OpenSUSE Multimedia :: Alsa: Cannot Record Sound
Mar 17, 2011
I've got sound - I hear all the system sounds, I can play sound files, CDs, etc. But I have not been able to record and play back anything with success.
Originally, when I would record (either with arecord or with audacity) I would get extremely low quality sound, with lots of noise and crackling, and my recorded voice was barely audible (even with volume turned up to max). I played with alsamixer for hours without being able to improve matters.
Things are worse now. I tried installing alsa-firmware, as indicated at SDB:Audio troubleshooting - openSUSE. I also tried updating alsa following instructions given at SDB:Alsa-update - openSUSE. I'm not sure which of these changes did it, but the result is that I can no longer record ANYTHING at all. I get absolutely nothing, not even the low quality noise and crackling I was getting before. It's as if there is no audio input at all.
Uninstalling alsa-firmware and reverting back to the older alsa version (1.0.20) didn't change a thing.
I'm running openSUSE 11.2, kernel 2.6.31.14-0.6-desktop, alsa 1.0.20. My sound card is a Creative X-Fi (by the way, yast cannot detect my card, another problem I have never solved).
View 9 Replies
ADVERTISEMENT
Oct 28, 2010
I'm trying to record a video with sound through FFmpeg, and while it records the system sounds just fine, it doesn't record the microphone (in fact, it crashes on doing so!). The strange thing is that if I use arecord, it works just perfectly, but through ffmpeg it crashes.This is the command that I use to launch FFmpeg:
Code:
/usr/bin/ffmpeg
-f x11grab
[code]....
View 9 Replies
View Related
Dec 2, 2009
1. I run Suse 11.2 with two sound cards , one HDA comes with motherboard and second is USB, which I use for skype and talking. In YAST everything is fine the motherboard card is marked as prime card and the usb card is marked as second. But often when I log in alsa decides that second card is main and I have to pull out the USB card, run command "rcalsasound restart" and put the USB back afterward. It is a way that to be fixed in the way that alsa remember my choices forever. 2. The other problem is that from time to time the sound suddenly dies and I have to bring it up with rcalsasound restart again.
But I have to admit that their significant improvement with managing sound with PulseAudio.
View 6 Replies
View Related
Sep 1, 2010
I have just installed OS 11.3 onto a lenovo desktop / Thinkcentre that previously had vista installed on it. With Opensuse I am having trouble getting much sound volume. With Vista the volume was fine but with Opensuse I have PCM, Master running pretty much on full. This gives me a respectable volume but I think there should really be more left in the tank from what I have it at. Is there any way to increase the gain in Alsa? The sound device shows in KDE as HDA Intel (AD198x) using xine backend.
View 8 Replies
View Related
Apr 8, 2010
A few days ago I setup a pc. It contains an "Intel ICH5" sound card. Before I begin posting all the configuration stuff I've tried so far what the standard procedures are to set it all up for recording the sound card output (with Audacity)?
On my older computer it all worked fine but now I only get silent recordings. However sometimes (when I played on the controls the right way...) I get recordings where you can (amoung some noise) recognize the stuff I actually wanted to record very low... Apart from Audacity I've also tried
Code:
arecord -vv -fdat audio.wav
which didn't work either. That's why I think the problem is not related to Audacity but to the system.
Is the combination of OpenSuse 11.2 + ALSA + Intel ICH5 commonly known to cause such trouble?
View 8 Replies
View Related
Mar 3, 2010
I have alsa 1.0.22 on my system. I can plug in my pcmcia card into my laptop, and my computer register's it, but when I plug in my microdock, alsa still thinks it's an EMU 1010, which is just the basic one, and I have a 1616, so none of my inputs register anything at all, so I can't record audio. The only thing that seems to be working perfectly or at all, are the audio jack on the pc card, the headphone jack on the microdock, and the stereo mini out for speakers on the microdock. I think it's odd that the headphone and stereo outs work on the microdock, but I can't input any audio. how to get the rest of my microdock to work?
View 2 Replies
View Related
Apr 26, 2010
could not get my sound to operate so i followed the intructions toMulti-media and Restricted Format Installation Guide - openSUSE Forumsnow i have a working audio and video player but my sound is depreciated to an almost inaudible levelwhen i try to open pulse i get connection failed:connection refusedand when i try alsa gui i get function snd_ctl_open failed for default:connection refusedcan anyone please correct this with me or for me. Noob wanting not to regret leaving windows
View 9 Replies
View Related
Jan 15, 2010
Is there any way to record audio from internal source with gtk-recordmydesktop?
View 2 Replies
View Related
Jan 20, 2010
I have upgraded from 9.04 to 9.10. Both playback and record were working using only ALSA. Karmic installed PulseAudio. Looking around the forums I found a post on how to update to the latest ALSA driver (+ lib + utils) and remove pulse to take it out of the equation. With or without pulse I cannot get record working. For work I need to use my laptop as a softphone. I've tested my headset on another machine - headphones and mic both work. Any suggestions on how to resolve this would be greatly appreciated. I have a Thinkpad T61P. Below is the output of some hopefully useful commands ...uname -aLinux moes 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
[code]....
View 1 Replies
View Related
Dec 20, 2010
I am attempting to record my microphone input using ffmpeg / alsa but always receive the following error:
[code]...
Using arecord works perfectly with hw:0,0. I had also tried to use /dev/snd/hwC0D0 as input but I receive an error from alsa saying that it doesn't exist (despite it existing and having adequate permissions). I know absolutely nothing about hardware but am comfortable around the command line
View 2 Replies
View Related
Apr 8, 2011
I have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
View 9 Replies
View Related
Nov 19, 2010
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
View 1 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Mar 15, 2010
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
View 5 Replies
View Related
May 26, 2010
I just upgraded from 8.10 to 9.04, then rapidly to 9.10, when support for 8.10 was finally phased out. I've been trying for a few days to figure out how to record sound and can't get anything working. Sound playback works fine.
Here's what I've tried so far:
Code:
The terminal programs execute and quit after ten seconds, as expected, and create a sound of the appropriate length in my home directory, which is what I want. They don't report any errors, but the sound file they create is just soft background static with occasional soft clicks. Audacity also just records soft static with soft occasional clicks. The Gnome Sound recorder does slightly better, recording almost-intelligible sounds with bad static distortion.
I've verified that sound levels are not muted using the mixer, and have run through the Comprehensive Sound Problem Solutions Guide [url]. No joy.
Here's the output of lscpi -v:
Code:
View 5 Replies
View Related
Jun 18, 2010
I am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.
Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?
View 1 Replies
View Related
Aug 24, 2010
I have Ubuntu Lucid. If i dont' mistake, it should be possible to hear several applications playing sound simultaneously, with ALSA. But if 1 app is already playing, then starting a second one give always "device is busy".
View 2 Replies
View Related
Oct 1, 2010
I recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
View 2 Replies
View Related
Nov 5, 2010
I was having a problem with ALSA, installed OSS, but now nothing works. I want to remove OSS, and reinstall ALSA. I am thinking about reinstalling, but I have all my stuff on here, so don't really want to.
View 4 Replies
View Related
Aug 19, 2010
After upgrade today, I cannot record sound. All the equipment works fine when I boot into Windoze...
Running Audacity from a terminal gives me this message as it starts:
Code:
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
Google has thrown up some old posts (some here) - none really relevant and a hint on a mailing list that it may be a bug...
Kubuntu Lucid
AMD 64 bit
AMD 8111 soundcard
View 1 Replies
View Related
Oct 7, 2010
recording defaults to my microphone but I want to record sounds directly from a application.
View 4 Replies
View Related
Nov 6, 2010
Is there currently any way to record a webcam video with sound? This used to be possible back in the day before PulseAudio was installed by default (by using Mencoder, following guides such as [URL] and [URL] ) but that method doesn't work any more: /dev/dsp doesn't exist. I've also tried Cheese and that again just records a video with no audio. All the articles I can find on the topic are from the good old pre-Pulse days.
I've tried messing about with the commands a bit to use the Alsa Pulse device (defined in /etc/asound.conf) since neither mencoder or ffmpeg seem to have built in Pulse input support:
Code:
ffmpeg -f alsa -i pulse -f video4linux2 -s 640x480 -i /dev/video0 out.mpg
- this works, but the audio is more than a second out of sync with the video, which is a bit useless (I'm trying to record myself playing guitar), and the video is very slow (<1 fps) for the first few seconds.
Code:
mencoder tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0:fps=30:forceaudio:alsa:adevice=pulse -ovc lavc -oac mp3lame -lameopts cbr:br=64:mode=3 -o test.avi
- this doesn't work, I get the following error:
[Code]...
View 1 Replies
View Related
Nov 23, 2010
I have a Asus EeePC 1001px with ubuntu 10.10 and I'm unable to record sound from the webcam microphone. Does anyone know how I can solve this?
View 3 Replies
View Related
Jun 3, 2011
Just installed Natty and always used Sound Recoder to directly record as mp3 files on previous Ubuntu versions. I forgot what you have to do to get mp3 added to the option list on Sound Recorder. Can someone tell me what has to be done so Sound Recorder will again save all my recordings as mp3 files?
View 9 Replies
View Related
Jul 14, 2011
Im trying to record sound comming from firefox, but I dont seem to be able to find a right application for that purpose..
View 9 Replies
View Related
Jul 25, 2011
I was, untill very recently, using ubuntu 10.10, and have just upgraded. In Ubuntu 10.10, I was easily able to record sound from my sound card in audacity. For whatever reason, since upgrading I have been unable to do so. I have no problem recording sound from my laptop's microphone, but can't seem to find an option to record from the sound card. I believe it's the same version of Audacity, so all I can assume is that it's an Ubuntu issue.
View 1 Replies
View Related
Dec 17, 2010
In the process of trying to get the softmodem working, I finally attached speakers to this laptop and tried to play some sounds. Nothing but silence. Both the KDE system sounds and a stand-alone player (noatun) produce nothing. No error messages that I can find, either. (That might explain why the softmodem is dead, too...) I've run alsaconf several times, and even uninstalled and reinstalled ALSA. It thinks it is working, but is not. What sorts of things do I need to check to find where it isn't working?
Info: The motherboard is a FIC 3500W with the VIA P4M800 integrated chipset. This includes the VIA 8237 sound system, which is what ALSA detects and tries to use. The machine also has a Realtek ALC655 but I don't see any drivers for that in the lsmod output, so this is a possible source of the trouble.
View 11 Replies
View Related
May 29, 2011
I decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.
Some specs :
OS version : Debian 7 (Wheezy)
Laptop brand : Packerd Bell Easynote LJ-65
Kernel installed : 2.6.38-2-686 (Standard one in wheezy)
View 4 Replies
View Related
Jul 15, 2010
So i upgraded to 10.04 a few months ago, right after it was released. clean install. it worked perfectly out of the box, or so it seemed. I had had sound problems in 9.10 that i didn't experience after i upgraded... until i tried to use some headphones a few days ago. when i connected the headphones, the speakers wouldn't mute. i thought it was no big deal. i had the same issue in 9.10 and it was fixed after i upgraded alsa. i figured i'd try the same thing. I used the same alsa upgrade script i used last time [URL] and it fixed the jack sensing and the sound worked perfectly... for about 5 minutes. after a short while of playing audio, sound would stop playing. i'd stop getting sound from video files, audio files, and even from my browser. i'd have to reboot to get sound again... only to lose it again in about 10 minutes. Now it's regressed to the point where i have no sound even after i reboot.
weird thing is, when i test out an audio file with aplay, it works... even if i just get garbage sound from some mp3 files.
anyway, i've got an HP dv7 and this is my aplay -l output
Code:
sleepee@sleepee-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
[Code].....
View 2 Replies
View Related
Aug 8, 2010
after installing alsa package, i have no sound.
View 1 Replies
View Related
