CentOS 5 Networking :: Can't Install Pptp Client
Sep 2, 2009
im centos 5.3 At first, I used pptp-1.7.2-3.rhel5.i386.rpm from [URL]. But it didn't appear any process of install without a warning about the key problem, and I can't use rpm -e to uninstall it, I just uninstall it from xwindow. Then, I download the pptp-1.7.2-3.tar.gz from [URL] After make and make install, it appeared a problem when i do # pptpsetup --create tunnelname --server xxx.xxx.xxx.xxx --username somebody --password sercet。It told me "./pptpsetup: couldn't find MPPE support in kernel."
But im centos 5.3,and uanme -a: Linux localhost.localdomain 2.6.18-128.el5 #1 SMP Wed Jan 21 10:44:23 EST 2009 i686 i686 i386 GNU/Linux The kernal is support MPPE, and I have reinstalled the ppp-2.4.4.2-el5.rf.i386.
View 5 Replies
ADVERTISEMENT
Sep 17, 2009
I'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.
I've checked iptables. There were initially some issues. I've fixed those.
Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:
Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....
View 1 Replies
View Related
Jun 29, 2011
I am trying to connect my pptp client Linux to a pptp Linux server using modem but no success. I can only tweak ppp linux side Observing the following log I found it�s due to MPPE Support configuration mismatch in pppd, pppd (linux client) is refusing to accept MPPE encryption.
pppd[24545]: pppd 2.4.5 started by root, uid 0
chat[24547]: abort on (NO CARRIER)
chat[24547]: abort on (NO DIALTONE)
chat[24547]: abort on (ERROR)
chat[24547]: abort on (NO ANSWER)
chat[24547]: abort on (BUSY)
[Code]....
View 1 Replies
View Related
Feb 1, 2011
I'm trying to setup IPv6 in a PPTP client configuration on Maverick, but in network manager only IPv4 is available.
On LAN and WLAN IPv6 is working fine but I want to avoid when using a VPN all IPv6 connection are bypassing the VPN which compromises the VPN to a certain extent ..
View 6 Replies
View Related
Sep 24, 2010
i have installed Linux i.e ubuntu 10.04 on my PC in which i have installed pptp client and able to connect it successfully but problem is that it unable to browse internet. in windows it works fine.
View 1 Replies
View Related
Jun 13, 2011
I have got pptpd linux server and pptp linux client which connects successfully. Now I want setup idle time (inactive) in pptp linux client so that if the pptp tunnel is inactive say for example 5 minutes it will be automatically disconnected. how can do that, is there any built in feature on pptp client?
View 1 Replies
View Related
Oct 31, 2010
1st, i managed to make a VPN connection to my server and after a reboot i get this:I've tried everything that google gives me with "ubuntu vpn service failed to start pptp" search terms.2nd, I've got a DSL connection (PPPoE) to the internet. When i connect it, eth0 looses it's ipv4 ip (I've disabled ipv6). How can I keep it?
View 1 Replies
View Related
Oct 27, 2010
I've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0.
My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
[Code]....
View 2 Replies
View Related
Jan 7, 2011
I am trying to connect to a PPTP VPN at work, and I cannot accomplish that. Both server and client are using Ubuntu 10.10.
Code:
Jan 7 11:32:26 multicore-dev03 NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
[code]....
View 9 Replies
View Related
Mar 13, 2010
i have a VPN server PPTPD on Centos 5.3
eth0: 62.2.2.x (public on the internet)
GW: 62.2.2.1 (cisco router)
i want to configure my ppptp server to allow users access internet with their own public ips of class 62.2.3.0 62.2.4.0 62.2.5.0
every time i configure my server all users can get thier IPs but they only go out with my server IP same as NAT not routing.
can you show me the proper configuration to make my users connect with public IP and have internet access. use specific DNS ( i did this but some users can not brows by DNS)
is there any way to specify an expired date for each pptp user.
View 1 Replies
View Related
Jul 16, 2011
I can't get the CentOS version of pptpd to work. I have a Debian 6 one with the exact same setup that does work. The required port is open according to various external port checking websites. It's giving me random errors when trying to connect, including 800, 809, 619. This is what I did so far;
Step 1. Installing pptpd the pptpd is the daemon that runs the pptp server.
To install this:
Step2. Next you will need to modify the pptpd.conf
Step 3. The vpn server is now configured and now you must setup authenticated users:
Step 4. When pptpd was installed it started automatically so we will need to restart it to apply the changes:
Now, if you would like to add internet access over this vpn, you can do this:
And find the line for ipv4 forwarding and make sure it = 1:
Then use iptables to get the net forwarded:
View 1 Replies
View Related
Oct 6, 2009
I am a newcommer to Centos. I should connect to internet via a pptp vpn connection. I created the connection in "network connections". In other distrows I could connect to created pptp vpn connection simply by clicking on network-manager-applet and selecting the connection, but there is no network-manager-applet in Centos. Is there any way to connect to the vpn connection I created or I should go to do it by manually editing config files?
View 3 Replies
View Related
Sep 15, 2010
I successfully installed openvpn and networkmanager openvpn plugin. Then I successfully added a PPTP vpn connection by networkmanager vpn tab which name is "vpn1". But now I don't know how to connect to this PPTP vpn connection. I tried bellow command but no luck.
openvpn --config vpn1.config
View 3 Replies
View Related
Jul 26, 2011
I installed Fedora Linux and I am using GNOME. I've created a vpn connection and is connected to the server without problem (Please see attached photos); But after being connected, Upon opening the site ,Vpn will automatically disconnect.
View 1 Replies
View Related
Apr 11, 2011
I just installed ubuntu 9.10 but there isn`t pptp VPN on Network manager. How can I install its packages?? I dont have any internet access on my linux because the only way to connecting to the internet is pptp VPN for me.
View 1 Replies
View Related
Mar 12, 2010
i can't install network-manager-pptp package with offline.i get this package from Code:http://packages.ubuntu.com/karmic/i386/network-manager-pptp/downloadJust now i use ubuntu9.10.
View 3 Replies
View Related
Jun 27, 2009
This will be a little long (having read Phil's 'how to ask questions' FAQ). I'm trying to get OpenVPN working between my CentOS server and some Windoze laptops running XP. There seems to be plenty of sample
config files available, but to date, none of them have worked for me. Pulling out my trusty Wireshark, I've found some clues,
BACKGROUND:
My local subnet (NAT'ed by my gateway router) is 192.168.52.x. My router has been configured with a conduit (port-forward) for port 1194 (the standard OpenVPN port), which points towards my CentOS server.The CentOS server is .52.112, and the supplicant is .52.110. I have tried the lient both inside and outside my local subnet, with no difference in events or outcomes.
[Code]...
View 2 Replies
View Related
Oct 4, 2010
I've tried to read many of the topics in this forum first and tried to find a solution to my problem, but can't find one.I'm testing CentOS 5.5, it's the first time I'm using a CentOS Linux release.I'm trying to configure the proxy "client side " on it and cannot find how to do it.On other Linux release I've used the ENV variable like "http_proxy" or "HTTP_PROXY" etc etc.This time, I don't know why but it doesn't work.I've put the name and @ip of the proxy in /etc/hosts and tried different version upper/lowercase of "http_proxy" "HTTP_proxy" "ftp_pr.." but it doesn't work.If I configure manually Firefox and puting the name or @ip of the proxy we have on our network, it works.But if I try to use ENV variable it doesn't work...
View 1 Replies
View Related
Mar 9, 2011
I need to configure Point to point tunnel protocol (PPTP) vpn in centos.
In Windows XP:
We can able to configure PPTP Vpn like this.
" 1. Open the Windows Control Panel.
2. Open the Network Connections item in Control Panel. A list of existing dial-up and LAN connections will appear.
3. Choose the 'Create a new connection' item from the left-hand side of the window. The Windows XP New Connection Wizard will appear on the screen.
4. First click Next to begin the wizard, then choose the 'Connect to the network at my workplace' item from the list and click Next.
5. On the Network Connection page of the wizard, choose the 'Virtual Private Network connection' option and click Next.
6. Enter a name for the new VPN connection in the 'Company Name' field and click Next. The name chosen need not match the name of an actual business.
7. Choose an option on the 'Public Network' screen and click Next. The default option, 'Automatically dial this initial connection' can be used if the VPN connection will always be initiated when the computer is not already connected to the Internet. Otherwise, choose the 'Do not dial the initial connection' option. This option requires that the public Internet connection be established first, before this new VPN connection will be initiated.
8. Enter the name or IP address of the VPN remote access server to connect to, and click Next. Company network administrators will provide this information.
9. Choose an option on the "Connection Availability" screen and click Next. The default option, 'My Use Only,' ensures that Windows will make this new connection available only to the currently logged on user. Otherwise, choose the 'Anyone's use' option.
10. Click Finish to complete the wizard. The new VPN connection information has been saved."
But in Centos how we can able to configure PPTP VPN for this we need to install any package. I got all the vpn access credentials from my office to work from home, but i cant able to join in my office network. because of this prob.
iam using : CentOS release 5.4 (Final) versing os
View 3 Replies
View Related
Nov 21, 2010
I have a problem about installing DHCPv6 on CentOS . I have 2 machines,a machine is DHCPv6 server and another is DHCPv6 client,they are in the same network.I configure 2 machines as the following link :[URL]
But,the client machine doesn't get a ipv6 from server.
View 1 Replies
View Related
Sep 23, 2010
does anybody have a nice tutorial about creating and installing Apache client certificate (PKCS12) ? I`m looking for some tutorials to CentOS. This what I have found on the internet for some reasons doesnt work. Or maybe somebody could write here how to do it?
View 1 Replies
View Related
Mar 12, 2011
i have a centos 5.5 server running tomcat,oracle xe,apache etc..i would like to be able my windows machine to access this server by name, and not ip, for example have http://backserv:7080 for oracle xe web admin and so on..i know one way is DNS, but if i install oracle on a windows machine in peer-to-peer network, i can allready access with by it's name. o i'm guessing i should do something with samba, wins or something like that.never mind i got now for the REAL complex stuff of insalling web sphere 7 without user interface (need to look for a response file).
View 2 Replies
View Related
Oct 14, 2010
in my office we are using cyberoam firewall to manage entire network , in that lot of option is there even we can configure pptp,ipecac vpn also using cyberoam.totally cyberoam acts as a server, how can i configure ppptp vpn in centos 5 as client of the cyberoam, then only i can access the office network from my home.
View 3 Replies
View Related
Feb 27, 2009
I'm carrying out a project for my university (CIT in Cork, Ireland) and I'm using CentOS running over WMware. I have a server and a client. The server has no GUI (command line UI) while the client has a UI. I need to install a Simple Forum Machine application and I'm told to FTP the files into the server. I figured out that the best option is to load the files in the client via the GUI and then ftp them in the server. How do I transfer the files from a the client t o the server using FTP? I'm totally new to Linux so the more details the better. Also I'm trying to mount a USB key on the server but have had no luck.
View 2 Replies
View Related
Jul 23, 2009
I have Centos 5 installed on a PC in the local network. I have installed the RPM dhcpv6-client-1.0.10-16.el5.i386.rpm on this PC to configure it as DHCP V6 client. The RPM was installed successfully, and I have done modifications to the following files:
1. /etc/sysconfig/network, set the networking to yes.
2. /etc/sysconfig/network-scripts/ifcfg-eth1 set the BOOTPROTO=DHCP.
Now the problem is when I start the client on this pc as dhclient, it throws the following errors, and logs out after some time. All the network configurations were lost and the PC gets disconnected from the network.
[root@ServerB]# dhclient
Internet Systems Consortium DHCP Client V3.0.5-RedHat
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
[Code]...
View 4 Replies
View Related
Nov 24, 2010
I have a Lan with 100 computers with microsoft windows xp and vista on it, and I need to build a CentOS Primary domain control- PDC. So I am building a PDC , with samba 3.x +Ldap ( Light Directory Acess Protocol), with static eth0 and DHCP-server( Dynamic Host Control Protocol) on eth1.
Eth0 : 192.168.1.3
Eth1 : 192.168.1.5
Here is the configurations files:
== BEGIN uname -rmi ==
2.6.18-194.17.4.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN cat /etc/redhat-release ==
CentOS release 5.5 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Permissive
== END getenforce ==
== BEGIN rpm -q yum rpm python ==
yum-3.2.22-26.el5.centos
rpm-4.4.2.3-20.el5_5.1
python-2.4.3-27.el5
== END rpm -q yum rpm python ==
== BEGIN ifconfig -a == .....
View 3 Replies
View Related
Jul 30, 2010
My office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.
View 1 Replies
View Related
Jul 27, 2010
I have a Centos5.4 64bit laptop, having an eth0 and a wlan0. I connect this wired eth0 to a wall socket to access Internet via DHCP (eg the assigned address is like 192.168.192.xx). I do not have access to the ADSL router. How can I turn this laptop into a Wifi access point to allow, say my Ipad or any wireless-only client, to access the Internet thru this laptop ?
That is, communication between iPad to laptop is wifi(ad-hoc connection ??), laptop to the ADSL router is wired LAN. The laptop need to have some bridging build in ? If you can refer me some concepts, then I can follow up from there.
Or better yet, has anybody does this before ?
View 4 Replies
View Related
Aug 23, 2010
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
View 6 Replies
View Related
Mar 4, 2011
I am bit new to Linux and have setup caching-only name server with Centos 5.5. when i do dig server, it provide resolutions. but when i use the server IP as DNS on my windows client, it says, "connection refused" on the NSlookup output. (IP table didn't enable) My server Ip is 192.168.1.253 and bellow is the configuration of "/var/named/chroot/etc/named.conf"
options {
listen-on port 53 { 127.0.0.1; 192.168.1.253; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt"; .....
View 9 Replies
View Related
