in my office we are using cyberoam firewall to manage entire network , in that lot of option is there even we can configure pptp,ipecac vpn also using cyberoam.totally cyberoam acts as a server, how can i configure ppptp vpn in centos 5 as client of the cyberoam, then only i can access the office network from my home.
View 3 Replies
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
I wanna configure openssh with key DSA, after configured in server, i can`t use PC (Window) and teraterm ssh in server
how can configure key DSA for client ?
I followed the instructions given in the link below in order to connect to a VPN server from my Ubuntu 10.04 PC.
[URL]
As mentioned in the above link,i had the system setup. I am able to connect to VPN using the default network manager that comes with Ubuntu.
But from command line, using pppd dialing,i am unable to connect to server.I get only the following messages in /var/log/messages always.
Log:
####
Oct 6 15:01:09 hari-desktop pppd[3660]: pppd 2.4.5 started by root, uid 0
Oct 6 15:01:09 hari-desktop pppd[3660]: Using interface ppp0
Oct 6 15:01:09 hari-desktop pppd[3660]: Connect: ppp0 <--> /dev/pts/5
Oct 6 15:01:10 hari-desktop pppd[3660]: Connection terminated.
[Code]....
Is there any specific VPN client using which i can establish a connection with the following information in hand ?
How do I configure vncserver to give client gmd greeter and run the gui configured in gdm?
View 1 Replies View RelatedI am using two ethernet interface, in fact one ethernet interface eth0 and other is USB netconenct ppp0. I am using fedora 12 - 32 bit. I can individually use both connections. say if I disconnect ppp0 (wvdialer), everything works fine and same in other case. Now my problem is I want torrent client to use ppp0 and all other applications like firefox and other use eth0. So that I can use both interfaces effectively.
I changed in ktorrent client's configuration, and change interface to ppp0 from all interface, but it didnt work. When my eth0 id down I can ping using ppp0, but when eth0 is also up, I can ping via eth0 but not via ppp0 (ping xxxxx -I interface). What is I am doing wrong? How can I configure torrent client to use ppp0?
How I am configure DNS Client and server in Redhat Linux 4 in my lab.I have total 5 computers and they are Lan connected.I want to make one of them server and the others are client.
View 1 Replies View RelatedI have got different clients with different SOHO routers on sites (Netgear , Linksys, SnapGear,etc.) All those clients use VPN IPSec . As you know that those routers has many entries :
Tunnel name
key lifetime
Preshared Secret
Phase 1 proposal
Phase 2 Proposal etc.
I am trying to familiarize myself to use different VPN clients (a piece of software ), that will be installed on clients, laptops to access their work network from home. I came across a problem with Cisco VPN client V5.0.06 I could not find all the above entries. I know Cisco devices are proprietary, does that mean cisco vpn client is not compatible with those router?
i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies View RelatedWhere are there good instructions to configure the DynDNS update client? It is not updating my IP number.
View 5 Replies View RelatedI am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
View 2 Replies View RelatedThis will be a little long (having read Phil's 'how to ask questions' FAQ). I'm trying to get OpenVPN working between my CentOS server and some Windoze laptops running XP. There seems to be plenty of sample
config files available, but to date, none of them have worked for me. Pulling out my trusty Wireshark, I've found some clues,
BACKGROUND:
My local subnet (NAT'ed by my gateway router) is 192.168.52.x. My router has been configured with a conduit (port-forward) for port 1194 (the standard OpenVPN port), which points towards my CentOS server.The CentOS server is .52.112, and the supplicant is .52.110. I have tried the lient both inside and outside my local subnet, with no difference in events or outcomes.
[Code]...
I've tried to read many of the topics in this forum first and tried to find a solution to my problem, but can't find one.I'm testing CentOS 5.5, it's the first time I'm using a CentOS Linux release.I'm trying to configure the proxy "client side " on it and cannot find how to do it.On other Linux release I've used the ENV variable like "http_proxy" or "HTTP_PROXY" etc etc.This time, I don't know why but it doesn't work.I've put the name and @ip of the proxy in /etc/hosts and tried different version upper/lowercase of "http_proxy" "HTTP_proxy" "ftp_pr.." but it doesn't work.If I configure manually Firefox and puting the name or @ip of the proxy we have on our network, it works.But if I try to use ENV variable it doesn't work...
View 1 Replies View RelatedI am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
im centos 5.3 At first, I used pptp-1.7.2-3.rhel5.i386.rpm from [URL]. But it didn't appear any process of install without a warning about the key problem, and I can't use rpm -e to uninstall it, I just uninstall it from xwindow. Then, I download the pptp-1.7.2-3.tar.gz from [URL] After make and make install, it appeared a problem when i do # pptpsetup --create tunnelname --server xxx.xxx.xxx.xxx --username somebody --password sercet。It told me "./pptpsetup: couldn't find MPPE support in kernel."
But im centos 5.3,and uanme -a: Linux localhost.localdomain 2.6.18-128.el5 #1 SMP Wed Jan 21 10:44:23 EST 2009 i686 i686 i386 GNU/Linux The kernal is support MPPE, and I have reinstalled the ppp-2.4.4.2-el5.rf.i386.
i have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).
View 2 Replies View RelatedI'm carrying out a project for my university (CIT in Cork, Ireland) and I'm using CentOS running over WMware. I have a server and a client. The server has no GUI (command line UI) while the client has a UI. I need to install a Simple Forum Machine application and I'm told to FTP the files into the server. I figured out that the best option is to load the files in the client via the GUI and then ftp them in the server. How do I transfer the files from a the client t o the server using FTP? I'm totally new to Linux so the more details the better. Also I'm trying to mount a USB key on the server but have had no luck.
View 2 Replies View RelatedI have Centos 5 installed on a PC in the local network. I have installed the RPM dhcpv6-client-1.0.10-16.el5.i386.rpm on this PC to configure it as DHCP V6 client. The RPM was installed successfully, and I have done modifications to the following files:
1. /etc/sysconfig/network, set the networking to yes.
2. /etc/sysconfig/network-scripts/ifcfg-eth1 set the BOOTPROTO=DHCP.
Now the problem is when I start the client on this pc as dhclient, it throws the following errors, and logs out after some time. All the network configurations were lost and the PC gets disconnected from the network.
[root@ServerB]# dhclient
Internet Systems Consortium DHCP Client V3.0.5-RedHat
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
[Code]...
I have a Lan with 100 computers with microsoft windows xp and vista on it, and I need to build a CentOS Primary domain control- PDC. So I am building a PDC , with samba 3.x +Ldap ( Light Directory Acess Protocol), with static eth0 and DHCP-server( Dynamic Host Control Protocol) on eth1.
Eth0 : 192.168.1.3
Eth1 : 192.168.1.5
Here is the configurations files:
== BEGIN uname -rmi ==
2.6.18-194.17.4.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN cat /etc/redhat-release ==
CentOS release 5.5 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Permissive
== END getenforce ==
== BEGIN rpm -q yum rpm python ==
yum-3.2.22-26.el5.centos
rpm-4.4.2.3-20.el5_5.1
python-2.4.3-27.el5
== END rpm -q yum rpm python ==
== BEGIN ifconfig -a == .....
I HAD TRIED AND COMPLETED CONFIGURING DHCP THROUGH dhcpd.conf file and now i am stucked at configuring DNS .. how to configure DNS on CENTOS.
View 2 Replies View RelatedMy office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.
View 1 Replies View RelatedI have a Centos5.4 64bit laptop, having an eth0 and a wlan0. I connect this wired eth0 to a wall socket to access Internet via DHCP (eg the assigned address is like 192.168.192.xx). I do not have access to the ADSL router. How can I turn this laptop into a Wifi access point to allow, say my Ipad or any wireless-only client, to access the Internet thru this laptop ?
That is, communication between iPad to laptop is wifi(ad-hoc connection ??), laptop to the ADSL router is wired LAN. The laptop need to have some bridging build in ? If you can refer me some concepts, then I can follow up from there.
Or better yet, has anybody does this before ?
I am bit new to Linux and have setup caching-only name server with Centos 5.5. when i do dig server, it provide resolutions. but when i use the server IP as DNS on my windows client, it says, "connection refused" on the NSlookup output. (IP table didn't enable) My server Ip is 192.168.1.253 and bellow is the configuration of "/var/named/chroot/etc/named.conf"
options {
listen-on port 53 { 127.0.0.1; 192.168.1.253; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt"; .....
how to configure DHCP server on centos linux and how to configure FTP server on centos linux
View 2 Replies View Relatedhow to configure my network for web traffic.Here is my setup:I have the following virtual machines, (all guest are running on CentOS 5.3);
firewall: Smoothwall 3.0, (hardware, not virtual)
guest # 1: Apache http server
guest # 2: Qmail server
guest # 3: Proftp server
I want all of these services on different machines for security reasons, (mainly the ftp server) how do I route the traffic from the firewall to the different machines? I have been looking at setting up a reverse proxy, however, everything that I have read says that a reverse proxy will not handle the smtp/pop3 traffic. Can I just use a DNS server to route the traffic?
I'm stuck at server with OpenNA installed, which has no relation with CentOS but If anyone knows GIPTABLES firewall to point me somewhere I can get configuring.I need to open 2 custom ports but I just can't get it to work.
View 2 Replies View Relatedi want to install and configure vpn server on centos 5.5 final i want to work it like that my server is in other city or country, i want to connect it in other city or country and want to use remote server internet on my computer.
View 1 Replies View RelatedI have centos with software firewall enable , but i want to set up hardware firewall can anybody guide how to install and configure hardware firewall in centos
View 3 Replies View Relatedi'm looking for any documents or video tutorial for How to Start VPN SERVER on Cent os 5, i'm going to make VPN accounts and set monthly bandwidth on each ,on my Server and let to client's to connect to server via VPN Connetion, such as [URL]...
View 1 Replies View Related
