OpenSUSE Network :: Confused About MX Record In DNS
Jan 4, 2010
I have read several guides about setting up a DNS server using Yast, now I am confuse, some guides use hostname in mx records and ns records, other guides uses alias, with the respective A record not been the hostname but and alias, Now, I have a DNS server with the hostname server01 with the ip address 192.168.0.10 and a router with the address 192.168.0.1, this server is also the mail server, how will be registered the NS record, and MX record and the A record in yast for this server?
I was thinking in ns record as
server01
MX record
server01 with the value of 0
and an A record
server01 A 192.168.10
View 9 Replies
ADVERTISEMENT
Jan 31, 2010
I know that this is easy, but I am confused.I have three computers all with a clean install of SUSE 11.2. Two of them use wifi with the internet and the third is wired.I would like to share files between them all of them.When I go to dolphin/network there is nothing there and I don't know how to set it up.
View 1 Replies
View Related
May 24, 2011
i read the sticky post on here about how to try and get my wireless card working.
i have installed opensuse 11.4
i followed step 1 of post and got following: /usr/bin/lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
View 9 Replies
View Related
Jan 13, 2010
I am building new AMD PC and done lot of research on motherboards, now I am getting confused with the two motherboards, ASUS and Gigabyte..I am searching for a board with no integrated VGA and no SLI with 5.1 audio, good price.I heard that some motherboards of Gigabyte caught fire.
View 9 Replies
View Related
Oct 28, 2010
But I am truly confused. I have searched the Multimedia & Video forum for some help about my TV stuff. I've found nothing I can apply to my system. I want to watch American ATSC tv, record on my hard drive and if possible schedule recording for another time. But I would take watching and recording alone. Recently, I asked, in another Ubuntu forum, if the drivers for what I think are necessary for my TV-card (AVermedia A188 'Duet' Duet for dual tuenrs on 1 card) are now in-built into the kernel. The reply was:
LGDT3305 and SAA7160
With the LG
/lib/modules/2.6.35-22-generic-pae/kernel/drivers/media/dvb/frontends/lgdt3305.ko
/lib/modules/2.6.35-22-generic-pae/kernel/drivers/media/dvb/frontends/lgdt330x.ko
With the Philips this was closest:
/lib/modules/2.6.35-22-generic-pae/kernel/drivers/media/video/saa7164/saa7164.ko
so, my AVermedia Duet should work?
I tried Me-TV and it said I had no DVB devices available. I tried TV Time and the "screen" flashes on screen and vanishes off-screen. I tried lspci | -vnn (or something I found in another post and they got some terminal output) and the terminal returned nothing for me. I tried to look at DMESG, and saw some stuff about the recently installed TV Time, but I cannot understand enough of it and won't post that long string of lines unless asked. I looked at the Video4Linux hardware section and I think that this AVermedia card, a pci-express device is working, although they don't specifically mention it. Only that SAA716x is working.
Reading some of the posts at Multimedia and Video, on a search for AVermedia, I see some people installing dvb-utils or some similarly named applet. That applet scans for digital tv signals and creates a list, which when added to some other existing file, allows some TV application to find the channels. I tried to install that and aptitude returned -no such program-.
View 3 Replies
View Related
Jul 14, 2011
I have been looking for a solution for this but am not certain how to word it to get a viable answer.My scenario:
Athena
Win7/Ubuntu 11.04
eth0 10.11.12.100/16 gateway+dns: 10.11.12.1
[code]....
View 9 Replies
View Related
Oct 28, 2010
I'm running Ubuntu Server 10.04 to provide DHCP and Internet Sharing on my home LAN. In a previous configuration, I was running Fedora + AMAHI to provide the same services. As most of my linux devices are Ubuntu, I decided to decommission and rebuild my server. I've been able to configure all of my services with the exception of one. As a rule, I assign static IP or reservations based on MAC address's for any of my network devices or appliances.
One cool feature that AMAHI provided a GUI for, was the ability to recognize devices by name as well as IP. i.e.. "http://192.168.1.50" or "http://home-NAS" Going from memory, the long name upon first entry may actually have been "http://home-NAS.adomainname.com"? From my reading, I think I either need to setup up a Static Alias or CNAME for each assigned IP. I can't find any tutorial's that will walk me through this process. I'm guessing I need to generate the records under one of the master DNS zones, but that is just a guess?
View 1 Replies
View Related
Mar 4, 2010
I've installed skype, and the mic volume is too low. If i talk very loudly, I can hear my voice, but it's very faint. The ext mic boost/capture level in KMix is set to about 80%.
Running Suse 11.2
View 9 Replies
View Related
Nov 11, 2010
some application to record to what I am listening on? This might be some program that can capture for example mms output or just capture what ever I listen to.
View 9 Replies
View Related
Jun 15, 2011
I recently noticed that my libreoffice doesn't have the "Record Macro" voice that used to be in OpenOffice Tools -> Macros. Is that normal or have I installed libreoffice incorrectly?
View 6 Replies
View Related
Mar 3, 2010
I'm using openSUSE 11.2 x86_64 and I've installed OpenOffice.org 3.2.0 from Index of /repositories/OpenOffice.org:/STABLE/openSUSE_11.2 . However, the menu option Tools->Macros->Record Macro is missing (it is present in the official build of OpenOffice.org for windows and the one distributed in archlinux). Is this a bug? I've searched the Novell bugzilla for resolved and open bugs for this, but I've found nothing.
View 1 Replies
View Related
Aug 6, 2011
As in title, I'm using Libre Office on my OpenSuse 11.4 and there is no 'Record' option under macro. I have search the net and some suggest this solution - to check box 'Enable experimental features' in Options. I did that but still no Record Macro at all.
View 6 Replies
View Related
Jan 24, 2010
I have 2 soundcard - a M/B built in Intel AC97 and an old Aureal (later SoundBlaster). This is because there's a problem with Intel's microphone in XP. So I use Intel for playback and Aureal for recording.
Now, how do I duplicate same setup in Suse (to avoid switching plugs) ? I am a bit lost in where to specify hardware to be used for recording and playback.
View 5 Replies
View Related
Apr 1, 2010
I created a live USB stick following the instructions at [URL] installing openSUSE-11.2-KDE4-LiveCD-x86_64-iso and booting a Motion LE1700. openSUSE works great but any file I create is lost after I reboot. I created the second partition with the script listed the instructions. Is there any anything else to do to make the live system mount the second partition?
View 5 Replies
View Related
Feb 16, 2010
Is there an app that would enable me to record from Pandora dot com?I've tried Stream Rip Star but I couldn't get it to record.OS 11.2 64 bit
View 1 Replies
View Related
Mar 17, 2011
I've got sound - I hear all the system sounds, I can play sound files, CDs, etc. But I have not been able to record and play back anything with success.
Originally, when I would record (either with arecord or with audacity) I would get extremely low quality sound, with lots of noise and crackling, and my recorded voice was barely audible (even with volume turned up to max). I played with alsamixer for hours without being able to improve matters.
Things are worse now. I tried installing alsa-firmware, as indicated at SDB:Audio troubleshooting - openSUSE. I also tried updating alsa following instructions given at SDB:Alsa-update - openSUSE. I'm not sure which of these changes did it, but the result is that I can no longer record ANYTHING at all. I get absolutely nothing, not even the low quality noise and crackling I was getting before. It's as if there is no audio input at all.
Uninstalling alsa-firmware and reverting back to the older alsa version (1.0.20) didn't change a thing.
I'm running openSUSE 11.2, kernel 2.6.31.14-0.6-desktop, alsa 1.0.20. My sound card is a Creative X-Fi (by the way, yast cannot detect my card, another problem I have never solved).
View 9 Replies
View Related
Jul 18, 2010
I am looking for software that will record streaming videos from places like Utube. I have one for Win but am interested to find a way in Opensuse.
View 2 Replies
View Related
Mar 25, 2011
I just buy a cheap Belson TV with recording feature on USB. I get a "ts" file, as usual. and as usual, the sound is not in sync, due to frames dropped. Last time I did so (with other hardware), I simply played the movie throuh an other recorder to get the mpg file, but now I can't anymore. So I try to find a good "ts" editor (I have a lot of unusefull video before and after the movie). Avidemux edits but do not fix the lost images/out of sync sound.
The tools mostly advertised for this use is "projectx". I have it on my openSUSE 11.3, but I fail to make it work :-(. I find no manual, except a very old (2004) one in english, and I don't read german :-(. Do you know of any english manual uptodate and understandable. projectx runs, but no of the files I get is readable by vlc or mplayer.
View 2 Replies
View Related
Apr 8, 2011
I have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
View 9 Replies
View Related
Jun 20, 2010
how to record/save logout/shutdown messages for OpenSuse 11.2.
View 9 Replies
View Related
Jan 8, 2009
I would want to record/edit/save music from the microphone (convert a tape to CD). But. I start audacity, leave everything at default, record the music, and play back. It plays agonisingly slow. I can change the sample rate manually such that it sounds good, but this is just a guess (I could for example measure the recording time, and adjust the sample rate after that, such that the displayed time on the timeline fits this time). Why the hell do I need to do this? Why is the recording sample rate = playbe sample rate not producing correct output?
View 3 Replies
View Related
Apr 8, 2010
A few days ago I setup a pc. It contains an "Intel ICH5" sound card. Before I begin posting all the configuration stuff I've tried so far what the standard procedures are to set it all up for recording the sound card output (with Audacity)?
On my older computer it all worked fine but now I only get silent recordings. However sometimes (when I played on the controls the right way...) I get recordings where you can (amoung some noise) recognize the stuff I actually wanted to record very low... Apart from Audacity I've also tried
Code:
arecord -vv -fdat audio.wav
which didn't work either. That's why I think the problem is not related to Audacity but to the system.
Is the combination of OpenSuse 11.2 + ALSA + Intel ICH5 commonly known to cause such trouble?
View 8 Replies
View Related
Dec 15, 2009
I just installed SuSE 11.2 on top of where 11.1 used to be on my hard drive. Acronis Operating System Manager will let me boot into XP Pro but it tells me it cannot find SuSE in the master boot record. If I repair the master boot record in SuSE, XP Pro disappears. What do I do?
View 1 Replies
View Related
Oct 28, 2010
I'm trying to record a video with sound through FFmpeg, and while it records the system sounds just fine, it doesn't record the microphone (in fact, it crashes on doing so!). The strange thing is that if I use arecord, it works just perfectly, but through ffmpeg it crashes.This is the command that I use to launch FFmpeg:
Code:
/usr/bin/ffmpeg
-f x11grab
[code]....
View 9 Replies
View Related
Oct 31, 2010
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies
View Related
Dec 31, 2009
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies
View Related
Jan 21, 2010
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
View 2 Replies
View Related
Feb 26, 2010
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies
View Related
Mar 5, 2010
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies
View Related
Jun 13, 2010
I setup the hostname for my linux machine to Linux. If I try ping Linux from the same computer it works. If I try from another computer inside my network the host can not be resolved. If I ping the IP from another computer it works.
I take a look in my router at DHCP client list and my linux machine doesn't have the Hostname set up.
How to broadcast the hostname to the entire network?
View 8 Replies
View Related
