Hardware :: Printing Via Network Using The HP DeskJet 3650 Fails?
Jan 8, 2010
I can't print via our network printer (HP DeskJet 3650) which is connected to a WinXP PC on the network. My laptop is wireless connected to the network. My distribution is openSUSE 11.2 and I tried setting up the network printer via CUPS:
Went to http://localhost:631
Add Printer
Device: Windows Printing via SAMBA
Device URI: smb://UMBRELLA/SMOKE/HP3600
Make: HP
Model: HP DeskJet 3650, hpcups 3.9.8 (en)
Printer State: idle, accepting jobs, published.
Then clicked the "Print Test Page" button. At this point the printer actually starts making sounds.. the same sounds it makes when it's preparing to print something. But then, it stops. The printing job is still present in the printer queue at the WinXP PC, but it won't print.
So I looked at this documentation: [URL]
Step 2 from this documentation tells me to install a PPD file.. which I can't find anywhere. It's not on the original HP driver CD, neither can it be downloaded from this page: http://www.openprinting.org/show_pri...P-DeskJet_3650.
I updated to the recent 9.10 version of Ubuntu and found that my printer no longer works. When trying to print, the printer just blinks and *occasionally* makes a noise and prints out a partial line of text or whatever. It's a USB connecting HP Deskjet D1420 that is not a network printer and does not need to be networked.
I'm using a HP Deskjet F380 multifunction printer on a ubuntu 9.1 machine. It recognises it as an F300 series printer and so far it prints and scans very well. The problem is that I usually print 2 pages per sheet and double side on windows but I cannot do it on linux (in this case the option of printing odd pages first and even pages second is useless). I see there is an option in your printer preferences to print double side but it doesn't work.
I recently installed 10.04 and the printer was working for a while. Now when I print something the print que icon shows up and goes out like it has printed but nothing prints. I ran the troubleshooter and got this.
Suddenly, my printer has stopped printing in black. Either I get a smudge on the paper, or the warning light comes on and it stops working completely.
hp-levels reports the black cartridge as 82% full and in good health hp-info says "there is a problem with a print cartridge" hp-clean either doesn't help or doesn't run
I've tried wiping the print head (the ink's coming out OK) and polishing the cartridge connection.
I just installed my HP DeskJet 1220C printer on my CentOS 5.2 server, and it's working apart from one GIANT issue: It only prints from my Windows machines via its Samba share. It won't print from any of my Linux machines, not even the machine itself. I seem to be stumped here, I cannot find a reason why its doing this.
Running openSuse 11.3 32 bit clean default install with a HP 2575xi connected via USB. Sometimes, printing fails halfway through the last page. The following shows in the CUPS error log file:
Code: D [03/Sep/2010:17:15:15 -0400] [Job 30] Process 21943 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=2..."
System : Debian squeeze, Gnome, amd64Printer : Samsung ML-1640 SeriesDriver:Samsung ML-1640, SpliX V. 2.0.0Printer works, but printing a pdf file from evince fails ( nothing is printed )...http://localhost:631/jobs/ shows : "/usr/lib/cups/filter/pdftoraster failed
recently i have upgraded my centos 5.0 or 5.1 installation using 'yum upgrade' to centos 5.4 since the upgrade I am unable to print any PDF files as landscape, they get printed but do not seem to be rotated and are aligned a little bit less than when using portrait (test using the GUI and LP)
when printing a text file in portrait and landscape everything goes well tested on labelprinter Brother QL-580N and tested on Samsung SCX-5530FN Laserprinter both using the network I already tried 'yum downgrade cups' this works but with no success
Unusual problem here -I'm posting in hardware as I'm not certain where it fits.Home laptop (mainly wife's in use) upgraded from 11.3x86 last week to 11.4x64, pretty much everything is awesome.However, when she attempts to print a PDF with multiple pages per sheet (study notes),
I have a Konica 2530DL colour laser and have used it with versions from 6.06 onwards.
However now, with 10.10 I find I cannot print at from most apps eg OpenOffice or PDFs. I get errors on video frame showing on the printer but nothing obvious on the PC.
Test print and gedit text prints works fine and so does using a VM with Lucid running on the same host prints fine too from anything.
Can't see any other comments about this problem anywhere but I know the printer is fairly common and has worked well with Linux in the past.
Using it with IP printing on port 9100 and allow the installation to detect and select the driver. Not setup anything clever and I have the same issue with a Lucid upgrade to 10.10 or a clean install. However the VM running Lucid prints fine. Must be something changed on Maverick somewhere.
Apologies if this was asked before -- I have googled the last bytes out of my Firefox but fail to find anything helpful. Here's my problem:I have a foomatic hpijs cups-driver for a HP Inkjet (Non-PS printer) installed. Printing from UNIX-hosts works. I have cups configured not to allow raw-printing (/etc/cups/mime.types: #application/octet-stream, /etc/cups/mime.convs: #application/octet-stream).I have now installed samba-printing, the cups PS-drivers plus the Windows PS-drivers are populated to /etc/samba/drivers/W32X86/ and get pushed to the WIN-Client.Problem is that when I print from a WINXP client, the printer outputs heaps of Postscript-text instead of my page.I have tried to debug this a bit but fail to find anything really useful. My observations so far:
- The samba-pushed HP_Photosmart_3300.ppd (in both /etc/samba/drivers/... and in the resulting dir on the WINXP client) reads: *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
I have an older version of ggv on RHEL for viewing PostScript (.ps) files, but the binary I have refuses to open files from AFS. ggv-2.12.0 is able to open these files from AFS just fine on my Mac. I was not able to find packaged binaries for RHEL 5 or 6 for ggv-2.12.0, so I downloaded the source and compiled it. Unfortunately, it fails to start, printing these error messages:
[code]...
Does anyone know the fix? Or alternatively, is there another good and well-maintained PostScript viewer for Linux?
I am trying to get network printing using IPP working, as per tutorial by Swerdna Linux Printer Sharing: Suse/openSUSE 10.x 11.x IPP Print Server for Linux & Windows Clients I used to have it working fine using openSUSE 11.1, then I upgraded to 11.4 and haven't been able to get it working since.
I can ping the server ok (ping 192.168.1.30) but cannot connect from web browser to [URL] it says "The server at 192.168.1.30 is taking too long to respond." This is the same from any workstation, Windows or Linux. The printer works fine locally on the server box. I noticed that Swerdna's tutorial (which I used successfully to setup this on 11.1) hasn't been updated for 11.2 upwards, I noticed that a couple of files that needed to be changed previously I don't even have in my current 11.4 version, ie /etc/cups/mime.convs and /etc/cups/mime.types. I'm wondering if these are replaced by something else now, and if that has any bearing on my problem.
I am running Ubuntu 10.4 LTS . I wish to share files and a printer over my network, it is on my main computer running XP . my ubuntu can see the printer but it will not print at all, it has the drivers Etc but it will not print. the personal file share said that i do not have the right package installed, but not which one!
I am running openSUSE 11.0 on a Toshiba laptop with the ATI Radeon HD3650 graphic card. After installing the ATI drivers using the "1-click-install" feature found in the suse wiki, the 3D acceleration seems to be working... sort of.
[Code]...
I haven't tried to launch Compiz. However when I try the OpenGL screensavers, they run fine in the preview but when I test them, they only show in what seems a 640*480 portion of the screen in the top left corner. The rest of my 1200*800 screen is blank.
I have installed OpenSuse 11.3 . System doesn't boot in NORMAL mode, system boots only in Fail-safe mode. In NORMAL mode i have kernel panic (may be i am wrong, but Caps Lock + Scroll Lock are blinking synchronously during NORMAL boot). ATI Radeon HD 3650 AGP figured on thread Subject because i am sure that the problem is in this video card. 2 weeks ago i have installed ATI Proprietary driver for this card and system successfully boot in NORMAL mode without any kernel panic. You may ask me, "What the problem, install this driver again and have fun!". The problem is that when I install this driver and boot in NORMAL mode video sub system works very slowly. For example one mouse scroll in Internet browser takes 2 seconds to redraw the window. It is not only browser window problem. It refers to all windows. I even can see the wave from up to down on the screen when any window redraws. Very poor performance of 2D video. So , installation of this driver is not the solution.
In the Fail-safe mode 2D video performance is not so cool as at Windows XP but is much more better than in NORMAL boot with proprietary driver installed. Now I have clean installation of system without any drivers installed over distributive. now system configuration:
1. Motherboard: Intel 845D(has on board AC'97 sound, but this sound is disabled in BIOS currently)
2. CPU:Intel Celeron 1.7 GHz.
3. Main memory: 1,5 GB DDR 266MHz.
4. Video card: PowerColor ATI Radeon HD 3650 AGP (512 MB, 64 bit).
For some time, almost since it came out, I've been using a single Radeon HD 3650 with two (dissimilar) monitors. It's fine and works well with fglrx and openSUSE. ( Although now that I come to think of it, openSUSE 11.3 does only have preview support in my current fglrx. ) I now have a second, identical card. My hardware is:
Video cards: 2x Sapphire Radeon HD 3650 Motherboard: Gigabyte GA-MA790X-DS4 1.0 Also... CPU: AMD Phenom II X4 940 Black
[code]...
My video card did come, if I remember rightly, with a crossfire bridge but that has been thrown away (not by me). However the motherboard specifications do include support for CrossFireX. I've tried, although with very little understanding of how, to use aticonfig to set up my cards for crossfire. As it stands crossfire is not enabled and aticonfig claims that it does not support this platform:
Code:
# aticonfig --cfa --adapter=all --crossfire=on CrossFire chain added Warning: X needs to be restarted before CrossFire changes take effect. CrossFire chain(s) enabled
I have installed OpenSuse 11.3 . System doesn't boot in NORMAL mode, system boots only in Fail-safe mode. In NORMAL mode i have kernel panic (may be i am wrong, but Caps Lock + Scroll Lock are blinking synchronously during NORMAL boot). ATI Radeon HD 3650 AGP figured on thread Subject because i am sure that the problem is in this video card.
I have been trying to set up printing on my Fedora 10 machine so I can print with a remote printer on my LAN that is attached to a Windows XP machine. I went through the whole configuration process, selected a samba printer, put in the correct UNC and driver- it is an HP psc series 1210, the printer was detected when I selected browse during the configuration process so I know I've entered the right UNC. When I try to print a test page or anything for that matter the printer starts as if it is going to start printing but nothing happens. When I go into printer properties it tells me that I have a Remote Downlevel Document and that it is printing but nothing is happening. I've tried restarting the print spool service but nothing works.
I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
How can I do the printing job over the network .I have only one printer on my firm Its not network printer here whole system are in LAN how can i gain the printing job
I'm trying to enable power management on my ATI Radeon HD 3650 video card (GPU: ATI RV635; see my Smolt profile). I'm using the open-source radeon driver (xorg-x11-drv-ati-6.14.1-1.20110504gita6d2dba6.fc15).I've followed the instructions found on the Arch Linux Wiki.In order to verify if power management really works, I've tried to enable the "low" power profile through these commands:
I've also added the above-mentioned commands to /etc/rc.local to have them executed at startup.Although this page on the X.Org Wiki says that power management on my video card is supported by the radeon driver, GPU clock frequency doesn't seem to decrease: cat /sys/kernel/debug/dri/0/radeon_pm_info reports
I can not porpperly boot into live CD. I get the option menu in beginning and when i select the liveCD option it starts loading the kernel and then screen gets garbled. full of very small dots. Its liek the graphics card is not recognised propperly. I've read about similar issue here: ATI Radeon HD 3650 AGP boot problem
but as i see the user's specific problem in taht thread was caused by having an AGP card and on an older version. however my card is PCI. it should boot normally. i haven't tried nomodeset parameter mentioned in that thread, but the card shouldn't need it anyway.
I'm running Mint 9 as my main network and my wifes Acer Aspire 5610 running Windows vista. My problem is that I can't print from vista. It prints a test page just fine but when I tell it to actually print a document, the status says: "Access denied, unable to connect" I have 2 printers connected and they installed fine in Vista one is a HP LaserJet 2100 series and the other is an HP Photosmart C5280. Like i said, they both print the teat page just fine.
The Hardware: Mac Mini late 2009 running 10.6.4 (Snow Leopard/OS X) Dell Dimension 2400 running Ubuntu 10.04 Lucid Lynx HP Photosmart C4680 multifunction printer/scanner/copier Canon PIXMA MX310 multifunction printer/scanner/copier/fax Netgear Wireles-N 150 router model WNR 1000v2
[Code]...
As the HP Photosmart printer is currently connected, it is visible over the network by the macintosh however will not print (all jobs appear in the macintosh's queue without a "hold" designation, printer not on pause. pause/resume only changes the tag on the printer but does nothing to cause the queue to begin printing). Although I can navigate within the printer setup to the existing printer on the network, I cannot connect the printer on the mac without finding a new "printer" instance on the Ubuntu machine when I get there. The printer instance which works is the one the Ubuntu machine created, and the printer instance which does not work is the one generated by the mac, which doesn't work either from the mac or when printed to from the Ubuntu machine, now that this instance exists there.
With the printer connected to the mac, it is visible over the network to the ubuntu box however asks for authentication for the print queue and will not accept any password established for either machine. It also does not specify what account name the password should match with so is an utter quandary.
lastly, I did run dmesg but the result was too large for my terminal's log and scrolling back through it I did not find a section relevant to the HP (or Canon) printer to post here.
From my Ubuntu Server 8.10, when i attempt to print to my network printer(Brother HL2700cn) it prints garbage and multiple blank pages. I also tried installing the Brother print driver (BR2700_2_GPL.ppd) as instructed, placing the file in directories: /usr/share/cups/model and directory /var/spool/lpd and restarted cups: /etc/init.d/cups restart. after all that, i get the same results, garbage and multiple blank pages. the printer has a static ip address
