How I am configure DNS Client and server in Redhat Linux 4 in my lab.I have total 5 computers and they are Lan connected.I want to make one of them server and the others are client.
View 1 RepliesHow to configure sftp in RHEL3 or RHEL4
View 3 Replies View RelatedI have HPDX2480 computer system where i have installed RHEL4u5 having kernal 2.6.9-55. now how can i install and configure my NIC?
View 1 Replies View Relatedi hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies View RelatedI'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
i want to know how to configure my sql server and clients in debian 5. what should be the server host name and root password
View 1 Replies View Relatedi am pursuing rhce... i amn't get the concept of yum..
View 1 Replies View RelatedI have using ubuntu nis server (LTS 8.04.1) and all nis client fedora 6,7,8,9 its working fine yesterday I installed new client os fedora 11 and configure nis client I started ypbind service can't start I did client configuration.
1. /etc/sysconfig/network add NISDOMAIN=TEST
2. /etc/sysconfig/authconfig UseNIS=yes
3./etc/nsswith.conf
passwd: files nis
shadow: files nis
group: files nis
4. /etc/yp.conf
Add nisdomain and ypserver name
After I stop ip6tables and iptable and network Manager
Shutting down NIS service: [FAILED]
Starting NIS service: [ OK ]
Binding NIS service: ....................... [FAILED]
I'm a newbie to Linux and need some help in DHCP client configuration.
I'm trying to find a way to set hostname at the start up and get the DHCP client to register itself after it received an IP address.
I want to know the steps for configuring YUM both on server and client side.
View 2 Replies View RelatedI have configured the postix email server in Centos. Its working fine with Squirrel mail client. But If I configured in microsoft Outlook. it is working. with this post I have attached the error message. Please let me know solution.I am getting this error message while I check the SMTP authentication in outgoing server tab on outlook account setting configuration.If I send any email It will bounce and came to to inbox
View 1 Replies View RelatedI am using two ethernet interface, in fact one ethernet interface eth0 and other is USB netconenct ppp0. I am using fedora 12 - 32 bit. I can individually use both connections. say if I disconnect ppp0 (wvdialer), everything works fine and same in other case. Now my problem is I want torrent client to use ppp0 and all other applications like firefox and other use eth0. So that I can use both interfaces effectively.
I changed in ktorrent client's configuration, and change interface to ppp0 from all interface, but it didnt work. When my eth0 id down I can ping using ppp0, but when eth0 is also up, I can ping via eth0 but not via ppp0 (ping xxxxx -I interface). What is I am doing wrong? How can I configure torrent client to use ppp0?
I have got different clients with different SOHO routers on sites (Netgear , Linksys, SnapGear,etc.) All those clients use VPN IPSec . As you know that those routers has many entries :
Tunnel name
key lifetime
Preshared Secret
Phase 1 proposal
Phase 2 Proposal etc.
I am trying to familiarize myself to use different VPN clients (a piece of software ), that will be installed on clients, laptops to access their work network from home. I came across a problem with Cisco VPN client V5.0.06 I could not find all the above entries. I know Cisco devices are proprietary, does that mean cisco vpn client is not compatible with those router?
in my office we are using cyberoam firewall to manage entire network , in that lot of option is there even we can configure pptp,ipecac vpn also using cyberoam.totally cyberoam acts as a server, how can i configure ppptp vpn in centos 5 as client of the cyberoam, then only i can access the office network from my home.
View 3 Replies View RelatedI am trying to install and configure LTSP on a server for a HP thin client to boot off. The version of Ubuntu that I am using is 11.04 x86 and it is a fresh install on a dual core system with 2GB RAM. I followed a guide which comprised of these commands.
sudo apt-get install ltsp-server-standalone openssh-server sudo ltsp-build-client or if your on a 64-bit system with 32-bit machines do sudo ltsp-build-client arch i386 for editing the servers IP values use /etc/ltsp/dhcpd.conf after that you need to restart DHCP server sudo /etc/init.d/dhcp3-server restart
and update sshkeys -sudo ltsp-update-sshkeys and if you updated dhcpd.conf then you need to update you image also by typing in terminal ltsp-update-image
Everything seemed to install as it should but when I try to boot from the thin client it just times out and says no DHCP or proxy invites received. I turned DHCP off on the router and even tried another router, but I still get nothing. I am at a bit of a loose end and I hope someone on here can point me in the right direction of where I am going wrong.
Where are there good instructions to configure the DynDNS update client? It is not updating my IP number.
View 5 Replies View RelatedI am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
View 2 Replies View RelatedI am trying to configure mutt to send email via command line . It works fine when I configure it for gmail as follows:Quote:
# SENDING MAIL
set copy=yes
set smtp_url = "smtp://mymail@smtp.gmail.com:587/"
[code]...
I was installed xming application on windows XP & Windows 7to access Linux server's GUI session and i was able to access it using root account but when ever iam trying to access GUI using normal account it is giving some error.I am testing this since it is a freeware.
View 7 Replies View RelatedWe have done an installation on a blade server (HP) for RHEL4.5.
The server have an HP smart array 2200 controller and during installation it can see the controller and disks just fine.
The installation completes up to the point where the system needs to reboot , however after the reboot it does not start up again and get stuck at the message: "Trying to boot from drive c:"
We used the rescue option to mount the installation and cant find nythign wrong, even with the grub setup (except that it points to hd96 as its primary disk). we tried changing this to hd0 as well but still no luck.
After about 3 installations we are still not having any luck.
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I am developing a some application which running on rhel4 os. And its functions will handle via the web application. So we have provided an option to login (via vnc)to the server on web application when we need. so how we can enable vnc for a session (like 30 minit)? I'm using default vnc installation while installing rhel 4 nothing more installed by downloading. When I click session button on web page, I execute this command from my code
"service vncserver start"
then I can access server via vnc but when I click on disable button on web page, I execute this command from my code
"service vncserver stop"
but still I can login to server via vnc
i am configuring a web server with multiple virtual host on RHEL4 AS but i m getting no error except the following one.but when i browse the web site it does not work even
Starting httpd: [Sun Jun 13 05:53:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
my httpd.conf file is as follow
Use name-based virtual hosting.
#
NameVirtualHost *:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier
[code]....
I've been trying to track this kernel panic down for the last few days on this system... I believe it might be autofs/nfs related, but I'm not 100% sure.
Here is the dump in /var/log/messages:
I installed very old the rhel package Apache Tomcat/5.5.20. I want to update it 5.5.33 or Tomcat6. Do you have the update for redhat?
View 1 Replies View RelatedI have 2 ethernet cards but when I look at the Network configuration in "Hardware Tab" I have another acx wireless network. How to delete that because In my system Idon't have wireless card..probably installed before but want delete it now.
[code]...
then windows can ping server and resolve ip address and browsing Internet but can't ping [URL]... result is Request time out. ICMP already enabled in iptables.
I want to install the wireless lan driver in rhel4. I searched for the driver in internet, i got only Realtek rtl8185_linux_26.1031.1207.2009.release.tar.gz, how to install it in RHEL4.
View 1 Replies View Relatedi have RHEL4. i m facing problem that all the previous command history is deleted when i restart the server or relogin the server. it is happening with all the users not with any one user.
View 2 Replies View RelatedI have created a website in php.wamp server is used to run the site.i created the database in phpmyadmin using mysql.These all were done in windowsXP.Now I want to import it into redhat linux system.how can I import database and its tables to rhel4 inorder to working the website properly
View 7 Replies View Related