CentOS 5 Networking :: Bind Server Not Responding To Client Queries

Mar 4, 2011

I am bit new to Linux and have setup caching-only name server with Centos 5.5. when i do dig server, it provide resolutions. but when i use the server IP as DNS on my windows client, it says, "connection refused" on the NSlookup output. (IP table didn't enable) My server Ip is 192.168.1.253 and bellow is the configuration of "/var/named/chroot/etc/named.conf"

options {
listen-on port 53 { 127.0.0.1; 192.168.1.253; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt"; .....

View 9 Replies


ADVERTISEMENT

Ubuntu Servers :: 10.10 - Bind 9 Not Accepting DNS Client Queries

Feb 13, 2011

However I just built a 10.10 server, installed webmin, vmware, and the server is working perfectly. I configured my bind 9 server using the latest webmin and on the server everything resolves perfectly to both the internet and lan. I have it set to 127.0.0.1, the server ip address is 10.1.50.25. However, it will not accept dns client queries in which they cannot resolve to the lan or internet. I have the dhcp giving out the dns server 10.1.50.25. NSLOOKUPS from the client show query refused. I know there has to be some setting or config that will allow clients to query but I am not able to locate it, and I am not totally knowledgeable of named.conf and been all through the webmin module and configuration settings.

View 6 Replies View Related

Server :: Named Not Responding To Queries

Feb 23, 2010

My DNS server used to work flawlessly but for some reason it no longer responds to queries. It seems that named always queries internet root serves!!

View 3 Replies View Related

Server :: BIND Refuses Queries ?

Feb 15, 2010

I am currently running the latest version of Bind, and for some completely unknown reason I can NOT get queries to work for PTR records. All queries to the servers for reverse name lookup get query denied:

Using domain server:
Name: 66.150.173.1
Address: 66.150.173.1#53
Aliases:

Host 27.173.150.66.in-addr.arpa not found: 5(REFUSED)

And it shows in my logs:

I am at my wits ends with the piece of crap. Can anyone shine some light on why this damn Bind install won't respond to these queries?

For reference here is my named.conf:

Code:

View 15 Replies View Related

CentOS 5 :: Openldap Client Won't Bind To Server

Jul 2, 2011

I can't get the client server to authenticate to the openldap server. I can authenticate on the server itself though. I can su to, login and shh into the openldap server and become a ldap user. I just can't become an ldap user on the client.I didn't setup TLS/SSL. I can do that after I have it working. I'm using hashed passwords though. I don't have replication setup. I'm am tying to setup the most basic openldap environment then build from there. I have read the openldap section in the admin guide.

My setup at home.

Openldap server � light.deathnote.net -- 10.0.1.21
client server � vm-centos01.deathnote.net � 10.0.1.7 -- VM on virtualbox
Virtualbox host � L (OS MAC) � 10.0.1.2
router (apple airport extreme) / default gatway � 10.0.1.1

All computer can reach the internet and ping each other. When I installed centos I disabled SELinux.I used these guids to setup my openldap.

[URL]

Below I have included some output from the files I'm using with openldap.

[root@vm-centos01 ~]# tail /var/log/messages
Jul 2 09:25:33 vm-centos01 xfs: nss_ldap: reconnecting to LDAP server (sleeping 16 seconds)...
Jul 2 09:25:49 vm-centos01 xfs: nss_ldap: failed to bind to LDAP server ldap://light.deathnote.net: Can't contact LDAP server
Jul 2 09:25:49 vm-centos01 xfs: nss_ldap: failed to bind to LDAP server ldap://10.0.1.21/: Can't contact LDAP server

[code]....

View 5 Replies View Related

Server :: BIND 9.5 On Fedora Core 9 Not Resolving Dns Queries

Apr 21, 2010

I have this ISP grade Nameserver running on BIND 9.5 on Fedora Core 9 64 Bit.

Its been pretty working well for sometime until a last week when we noticed it stopped resolving for our clients using on our service.

It gives correct authouritative answers for our own ISP domain with the A, PTR and MX intact but does not return resolving queries back to clients.

Below are my files

This is the message from /var/log/messages

The 41.223.x.x and 41.215.x.x ip address are from our ISP subnet and so are our own clients being denied.

The box is also hosting our traffic graph server which is on a LAMP but listens on another IP/ethernet card.

So far the load on the server is minimal as is a Dell R200 rack server.

View 11 Replies View Related

Software :: Caching-only Name Server To Forward Queries-Bind

Feb 14, 2011

I can configure a caching-only name server fine, but how do I make it forward DNS queries too?

I'm thinking I could add the below to the options stanza in the /etc/named.conf file:

View 1 Replies View Related

Red Hat / Fedora :: BIND-slow Queries Results ?

Mar 8, 2010

I have installed BIND 9.6.1-P3-RedHat-9.6.1-16.P3.fc12 on Fedora Core 12.

I found out that when i perform i DNS lookup to a some record that is not in the DNS cache or zones(means...recursive) it takes about 4 sec to give the IP results.

I dig a little bit on the internet and found out that it is a known issue but all places says that it is fixed on newer version of BIND (after version 9.3)

I tried:

1. start BIND with -4 argument ( named -4) - the server started but no changes on the delay.

2. disable IPV6 on the server - i tried the articles on the web but still i get IPV6 address.

View 7 Replies View Related

CentOS 5 Server :: Dnsmasq Starts But Doesn't Reply To Queries

Sep 5, 2010

trying to configure a Centos 5.5 server (simple file server with DHCP and DNS relay). I configured and tested the config (by 'service dnsmasq configtest') of dnsmasq and I got the message 'dnsdomain:host unknown (translation of the real message : hte inconnu) and I didn't find where I could define this host ! The hostname of the server is well defined and I can see it from all Windows PC's on the LAN. dnsmasq starts (with hte same message as in configtest) but when querying DNS from PC's te.g. trying to surf the Internet), I don't get replies (3 DNS servers are also well defined and operational).

View 2 Replies View Related

Server :: Client Computer Not Dig Bind Server?

Jul 28, 2010

I have configureed Bind in a Linux box. Well pc1 i.e "pc1.mydomain.com" is my client machine and main server is the computer in which bind is install.The client computer pc1 and the main server (Bind server) i.e FQDN "mainserver.mydomain.com "are on the same network.from client machine i can't resolve the name to IP address as my server do successfully with client. The /etc/resolv.conf file in my bind server is as

Code:
search mydomain.com
nameserver 192.168.1.254
The named.config it main configuration is as below
Code:
zone "mydomain.com" IN {

[Code]...

View 6 Replies View Related

Networking :: How To Forward All DNS Queries Through ISP DNS Server?

Jul 5, 2011

I would like configure a DNS server on Debian, only to forward through my ISP DNS servers.

View 4 Replies View Related

Fedora Networking :: DNS Queries - Connect To A Ssh Server ?

Aug 28, 2011

How often are dns queries sent? Assume I want to connect to a ssh server, will I send one dns-query in order to do that or do I send multiple during my connection? What if I request web-pages, do I send a query only when I enter a site or will I send queries every time I visit a new page on that site?

I'm asking since I'm considering getting an account at dyn.com (the standard account for $30/yr) and it comes with 600 000 queries per month (which is way more than I expect to get but knowing exactly what it means is always good).

View 3 Replies View Related

Networking :: Naming A Centos Server For A Windows Client?

Mar 12, 2011

i have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).

View 2 Replies View Related

CentOS 5 Networking :: Transfer The Files From A The Client To The Server Using FTP?

Feb 27, 2009

I'm carrying out a project for my university (CIT in Cork, Ireland) and I'm using CentOS running over WMware. I have a server and a client. The server has no GUI (command line UI) while the client has a UI. I need to install a Simple Forum Machine application and I'm told to FTP the files into the server. I figured out that the best option is to load the files in the client via the GUI and then ftp them in the server. How do I transfer the files from a the client t o the server using FTP? I'm totally new to Linux so the more details the better. Also I'm trying to mount a USB key on the server but have had no luck.

View 2 Replies View Related

Networking :: Running Foxpro On Centos ( Server ) Via Winxp Client?

Jul 30, 2010

My office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.

View 1 Replies View Related

CentOS 5 Networking :: Configure DHCP Client To Register Itself To DNS Server?

Aug 23, 2010

I'm new to CentOS and has recently use it.

I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.

View 6 Replies View Related

Networking :: Turned On Query Logging On Our Name Server And Immediately Saw Repeated Queries For?

May 14, 2010

I recently turned on query logging on our name server and immediately saw repeated queries for . (dot). I've not seen this before. It looks like a really sloppy DOS. What would this return if my NS was misconfigured?

May 13 18:11:41.710 queries: info: client 91.202.63.129#56089: query: . IN NS
May 13 18:11:42.083 queries: info: client 91.202.63.129#62826: query: . IN NS
May 13 18:11:42.788 queries: info: client 91.202.63.129#13620: query: . IN NS

[code]....

View 2 Replies View Related

CentOS 5 Server :: 5.3 Network Stops Responding?

Apr 24, 2009

after a update to 5.3 from 5.2 via the built in updater the system stops responding to visitors from the outside, http that is, but heres the odd part, if i say run firefox on the server the connection works also for some reason if i'm on the network with my own computer the connection seems to stay open but as soon as i stop using these the server seems to drop the conenctions, but as i said as soon as i go via my comp to the server via say ie it works right away.

this i tried yesterday:did a cold boot to see if some update had problems and actually needed a reboot even if the updater didn't say, after it started the connection seemed to be open for a good while, and not untill this morning from a outside source the connection is droped again, not been on my comp nor logged on on the server today yet.the install only has on it what i got from the dvd, and as far as i know it has all the updates on it since 5.3 came out.my network is built up like this:

modem
|
firewall-switch-computers

[code]....

View 19 Replies View Related

CentOS 5 :: Opening PHPMyAdmin - Server Not Responding

Sep 16, 2010

I got this error when opening phpmyadmin, I check that my mysql is keep automatic closed.
#2002 - The server is not responding (or the local MySQL server's socket is not correctly config).

View 5 Replies View Related

CentOS 5 Server :: Dovecot Postfix POP Not Responding?

Jan 2, 2011

I am running CentOS 5.2 on a server here in my home. It runs Dovecot and Postfix and also serves as a website host for a small website of mine. Everything works fine. POP, SMTP, Webmail, WWW, all works great and has for ages.Here's the issue. I recently reinstalled a clean copy of Windows 7 on a workstation in my home onto a new harddrive(I still have the old drive int he machine so I can boot to it as well). I setup the Windows Live Mail client to send/receive mail with my mail/web server. However, it won't connect to the POP server on my server machine.Here's the kicker. If I boot to the old harddrive that is running Windows 7, it connects fine to my mailserver and can send/receive just fine. I've checked, rechecked and rechecked and all mail settings on the mail clients on both drives are identical.

Note: The installations of Windows 7 on both drives is identical. Same computer name/ same credentials, same IP, etc. However, as I stated, I can send/receive email with my server if I boot to my old drive, but if I boot to my new drive, I cannot send/receive.

View 2 Replies View Related

CentOS 5 Networking :: Daemons Is Not Responding

Jun 4, 2009

The server is a Dell 1650 1U server, which a fresh install of CentOS 5.3, formatting the drive in the process. It has two e1000 NIC's and based on the wiring eth0 is the public segment and eth1 is the private segment.Both nic's make a solid 100mb connection to the cisco switch, and I can ping both interfaces "just fine".

If I run nmap on a remote PC that is also dual-homed in this fashion, I get the same response as to which ports are open (essentially everything since I disabled iptables temporarily to troubleshoot this issue) on both interfaces, which would be the expected result.But... and here is the source of my confusion... I can see the server by pinging it, I can use SSH to make such a connection and log in, but I cannot get apache to "answer the phone" so to speak.Runing "tcpdump -i eth0" shows me that my browser on a remote PC is attempting to connect, but without reply.If I send my browser to the ip address of eth1, I get the default CentOS new web server page as is the norm.Nothing shows in my /var/log/httpd/access_log or error_log at all... apache simply isn't answering.The httpd.conf is the original, and the one line I attempted to 'adjust' was the "listen 80" line, which I added the ip addresses specifically, but that didn't change anything.I am unsure how nmap can indicate the port is open and there is a service behind it, when on the same PC that ran nmap, I cannot connect at all.Might anyone have a clue to toss me so I can work to figure this out?

View 1 Replies View Related

CentOS 5 Server :: Server Goes Non Responding State?

Dec 8, 2010

5.5 (64bit). My server goes into non responding state where I can't telnet, ftp or ssh server whereas PING is the only thing which works at that time. I need to hard reboot server to get it back online. This is happening very frequently in fact yesterday and today server went inaccessible. which log file should I look into to find out the reasons of this inaccessibility?

View 2 Replies View Related

Server :: Bind Not Working In Centos?

Jul 29, 2011

i am trying to run bind in centos 6 and bind keeps giving me errors every time i check all of the configurations. the named.conf file works fine but the zone files keep giving me errors heres the contents of my named.conf file

Code:
options {
directory "/var/named";
listen-on port 53 { any; };
allow-query { any; };

[Code]....

View 4 Replies View Related

CentOS 5 Server :: Install Bind 9.7 In 5.6?

Jul 15, 2011

How to install bind 9.7 in centos 5.6 if i installed using yum means, its defaultly installing 9.3 version.

View 2 Replies View Related

CentOS 5 Server :: Bind Just Shuts Down For No Reason

Mar 30, 2010

Am running the latest CentOS5 with Bind. Bind will run for a period(time period unknown) the shutsdoown. We need to every day start the service. When the service starts there are no errors given.

View 2 Replies View Related

CentOS 5 Server :: Setting Up Bind For Web-hosting

May 4, 2010

setting up Bind for web-hosting as i am using Webmin to configure it?

View 4 Replies View Related

CentOS 5 Server :: Bind DNS Response Too Late

Aug 15, 2010

I had centos 5-5 server with 6G of RAM and 4 core cpu 3GHZ i installed bind 9.7.1-p2 on my server with multi thread support there are a lot of dns requests on my server , about 2500 Packets/sec and 3Mbit UDP traffic but my server response week to most of them.

For example when i use nslookup or dig command to query Yahoo.com the response from server maybe deliver about 5 Sec or become timed out , but sometimes response time less than 1 sec!

I don't know why, perhaps kernel works week so i decided to do the following :

But the problem didn't solved

I previously had Freebsd with same version of bind and same configuration and everything worked fine.

View 8 Replies View Related

CentOS 5 Server :: Can't Run Named When Config Bind?

Dec 20, 2010

don't find box of BIND so i was posting into this boxI have some problem when i config bind DNS for my domain and then i can't start named,this's error message

[root@server1 named]# service named restart
Stopping named: [ OK ]
Starting named:

[code]....

View 1 Replies View Related

CentOS 5 Server :: Error With New BIND Install?

Mar 11, 2011

I installed BIND 9.7.3 from source on Centos 5.5, and chrooted it, and I'm getting an error when I run 'service named status' I get a reply, but at the end it says 'named dead but pid file exists'

Here's the entire output:

[root@ns etc]# service named status
version: 9.7.3
number of zones: 23
debug level: 0
xfers running: 0
xfers deferred: 0
soa queries in progress: 0
query logging is OFF
recursive clients: 0/0/1000
tcp clients: 0/100
server is up and running named dead but pid file exists Nothing is logged in /var/log/messages. Named is running and responding correctly. How can I get rid of this error?

View 5 Replies View Related

CentOS 5 Server :: IP Is Working But Not Its Fqdn In Bind

Apr 30, 2011

i have xp and virtual guest centos 5.i install apache, bind, squid and webmin through xp, i can access URL...but when i start my squid, put the ip in the browser proxy settings, when i logon its ip turn to URL...I believe my bind is working. Though theres some little glitch. I dont know where.and i already put my servers bind ip to my winxp primary dns server settings.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved