I recently installed Ubuntu 8.10 on my pc. I am running a Matrox Millenium G400 Dual-head video card. I am trying to install the driver, so I went to the matrox website and downloaded the latest driver for linux. The only problem is, I have no idea how to install it . I am new to linux so the readme file did not help much, as I am unfamiliar with terminal.
View 3 RepliesI have an older Dell Latitude (with an atitude). I noticed that scrolling down web pages and such has been painfully slow. I didn't have that problem with Windows installed and so it just goes to reason that the video driver is not right. I selected "display driver update" (or something like that) from one of the menus. It saw that I needed an update to the nVidia driver. I authenticated the request and it downloaded and supposedly installed the update. Now I have no video. I get the splash screen and the start-up scripts but then after it loads, it goes black.
I'm not the sharpest knife in the drawer with Linux because I've primarily been an operator with it for years. I never had any admin privileges until I finally decided to install it on my home systems. That being said, what do I need to do to get this to work?
Somehow my video driver got deleted and now all i can access is a terminal and no gui. how do i reinstall my video driver?
View 3 Replies View RelatedIs there any way to install my video card driver from command prompt? I can't seem to get into full screen mode to run the application. Is there an apt-get install package for the new video card driver? This is the second time I've installed Ubuntu 10.10. I gave up on 11.04.
View 5 Replies View RelatedI'm running a slightly upgraded Dell Inspiron B120 with 2 Gig RAM, 200 Gig HD. I recently switched this laptop from XP to Ubuntu 9.10. After many a long hour, I was able to get World of Warcraft running under wine but its slow to the point of being unplayable. I was used to slow gameplay on this laptop under XP, but 0 fps is a new low. Dalaran (the notoriously laggiest place in the game) is a joke. There's a 5-10 sec lag between hitting the button to move and actually going anywhere. I took all the video settings down to the minimum and did a regedit to add a key for wine.
Basically I tried all the tips and tricks I could find (including creating an xorg.conf file since I didn't have one). Nothing I did worked. I can be in the most remote, unpopulated spot in the game and I can't get more than 3fps. Somewhere I read that I should install a proprietary driver for my video card (intel GMA 900). So I went out and downloaded xf86-video-intel-2.10.0 and ran the configure script that came with it. It came back and said
Code:
No package 'xorg-server' found
No package 'xproto' found
No package 'fontsproto' found
so I went out and found Xorg-Server-1.7.1 and ran its configure script which gave me
Code:
No package 'x11' found
I tried setting $PKG_CONFIG_PATH to /etc/X11/ with no joy.
Now I am new to linux but in poking around the file system I did see /etc/X11/ which had some stuff in it. To me that says that I've got X11 installed but then again I've been using linux since breakfast so what do I know? What do I need to do to install a proprietary video driver -OR- what can I do to get the game running well enough to be playable (short of walking over to my windows desktop computer)?
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies View RelatedI am following the how to at ATI drivers - openSUSE and I am getting an error. I installed the opensuse 11.2 x64bit version and I have a Radeon x600 video card. When trying to install the propietary driver (which I guess I need to enable 3d HCL/ATI Video Cards - openSUSE) I get the following error:
administrator@linux-fsvg:~> su
Password:
linux-fsvg:/home/administrator # zypper in kernel-source linux-kernel-headers kernel-syms module-init-tools
[code]....
I've been trying to install the newest video driver from Nvidia (v240) which uses a .RUN file in Ubuntu 9.04
I have been unable to completely shut down X in order to install it. IF you try even alt-ctrl-F1 it still insists on being out of X or the GDM. I've messed up my system 4x trying various things including renaming the xorg.conf file to 'old.xorg.conf' and 'Xsession' to 'old.xsession' thinking I could reverse the problem easly.
I am trying to install FC10 from a DVD. It gets to the part where anaconda starts a graphical install then the monitor goes "no signal". I am assuming that the video driver anaconda loaded is not compatible with my card. What can I do to address this and proceed with the install?
View 5 Replies View RelatedI'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies View RelatedI'm a new user of fedora12 and I'm a beginer in Linux, I'll apreciate if someone tell me how to install a driver for my video card (nvidia 9400GT) because when I try desktop effect fedora disply an error "require hardware 3D support" and that tell's me I don't have the appropriate driver.
View 7 Replies View Relatedhow do you install an nVidia video driver?
View 1 Replies View RelatedThe nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies View RelatedI think to change my video card.But i was asking myself, it is not good idea first to install the driver and then change the video card?What is your opinion
View 6 Replies View RelatedI have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
I think to change my video card. But i was asking myself, it is not good idea first to install the driver and then change the video card?
What is your opinion?
I am setting up Fedora 13 on a Dell optiplex 755 with the following video hardware installed:
/sbin/lspci -nn | grep 'VGA|NV'
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [FireMV 2200 PCI] [1002:5965] (rev 01)
How can I find/install the right driver for this video card?
OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
I am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
Being a newbe I had no idea what to do next.
I used commands below to install the driver,but when i executed the last command,it always outputted "no adapter detected",why? video cards ATI HD5650 was indeed insert correctly.Then i restart.unfortunately,i can't come into system.the screen was always flickering.I can't do anything but reinstall Ubuntu.Who can tell me why? thanks (my Ubuntu was installed in VMware workstation)here is commands i used:1.sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4
2.sh *.run --buildpkg
3.sudo dpkg -i *.deb
4.sudo apt-get -f install
5.sudo aticonfig --initial -f
I'm a freshman of Ubuntu OS.I want to know where to download the video card's driver of ATI HD5650 and how to install it in a way as easy as possible
View 3 Replies View RelatedI use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies View RelatedI have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
I have installed Open Suse 11.1 on two different machines. One contains an ATI X850 video card, and the other contains an ATI X1950 video card. I updated the ATI drivers on the 850 card and it works like a dream. I updated the ATI drivers on the 1950 card and Suse becomes unusable. System works fine before the update. Before the update I ran it at a resolution of 1280 x 1024. I thought I would lower it to 1024 x 768 to see if that would help, but it does not. I dual boot with WinXP, and card works fine with that setup at 1280 x 1024, so I would suspect this is a specific problem with my Suse setup as opposed to a Motherboard issue.
View 4 Replies View RelatedIf I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies View RelatedI'm trying to install an ati video card driver, but can't seem to get past this (see screenie)
When I click okay, I expected a prompt to put in my password, but everything just closes.
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies View RelatedI am running gnome 3 on ubuntu 11.04, a clean installation from the gNatty version, 32 bit. The machine is a Lenovo t420, with 6GB RAM and a integrated video card.
Everything is running smoothly but not for games. I tried urban terror, Tremulous, Nexuiz, all of the lags from the very beginning as if I was using a machine 5 years ago to run today's video games (ie, takes 10 seconds for a mouse move a show, audio lags, .etc). From my experience it should come from video card driver not installed, but the update manager shows all device works fine (indeed, the screen resolution is 1600X900).
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
I installed Debian recently, and everything seems to be working fine, except some video games are unusually slow compared to what they would normally be. Tremulous, for example, worked reasonably fine on this computer with Windows XP, but now (Debian) for some reason it's laggy even on the title screen.
Something wrong with my video drivers?
All of the information I know:
The computer is a Dell Dimension 3000
RAM: 256mb? Gnome System Monitor says 247.1mb, SWAP: about 730mb
Processor: Intel Celeron 2.40GHz
HD: 25gb out of a 40gb HD free, and an external 1tb HD with about 920gb free
Debian Release 6.0 (squeeze)
Kernel Linux 2.6.32-5-686
GNOME 2.30.2 (I've tried LXDE also, no noticeable change)
Only linux on the machine.
glxinfo told me this:
Code:
64 GLX Visuals
128 GLXFBConfigs:
lspci told me this:
Code: