convert the records to a spreadsheet and do it from there.
View 1 Replies
View Related
Apr 24, 2011
Thought I'd post this as I couldn't find much about it online. I have an HP3745 and am running Ubuntu 10.04. For some reason I couldn't get anything from the black ink cartridge in test mode or for real. The printer would go through the motions but would return a blank page. Turns out it was because my COLOUR ink cartridge was empty!! Solution was simply to select print in grayscale. Also I find with this particular printer HPCUPS works better than HPLIP.
View 1 Replies
View Related
May 29, 2011
I am having problems in printing 'complex' PDF files. Simple pages are no problem. Good examples is Royal Mail postage printing. Generated PDF displays correctly - and in Ubuntu 10.10 printed perfectly. Since I upgraded to 11.04 I get a blank page. No matter what I do. I have tried everything suggested when I googled the problem - but no solution works. I am printing across the network through my NAS box (no changes to that at all) to an HP Laserjet 1010. It all works correctly and as expected under Windows - so the setup is fine with printer and NAS. its a problem introduced by 11.04.
View 3 Replies
View Related
Nov 2, 2009
Inherited an old Laserjet 6P that was working fine XP. No matter which printer driver I use all I get are pages and pages of garbage during the test print. I have tried the hplip, gimp, ljet4 drivers without success. I have tried sending text files from the command line as well (cat /etc/passwd > /dev/lp0) with the same result.
Fedora 11 64
cups 1.4
hplip-3.9
hpijs-3.9
Anyone using this printer with cups 1.4? Any ideas which driver to use?
View 4 Replies
View Related
Mar 23, 2011
I have a postscript printer. Whenever I request that Emacs print a man page it returns with a list of characters that it cannot print. Is there anyway to remedy this situation?
View 9 Replies
View Related
Jun 1, 2011
Im unable to print pdfs. the printer only gives me a blank page. what do i need so it can print? I tried going to "advanced" and checking "print as image" but it does not work. Printer still gives me a blank page.
I have an HP printer Photosmart C6100 series.
View 6 Replies
View Related
Jun 25, 2011
I installed Xubuntu and was thrilled to see that it had already setup my Brother HL-2140 USB laser printer.However, there is something seriously wrong with the setup. When you try and print, even a test page - it just churns through the entire paper tray printing nothing. Also, when you restart the computer it tries to print the jobs again. I went to Printing and selected the printer but could not find where you could see the print job queue. I did see it during troubleshooting and was able to delete the jobs on the troubleshooting screen.
View 3 Replies
View Related
Dec 8, 2009
I have a large image that I want to print over 4 pages, each page showing 1/4 of the overall image, that I will past together. I'm doing this from GIMP on an up-to-date fc12 system. Searching around I find that there is a "scale" field in the print dialog and the lp command that cups supports and according to the documentation if I set scale to "200%" it should do what I want.However, when I set scale to 200% I get only one page with the upper left 1/4 of the page and then nothing. How do I get it to print the remaining 3 pages?
View 1 Replies
View Related
May 30, 2011
This printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.
Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm
View 14 Replies
View Related
Mar 28, 2011
Unusual problem here -I'm posting in hardware as I'm not certain where it fits.Home laptop (mainly wife's in use) upgraded from 11.3x86 last week to 11.4x64, pretty much everything is awesome.However, when she attempts to print a PDF with multiple pages per sheet (study notes),
View 3 Replies
View Related
Mar 16, 2010
I have dualboot between Windows XP and Ubuntu 9.04. I have HP deskjet prineter, model=D1560. Ubuntu installed the printer automatically. The problem is that when I print any page in Ubuntu, the printer does not print anything and eject the page blank. But Windows XP is printing finely.
View 1 Replies
View Related
Jun 24, 2010
I upgraded from 13.0 to 13.1 and now I have strange behaviors with the printer. It is an Epson Stylus Photo RX640. It was working well with the vanilla Gutenprint 5.2.2 that came in Slack 13.0. The printer is shared and used from other slackware boxes and a mac. Upgrade to 13.1 (gutenprint gets to be 5.2.4) ...
Now when I print from the machine that has the printer attached I get full black pages, and cups shows errors. The Mac is still able to print well (probably because it is using its own PPD and passing through directly to the printer). I then removed gutenprint, and then removed the 5.2.2 PPDs (that were still in the system). Reinstalled gutenprint from the Slackware 13.1 distro. And the problem persists.
[Code]....
View 2 Replies
View Related
May 18, 2010
What is the quickest and the most elegant way to implement the following scheme:On my computer I have two browsers and two internet channels:
1. Ethernet cable internet
2. USB 3g modem/.
When I execute the first browser it uses only the cable internet and the second one uses the USB modem.
View 2 Replies
View Related
Apr 9, 2011
Since I enjoyed Gnome shell with Ubuntu 9.10 (but Ubuntu runs too slow on this computer for my druthers), I thought it would be fun to check out gnome shell on 11.3. I thought that since my 11.3 has gnome 2.30, that the gnome shell in the software manager would be a concomitant version, so I installed it. I then followed the directions given in the second posting of Enabling Gnome Shell in 11.3?
When I logged back in, I selected Gnome 3 Preview [even though I hadn't thought that that was what I'd installed -- (has openSUSE retired all older versions of Gnome shell?)]. The desktop won't boot (I don't know what the correct way of saying it is). The splash shows, but the icons just intermittently flash off and on at random intervals, never quite making it all the way "on." When I right click the bottom of the screen, I can select "terminal" (when I can accurately coordinate my double-click with the random, intermittent flashing), but then the terminal also does the random, intermittent flashing as well. So I can never get anything typed in. When I reboot, there's no login box.
View 5 Replies
View Related
Jun 18, 2010
Some pages on the Internet will not load. What is the remedy?
View 1 Replies
View Related
Nov 22, 2010
Freshly installed Ubuntu 10.10 amd64 on Asus K50IN laptop refuses to show secure HTTPS internet pages, while posting this here is OKay. It says connection timed out. I tried several browsers FireFox Arora Epiphany.
View 2 Replies
View Related
Oct 24, 2010
I am able to print from Open Office just fine, but if I attempt to print a PDF or if I attempt to print directly from the internet, I get nothing!So instead I have to open the openoffice and copy the internet stuff to a page in there so it will print.Do any of you have an idea of what can be the cause.I am a linux noobie, so I may be the problem, however it is frustrating putting PDF's on flash drive and getting my son to bring his windoze laptop in so that I can print my PDF.
View 2 Replies
View Related
Oct 20, 2010
I just installed a fresh copy of Ubuntu 10.10 on a HP DV2500 laptop. Everything installed as expected but I am having some wireless issues I was hoping somebody could assist me with. I am able to connect to my network via wireless with no issues. However, when I attempt to browse the internet it will not connect to any pages. Obviously when I connect it via CAT 5 all works as expected. Any ideas on how to solve my wireless issues?
View 1 Replies
View Related
May 7, 2010
I have linux firefox installed on my notebook, and after having a bit of a problem with it, I did a full factory reset back to all the original settings. Now when I connect to the internet, some of the pages now are not displayed properly. For instance, when visiting E-bay, the listings look fine, but my E-bay page is all listed down the page, (if that makes sense) and I cannot look at any of the photos. MSN is also, how can I put this, spread out across the page. I have done a live update to see if that makes a difference, but no joy.
View 9 Replies
View Related
May 31, 2011
I recently bought my laptop (Fujitsu nh540) and installed FC14 on it. I have Integrated WLAN Atheros HB97 (IEEE 802.11b/g/n) (more info here about the config) running on: 2.6.35.13-91.fc14.i686.PAE
Since I installed FC I've had problems with the internet. In any browser pages load very slow, it looks like the browser waits some seconds, sometimes even 1-2 minutes until it actually starts to load the page.
Second thing I saw is that when it boots I keep getting:
Determining IP information for eth0... failed; no link present. Check cable? [FAILED]
But I have WiFi internet. I am not using a wired internet connection.
I installed madwifi driver (compiled it, after reading some info on google and it seems it should be good for my network) and it seems it's a bit better, but I still have to wait some seconds until it starts loading pages. I tried different browsers, it makes no difference. On my other 2 laptops I have no problems, the internet works fine, same goes for my android mobile phone. Another "nice" problem I noticed is that when compiz is enabled I see incoming video on skype black and the same black screen for some movies with some programs. After disablig compiz, all works for video.
View 1 Replies
View Related
Nov 9, 2010
I can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
View 1 Replies
View Related
Jun 10, 2011
Is it possible to to print to a printer on a netport express 10/100 over the internet ?
I have printing working from all computers on the same internal network as the netport express.
But I have two phone lines with two routers / ISP's
And I would like the computers on the other network to be able to print the the first networks printer.
View 2 Replies
View Related
Feb 19, 2010
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies
View Related
Sep 9, 2009
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies
View Related
Dec 30, 2009
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies
View Related
Dec 28, 2010
I have been able (with some hair pulling and gnashing of teeth) to print from outside the LAN to the printer connected via USB to the desktop computer at home, until the last upgrade. The laptop will forst say the printer may not be connected, but eventually (usually) after a while says the job was sent to the printer. The log files on the desktop - serving as the printer server have an error message in cups/error_log that I am not familiar with, and don't believe I have seen before. I am sure if I could decipher that error and figure out how to change the behavior to get rid of it, it would once again work. Printing from within the LAN is a no-brainer as it has been for the last several releases. The error that I get when trying to print outside the LAN (via the internet) is:
cupsdAcceptClient: 12 from <WAN IP>:631 (IPv4) Unable to encrypt connection from <WAN IP> - GnuTLS internal error. I am missing something as far as authentication from the laptop to the desktop. how to fix it.
View 1 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
May 14, 2010
I'm very new to Linux, and I have ran a Windows XP server before, with a Apache2 Server software for Windows. and didn't have any problems with it, but I really want to set this server up with Linux.
The server is running, but the only thing that comes up in the browser, is the html pages, the pages call all the images from a folder /images/ but for some reason I can't get it to pull the folder up. None of the graphics show on any of the pages.
I also have a VirtualHost setup, and have another website set up in the DocumentRoot with the 2nd site, but it won't come up ether, even tho it is listed as the 2nd VirtualHost, and have that folder set up as the DocumentRoot.
I'm just using IP Addresses for now till I get this all sorted out.So if I enter the IP the main page comes up, just no graphics. if I enter the IP Address/2ndSiteFolder/ I get a directory listing with the 2nd site folder listed, so now if I click on the 2ndSiteFolderName, it comes up as IP/2ndSiteFolder/2ndSiteFolder/ Now the 2nd site comes up, and so does all the Graphics for that site, even if I go to some of the other subfolders site. So its just weird. I don't know what I need to do to get this to work right.
I know it has to do with setting up the folders for VirtualHost, I just don't know what it is. I have been working on this for a week, and I'm not getting anywhere..
View 9 Replies
View Related