Networking :: Samba Setup - Windows 7 Host - CentOS Machine Using VirtualBox?
Jun 23, 2010
I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines? Please note: I am very inexperienced in the IT field. [URL]...
View 2 Replies
ADVERTISEMENT
Jun 23, 2010
I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines?
[URL]
View 1 Replies
View Related
Aug 18, 2010
What is the best way to share files in virtualbox between host/machine I thought of trying usb but the devices are all greyed out. I know the fix for this but I have to search for it, permission problem I think? Or is there a more elegant way
View 4 Replies
View Related
Feb 11, 2009
I installed Tomcat5.5.23 on CentOS5.2 running on Sun xVM Virtual Box2.1.2. When i try to view Tomcat( Running in Vitual Centos)'s home page in the web browser of Host( XP sp2) am getting the "Connection Time out" error.. How to resolve this problem.
View 2 Replies
View Related
Mar 15, 2011
I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
View 1 Replies
View Related
Feb 13, 2010
I have Linux installed on one machine with samba running and a second machine running XP. They are going through my router and I am using the same username/passwords for both machines and I have even gone to the point of allowing access to everyone for the share I created and the worgroup in samba is MSHOME just like my XP machine. When I view (or search) my workgroup computers my Linux machine shows up and so do the shares I created but when I try to open them I just get a message that permission is denied and I may not have permission to use this resource. I even tried setting access to the shared folder to 777 but still I can't open this share. Has anyone got any idea of why this is?
View 3 Replies
View Related
Feb 13, 2011
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies
View Related
Aug 8, 2010
Our company uses a customized vpnc (based on and almost the same as vpnc 0.5.3). I first tested it on a Windows host under Virtualbox everything works straight away. But when I want to use it on a Linux host directly it always ends in "No response from target". I have tested this on Fedora 12 and the latest Ubuntu.
I thought of firewall settings but iptables -L on Ubuntu returns an empty list even.
View 2 Replies
View Related
May 10, 2010
Can anyone point me in the direction of setting up shares for windows machines on centos. I have found a few document but never managed to get it up and running correctly. I need to be able to get access to subfolder etc for different users. Is there any way of doing it with some sort of gui?
View 2 Replies
View Related
Oct 20, 2010
I have found that there are certain things on the web that I need to print, that simply refuse to work under linux. I have a samba printer server on one of my Slackware boxes and an M$ XP vm under Vbox that can access the server and see the printer. The only problem that I have is that it expects to download a driver from the server which isn't available and the HP driver installer won't install if it doesn't detect the printer. Short of relocating the printer to install the driver, does anyone know how to get the driver installed on the XP host? This is so much easier with my Slack boxes and CUPS!
View 2 Replies
View Related
Jul 6, 2011
but is there any thing i need to make sure on the domain controller for me to be able to join the domain with a linux machine alright?
View 2 Replies
View Related
Jul 31, 2009
I have a running PDC with Samba and LDAP. But when I want to join the Domain with an XP Pro Client I just get following error message.
"A Device connected to the System is not working".
View 4 Replies
View Related
Oct 31, 2009
I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
View 14 Replies
View Related
Dec 17, 2010
I have setuped OpenLDAP+Samba PDC. When I create user and group -> Errors.
smbldap-group -a admin
No such object at /usr/sbin/smbldap_tools.pm line 457
smbldap-useradd -am -g admin admin
Could not find base dn, to get next uidNumber at /usr/sbin/smbldap_tools.pm line 1192
View 3 Replies
View Related
Jun 6, 2010
I am trying to see share files on my windows machine to my linux machine. I would like an answer to how to fix the problem. This is where i am at i am using my own network to learn who to use nmap properly. I ping my whole network with nmap -sS -O. Then i used nmblookup -a which gave me the infromation i needed. Then i run smbclient -L computername -I ip address -N
This will not show me the windows os this only show me my laptop. What can i change for this to show me the other computer on this network. The port i am wanting is open. I want to be able to mount the share files and move them to my computer i am going to use the commands put and get to move the files when i am able to get to the smb: >
[Code]...
View 6 Replies
View Related
Jul 15, 2011
I am unable to access samba share from my windows machine. I am getting the following error
View 9 Replies
View Related
Mar 8, 2011
I have ubunto desktop 10.04 LTS I installed samba and able to access the share on windows machines. However i want to access the share on 300 windows machine(for example) systems at a time Is it possible.
View 5 Replies
View Related
Jun 27, 2011
Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
View 3 Replies
View Related
May 17, 2010
Should I use XEN or VirtualBox to host linux on windows 7 or windows 7 on linux? Since I've read about the problems of reading/writing NTFS disks with linux usnig the Linux NTFS driver, I thought it would be better to host windows on linux. I think the problem is that you never can be sure if the linux NTFS driver is going to corrupt your disk because Microsoft does not publish the format for linux developers.
By running windows on linux, I could read and write EXT3 from windows. I think there are EXT3 drivers for windows. Then I got to thinking: If I am running Linux on Windows, am I going to be using SAMBA or the linux NTFS driver? I think I'm going to be using SAMBA to read and write the linux partitions -- correct? Are there other considerations when deciding to host linux on windows or windows on linux? I'm going to using both the linux and windows partitions for software development with java/eclipse and various databases including oracle.
View 2 Replies
View Related
Jun 2, 2011
My goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
View 3 Replies
View Related
Jun 1, 2011
Come back to forum after long gap, after using Ubuntu for the last few years i finally move to fedora again with Fedora 15. I like this version of Fedora, it's clean & simple. But i'm having few problems as well. I want to share some folder of my fedora machine with a windows machine of my home, so that my younger brother can access those folders from his windows machine & copy files to his computer. for this i need to setup samba, i already install samba related packages. but can't start system-config-samba from Application Menu. When i go to start this, it asking for authentication & after giving password nothing happend at all! i try to start this from Command line with-
[Code]....
at present, i can browse shared folders from other machine of my home network, but my fedora machine is absent in list of machines, so my brother can't access shared folders of my machine. how can i setup samba share in my fedora machine? so that i can easily share folders with other machine just like ubuntu.
View 14 Replies
View Related
Apr 15, 2010
I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.
View 9 Replies
View Related
Apr 30, 2009
I have set up a Samba share via my CentOS 5 server (the samba share is actually a mounted filesystem, not local machine space). I have been successful in adding permissions for my windows users within the smb.conf, but have an additional need that I cannot figure out. I would like for my Windows administrators to be able to create folders and assign permissions from their machines (and their Windows GUI). Ultimately I need the folders on the Samba share to behave correctly when Windows group permissions are applied by these administrators.
When the folders are created, the "Everyone" identity cannot be deleted and sometimes "Creator Owner" or "Creater Group" show up. I have seen several threads start down this path, but haven't seen a definite answer (I may have just missed it!).
View 1 Replies
View Related
Sep 9, 2010
My boss is asking me if there is any way to run a full version of Ubuntu from a flash drive without installing virtualbox/vmware on a windows host. I've been searching pendrivelinux.com and really haven't found anything. Can someone point me in the right direction?
View 6 Replies
View Related
Nov 12, 2009
I have just started a job as an IT tech, and have inherited a linux server running CEntOS 5.3 -- I have some experiance with linux, but am a little at sea. I'm using Webmin 1.490.The main use of the server is to samba share file space to windows clients, running XP.Everyone can happily connect to their home share, however the other shares have problems. One of the shares "staff" fails intermittently (to some staff members) and some of the other shares fail always.
The failure is that when a user tries to connect to the share, it pops up a username and password dialog (even if they just successfully viewed their home dir) then on entering correct details and clicking ok, the box refreshes with <domain><user name> (where braced values are replaced by literal values). If a user is connecting from outside via vpn (hosted though a different department's server) the domain is replaced by their computer name.If the password is re-entered, the same happens, in an infinite loop, and no access is ever given.When I say the staff share is intermittent, there likely is some pattern, but I haven't been able to work it out yet -- I think it may have something to do with how recently the account was set up, or physical location.
View 3 Replies
View Related
Jul 8, 2009
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
View 1 Replies
View Related
Mar 10, 2009
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
View 2 Replies
View Related
Oct 15, 2010
I am trying to config linux box as router.
I have CentOS 5.5 client and host in VBox. I can't connect them (I am using bridge adapter mode) as I don't have router in between.
I just created DHCPD on host, and followed
[URL]
But that don't seem to work also. Host is 192.168.1.10 and client is 192.168.1.100 but when I ping host from client, it says Destination host unreachable.
View 2 Replies
View Related
May 29, 2010
I can set-up an ssh tunnel from machine A to Machine B:-
fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com
I can successfully logon to machine A to Machine B.
what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.
View 5 Replies
View Related
Jun 6, 2011
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
View 3 Replies
View Related
