I've installed skype, and the mic volume is too low. If i talk very loudly, I can hear my voice, but it's very faint. The ext mic boost/capture level in KMix is set to about 80%.
Running Suse 11.2
I'm having a problem with sound. No audio from speakers (multi boot system, audio works on other os). Plug in logitech headset, and very low audio volume (skype is not usable). Pandora is no output. lspci gives me 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
View 6 Replies View RelatedI'm using Ubuntu Natty 11.04 updated as of today (4-26-11) I can hear my mic through the speakers if I move the volume levels on alsamixer but I can't use it for Skype or recording.
[URL]
If I have a HDD with 3 particions, I have 1 MBR at the begining of the HDD, and 3 VBR (volume boot record). One VBR for each partition in the begining of each partition. But what I dont understund is if first VBR in the first partition (512 bytes) are the same 512 bytes in MBR?
View 10 Replies View RelatedSound Recorder is working fine. But when try to make normal call or test call I cannot record sound my internal mic in SKYPE. As I speak something immediately the sound level of mic drops to zero. Alsa driver are installed. HDA intel conexant mic.
View 1 Replies View RelatedI am trying to use a program called skype call recorder to record calls on kubuntu, i've read that you need to configure skype to use alsa in the sound devices menu, but there isn't an option to use alsa in my sound devices menu, it just shows my two sound cards, whenever i try to record i just get silent audio files?
View 2 Replies View RelatedI have some troubles with my microphone.I can hear it in ootput if I knock on it or speak, but I can't record from mic. It also does not work in skype.cant figure out what is the problem.
View 5 Replies View RelatedI finally get mic working. Problem I have now is the volume is very low in Skype, I have set it to 100% but it is barely discernible on playback from the Skype test.
View 9 Replies View Related basically I was having some problems with the audio in skype, and as per the instructions on this page, I ran
Code:
sudo apt-get purge pulseaudio && sudo apt-get install esound
(note: using apt-get not aptitude). The only effect this had was to remove the volume indicator/menu from unity's top panel and didn't fix the sound in skype. So I did
Code:
sudo apt-get purge esound
sudo apt-get install pulseaudio
and the volume indicator is still missing. And the audio still doesn't work in skype.
some application to record to what I am listening on? This might be some program that can capture for example mms output or just capture what ever I listen to.
View 9 Replies View RelatedI recently noticed that my libreoffice doesn't have the "Record Macro" voice that used to be in OpenOffice Tools -> Macros. Is that normal or have I installed libreoffice incorrectly?
View 6 Replies View RelatedI have read several guides about setting up a DNS server using Yast, now I am confuse, some guides use hostname in mx records and ns records, other guides uses alias, with the respective A record not been the hostname but and alias, Now, I have a DNS server with the hostname server01 with the ip address 192.168.0.10 and a router with the address 192.168.0.1, this server is also the mail server, how will be registered the NS record, and MX record and the A record in yast for this server?
I was thinking in ns record as
server01
MX record
server01 with the value of 0
and an A record
server01 A 192.168.10
I'm using openSUSE 11.2 x86_64 and I've installed OpenOffice.org 3.2.0 from Index of /repositories/OpenOffice.org:/STABLE/openSUSE_11.2 . However, the menu option Tools->Macros->Record Macro is missing (it is present in the official build of OpenOffice.org for windows and the one distributed in archlinux). Is this a bug? I've searched the Novell bugzilla for resolved and open bugs for this, but I've found nothing.
View 1 Replies View RelatedAs in title, I'm using Libre Office on my OpenSuse 11.4 and there is no 'Record' option under macro. I have search the net and some suggest this solution - to check box 'Enable experimental features' in Options. I did that but still no Record Macro at all.
View 6 Replies View RelatedI have 2 soundcard - a M/B built in Intel AC97 and an old Aureal (later SoundBlaster). This is because there's a problem with Intel's microphone in XP. So I use Intel for playback and Aureal for recording.
Now, how do I duplicate same setup in Suse (to avoid switching plugs) ? I am a bit lost in where to specify hardware to be used for recording and playback.
I created a live USB stick following the instructions at [URL] installing openSUSE-11.2-KDE4-LiveCD-x86_64-iso and booting a Motion LE1700. openSUSE works great but any file I create is lost after I reboot. I created the second partition with the script listed the instructions. Is there any anything else to do to make the live system mount the second partition?
View 5 Replies View RelatedIs there an app that would enable me to record from Pandora dot com?I've tried Stream Rip Star but I couldn't get it to record.OS 11.2 64 bit
View 1 Replies View RelatedI've got sound - I hear all the system sounds, I can play sound files, CDs, etc. But I have not been able to record and play back anything with success.
Originally, when I would record (either with arecord or with audacity) I would get extremely low quality sound, with lots of noise and crackling, and my recorded voice was barely audible (even with volume turned up to max). I played with alsamixer for hours without being able to improve matters.
Things are worse now. I tried installing alsa-firmware, as indicated at SDB:Audio troubleshooting - openSUSE. I also tried updating alsa following instructions given at SDB:Alsa-update - openSUSE. I'm not sure which of these changes did it, but the result is that I can no longer record ANYTHING at all. I get absolutely nothing, not even the low quality noise and crackling I was getting before. It's as if there is no audio input at all.
Uninstalling alsa-firmware and reverting back to the older alsa version (1.0.20) didn't change a thing.
I'm running openSUSE 11.2, kernel 2.6.31.14-0.6-desktop, alsa 1.0.20. My sound card is a Creative X-Fi (by the way, yast cannot detect my card, another problem I have never solved).
I am looking for software that will record streaming videos from places like Utube. I have one for Win but am interested to find a way in Opensuse.
View 2 Replies View RelatedI just buy a cheap Belson TV with recording feature on USB. I get a "ts" file, as usual. and as usual, the sound is not in sync, due to frames dropped. Last time I did so (with other hardware), I simply played the movie throuh an other recorder to get the mpg file, but now I can't anymore. So I try to find a good "ts" editor (I have a lot of unusefull video before and after the movie). Avidemux edits but do not fix the lost images/out of sync sound.
The tools mostly advertised for this use is "projectx". I have it on my openSUSE 11.3, but I fail to make it work :-(. I find no manual, except a very old (2004) one in english, and I don't read german :-(. Do you know of any english manual uptodate and understandable. projectx runs, but no of the files I get is readable by vlc or mplayer.
I have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
how to record/save logout/shutdown messages for OpenSuse 11.2.
View 9 Replies View RelatedI would want to record/edit/save music from the microphone (convert a tape to CD). But. I start audacity, leave everything at default, record the music, and play back. It plays agonisingly slow. I can change the sample rate manually such that it sounds good, but this is just a guess (I could for example measure the recording time, and adjust the sample rate after that, such that the displayed time on the timeline fits this time). Why the hell do I need to do this? Why is the recording sample rate = playbe sample rate not producing correct output?
View 3 Replies View RelatedA few days ago I setup a pc. It contains an "Intel ICH5" sound card. Before I begin posting all the configuration stuff I've tried so far what the standard procedures are to set it all up for recording the sound card output (with Audacity)?
On my older computer it all worked fine but now I only get silent recordings. However sometimes (when I played on the controls the right way...) I get recordings where you can (amoung some noise) recognize the stuff I actually wanted to record very low... Apart from Audacity I've also tried
Code:
arecord -vv -fdat audio.wav
which didn't work either. That's why I think the problem is not related to Audacity but to the system.
Is the combination of OpenSuse 11.2 + ALSA + Intel ICH5 commonly known to cause such trouble?
I have a fresh install of openSUSE 11.4 with KDE. This includes ALSA and Pulseaudio.
I have a mic and speakers and a webcam. As far as I can see microphone and sound reproduction work, the webcam also works:
- I can arecord and aplay
- KMix works
- amixer and alsamixer work (I am using microphone boost)
- test sounds play
- the webcam works in "Personal Settings (Configure Desktop)": Hardware > Multimedia > Phonon (test camera)
- Pidgin and Empathy work with sound and video.
(had to set this: gconftool-2 --set --type=string /system/gstreamer/0.10/default/audiosrc pulsesrc,
without this setting it was set to alsasrc by default and Pidgin and Empathy didn't work).
I installed Skype 2.2 (also tried 2.1) and tested the video camera in Skype. Result: doesn't work.
I made a test call: I hear the voice of the lady answering the call, but my own voice is not recorded.
In Skype everything is set to use Pulseaudio.
I am at a total loss to understand what is going wrong here. Why does Skype not work, when everything else does??
I made this observation:
When an application records something, a "Capture stream" shows up in the KMix "Capture Streams" tab. For example, when I use arecord, "ALSA capture" shows up, while I record. When I make a call on Empathy, a capture stream shows up in the said tab.
When I make a Skype call, NO capture stream shows up, so obviously Skype is not capturing anything.
I just installed SuSE 11.2 on top of where 11.1 used to be on my hard drive. Acronis Operating System Manager will let me boot into XP Pro but it tells me it cannot find SuSE in the master boot record. If I repair the master boot record in SuSE, XP Pro disappears. What do I do?
View 1 Replies View RelatedhJust installed brand new Centos 5.6 and skype, according to centos wiki (http://wiki.centos.org/HowTos/Skype) Getting these errors: skype: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by skype)
[root@thinkpad opt]# rpm -q libstdc++ --provides
libstdc++ = 4.1.1-52.el5
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(CXXABI_1.3.1)(64bit)
[Code]...
I've read and execute the info write in this guide :
[URL]
When I type skype , I receive this message :
bash: skype: command not found.
There are 3 versions of Skype for Ubuntu on the Skype download section. Does anybody know which is the correct one for Ubuntu Karmic?
View 5 Replies View RelatedSince there is no notification area any more in 11.04, where is the skype icon of the running skype instance?
View 2 Replies View Related