OpenSUSE Hardware :: No USB-Mouse And LAN After Upgrade To 11.4?
Apr 10, 2011
After upgrading from 11.1 to 11.4, USB-Mouse and USB-Keyboard aren't working anymore. Only a PS2-Keyboard works. The (wired) LAN is disabled as well. During Upgrade-Process all these devices were running (e.g.downloading from online-repositories was working).Maybe its the problem, that there are some modules missing:lsmod found only: dm_mod, sg, ohci_hcd, ehci_hcd, ssb, mmc_core, usbcore, pcmcia, pcmcia_core, edd but no usbhid! (I think that is needed for the usb mouse) The boot-log says:"eth0 No interface found"But the Mouse is detected (during boot and when plugged on later) and only does not work:"usb 4-2: New USB device found.....usb 4-2: Product USB-PS/2 Optical Mouse"(By the way, a USB-Memory-Stick is working)Mouse-Section at xorg.conf is fine (with Driver "mouse"), xorg.0.log says at top:(**) | -->Input Device "Mouse[1]" ; that is the correct one, but later on:(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled(WW) Disabling Keyboard[0](WW) Disabling Mouse[1]It might also be some problem with the AMD/ATI Chipset (740G, SB700) although the USB-Ports are on southbridge but the LAN-Jack is on Northbridge and although everything was working fine with Suse 11.1.
Just upgraded to 11.3 from the terminal. There were a few hiccups, but it said to run "zypper verify," and it downloaded a few files and finished. When I rebooted, the graphics were fine, but the arrow in the middle of the screen is frozen. I can move the mouse till I get carpal tunnel, but the arrow ain't gion' nowhere. So how do I "unfreeze" my mouse? (Besides knitting it a sweater!) I'm hoping for a "ctrl/f2", and that aterminal can be opened that way, with a command to wake up the mouse dameon.
Just upgraded to 10.04 (x64) and found that the mouse speed for X plane is much faster than for Y plane. Tried looking in KDE mouse settings but didn't find any setting to change that. Mouse was fine before upgrade.
P.S. the "mouse" is actually a touchpad in HP Pavillion dv7.
Updated to 10.o4 LTS and after the purple screen with Ubuntu 10.04 logo comes up, the log in screen shows but the keyboard and mouse cease to respond. So I am stuck at the log in prompt unable to input the password to continue boot up. PC has no PS/2 connectors available, only has USB ports for USB keyboard + mouse. Boot in recovery mode is possible, and after log in I have a command prompt available.
Just upgraded to 10.10, which went smoothly except for the fact that my mouse pointer is now gone. I can track where it is by ticking on the function that shows its location when you press control, but otherwise it's invisible (though technically functioning - I can still click on things and move it about).
I've attempted to change the look of the mouse under theme in the hopes that it might be one that doesn't work, but after trying all of the selections I still haven't found one that will display.
I recently upgraded to Ubuntu 10.04LTS. After completing the upgrade I lost use of the keyboard and mouse. I am able to type before the system loads but after loading- nothing.I tried connecting a USB mouse and that wouldn't work as well.
I recently upgraded to 10.10 and basically everything works fine. However, in games such as quake 3 my mouse doesn't work, the cursor just doesn't move at all. I can use the keyboad,graphics and sound are fine, and the mouse works outside of the game as usualI am on kubuntu 10.10 64bit here, 2.6.35-22 kernel, and nvidia geforce gts 240 with 260.19.06 driver.
I had an ill-advised upgrade from Ubuntu 9.10 to 10.04 (due to needing to beta-test a particular program). My gut told me that I shouldn't do it, but I went ahead and did it anyway. The problem that makes this worse is that I have an ATI Radeon HD 3650, and ATI hates Linux. So upon booting into 10.04 I ended up with no screen. It took a lot of futzing around in the terminal to get things going (including making an xorg.conf file). Installing the ATI proprietary drivers (Catalyst) was an epic failure. Trying to make "radeon" the driver? Epic failure, resulted in a completely unbootable system.
To at least get the system to boot, I deleted xorg.conf (since 10.04 allegedly will discover devices automatically without it) and played around with options in GRUB. Please see my attached menu.lst; that should be my only configuration. The other issue at this point is that my only working driver (that I can find anyway) is vesa. Unfortunately, when using Vesa, my mouse wants to scroll everything down and to the right. This means that if I open any window that has a scrollbar, it will move such so that the scrollbars are to the other end. This makes it all but impossible to make things work.
To make matters worse, now my WINE (specifically, Irfanview) cannot view GIFs. But at least I have a workaround (FTP) to get things to where I can work on them.) At this point I'd be satisfied if I could just get the mouse to stop messing up. I accidentally made it work at one point but I can't retrace the switches I set to make it so. I've tried setting a basic xorg.conf, an ATI-generated xorg.conf, and now no xorg.conf.
I just upgraded from F11 to F12. Everything seems to be nice except mouse. The mouse buttons (both left and right, except middle one) are accidently frozen for some times. It could happen when opening a new tab in Firefox, launching a program, opening a new windows. I cannot click anywhere but can use mouse wheel. I have to log off/ log in and it becomes normal. It does not happen so frequently (around 3-4 hours) but it is really annoying.
yesterday i upgraded to f13 and it works perfect with preupgrade but now my mouse-scroll are very fast. under the mouse-settings in gnome i fund no option to lower the speed. where can i lower the scroll-speed?
Before I upgraded, I used Ubuntu 9.04 on my Playstation 3. It worked absolutely fine. A couple of days back, I decided to upgrade to ubuntu 9.10 using the update manager. The installation process seemed to go fine, until I booted up the new version. When I booted up, my mouse cursor wouldn't move, whilst my keyboard worked fine, I unplugged and plugged it back in and swapped USB ports, but it came to no use. I reinstalled Jaunty and tried the entire installation process again. After installing the new version again, the same problem occured, my mouse just wouldn't work.
When I type in the command 'uname -a' it comes up with something (I apologize, I am a Linux noob) to do with the 2.6.24 Linux kernel, Ubuntu 9.10 is on the 2.6.31 kernel. Is this the problem? I don't understand what is going on or what the solution is. My mouse is a HP optical mouse if that helps. I can't bring up the terminal window because my mouse just doesn't work, which is really annoying me.
Everything worked fine with Jaunty 9.04, but I haven't had any luck getting the "cube" to rotate using the mouse wheel since I upgraded to Karmic 9.10. The other ways to rotate the cube still work with karmic. Note that I upgraded from jaunty to karmic...not a clean install. Viewport switcher and rotate cube are both enabled.
I am using 10.10, yesterday I did an upgrade using update manager. After restart, booting stops at login screen, keyboard and mouse is not working. I tried login into recovery mode as well as previous kernel versions nothing is working. I tried to login into single user mode even that is also not working.
"Select windows when the mouse moves over them" does not work after an upgrade. I'm still using the Ubuntu Classic desktop configured for Metacity. Anyone know how to fix this without resorting to Unity?
my mouse wouldn't work in any fashion after going through most of the install process from Debian Lenny to Squeeze (couldn't click, move the mouse, etc. under both Compiz and Metacity). My system is a Lenovo ThinkPad T61 laptop; I keep the touchpad disabled, but the button mouse (TrackPoint) wouldn't work either. I was following the instructions here:
[URL]
So, the first thing I did was run the following commands, as it says to do:
Then, I rebooted my machine into the new kernel (2.6.32-5-686). I got a ton of udev warning messages at startup (all along the lines of "SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in something-or-other" - details can be provided if needed), but got a functioning prompt. I logged in, ran startx, and everything worked except the mouse, which couldn't do anything - as if it wasn't recognized at all. Switching window managers from Compiz to Metacity, as mentioned before, didn't help. "modprobe psmouse" revealed that that module was correctly loaded.
Rebooting into my old backported kernel (2.6.32-bpo.3-686) restored mouse function, although I still had the udev warning messages (so maybe those aren't relevant, I don't know). Apparently, something about the different kernels is causing the problem, but I'm not sure what - any thoughts? I haven't wanted to complete the upgrade with "apt-get dist-upgrade" without knowing that I'll have a working mouse, since I need a functional GUI at the moment and don't have a good way of fixing it if I trash it.
I just upgraded my 9.10 on my laptop to 10.04. I seems to have gone well except for one annoying problem. when I boot up I get a large X for the mouse pointer instead of the normal arrow. When I start an application it will not go to full screen and there are no close/minimise/maximise options. Nor can I get to the top or bottom menu bars.
I can cure this on a temporary basis by right-clicking on the desktop and changing the visual effects from none to normal. The problem is that it does not stick. Each time I boot up I have to make this change.
I have Ubuntu 10.10 Desktop Edition i386 version. It was recently working fine until i installed few updates that showed in Update Manager about total size of 200Mb. During the installation BUG USB (blue screen) error comes and laptop restarted. Now i restarted the laptop and from now my mouse and the keyboard not working. I am not able to even login to the system. Not working now anything.. Details: I am running Ubuntu 10.10 Desktop i386 on VMWare Workstation on Windows Vista.
I upgraded from 9.04 to 10.04 then 10.10. Now my left mouse buttons doesnt work when I click the pplications menu. Sometimes it doesnt work at all. left or right click. This is very frustrating to say the least. I have seen a few posts that look similiar and have tried what they sugested, but it still doesnt work. I have tried different mice, but it is the same problem. I dont see any error msgs in any logs I look in. Im thinking my next step is to reinstall, which Im not too excited about.
Is anyone else having issues with their mouse/keyboard responsiveness via Synergy after upgrading to 11.04?
If I plug mouse and keyboard directly into the desktop the issue goes away. But when I connect via QuickSynergy and share my mouse/keyboard the mouse is very slow and has low sensitivity.
since I just upgraded my Natty to the new Kernel my Logitech USB mouse won't work anymore. I checked it on another notebook and the mouse works fine Before the upgrade, everything was fine as well.
Code: xaitax@w00t:~$ uname -a Linux w00t 2.6.38-9-generic #43-Ubuntu SMP Thu Apr 28 15:23:06 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
I recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
I have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code: Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko [ 3.158099] usb 6-3: Manufacturer: Cideko Inc. [ 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2 [ 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
Running Landmarq Intel Atom DC330 Desktop I have just attempted to upgrade my desktop machine from Kubuntu 10.04 to Kubuntu 10.10. I used KpackageKit to do the upgrade which proceeded smoothly until the install packages phase, which seemed to complete and then repeat. I don't know the detail of what happened as I was out of the room.
The repeat almost completed, but then I got a set of error messages, which basically told me that KpackageKit was unable to install the upgraded packages. I closed KpackageKit, and closed the machine and tried a reboot. This time, I got as far as the splash screen, but although the cursor flashes, I can't type anything in the password box. In addition, the mouse pointer won't move. Using a different wireless mouse works, but I still can't type in a password.
However, the command ctrl+alt+sysrq+RSEIUB works, so the machine is accepting some keyboard input. I also know from using a live disc that my home directory is intact. I would like to revert to my 10.04 installation, and re-try an upgrade to 10.11 afterwards.
After I have upgraded from 10.10 to 11.4 I have a very strange problem. My desktop seems to be unresponsitve to mouse right or left clicks. The file browser only starts if I use thunar. Nautilus will not run at all. I am not sure if they are tied together but everytime I reboot i get the error message the file browser is still open. If my iphone is plugged in i get a metacity error. I am booting into classic with no effects. I can work kinda but mostly starting everything from inside a terminal. Also Nautilus only will run if I start it under sudo...
I tried to upgrade my Ubuntu 10.10 to 11.04 on my netbook. I choose the option to upgrade on the Update Manager. All packages had been downloaded, and the installer was busy to replace all the old packages.
During the update I noticed that my internet stopped working, so I disabled my wifi, so it couldn't interupt the upgrade. After a half an hour, I found out my internet worked again, so I pressed the wifi-button again on my laptop, so the wifi would turn on, but after that move my screen hanged, and the upgrade wasn't done yet. I pressed the powerbutton for 5 seconds, because there was nothing else I could do.. Everything just hanged, no mouse movement, no hard disk activities, just a frozen screen.
After this problem I rebooted, and I already knew what I was going to see, Ubuntu couldn't be loaded anymore (and it still can't).
Is there anybody who can help me to restore my laptop? There are really important things for college on the harddisk in the /home/ folder, but I was too stupid to forget to make a backup.. I mostly make backups of everything you can think of, but I thought it won't be neccessary.. damn..
I know that you can restore files using a live-usb (no cd, because it's a netbook), but I choose during the installation the option to 'encrypt' my documents.. So is it still possible to restore my documents, photo's etc. from the home-folder? I really need to get those things back..
When I try to boot all I get on my screen is the text (in Dutch): 'Disk partition / is not ready or is not found - Keep waiting or press S to cancel mounting, or press M to recover manually' The manual recovery doesn't do anything at all, and by the way, booting in the 'recovery mode' won't work either.
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
i want to upgrade to 11.2, however, i am very cautious about losing my files. there are files on this system which i absolutely can not afford to lose, and they are only on this system. which method of upgrade will be the best, best as in safest.
I've recently upgraded from 8.04LTS to 10.04LTS. About 90% of the time after boot-up, my mouse cursor seems to be corrupted; I can vaguely see the arrow (or part of it anyway) underneath some squiggly lines. The application KeePassX is affected too; there are some display corruption issues. Sometimes (maybe 1 boot in 10) the mouse cursor looks fine. I have a Radeon 9200 and have looked in the Forum for similar problems but they don't quite match up to mine.
