Ubuntu Networking :: Samba - Share Files From Windows Machine
Jun 6, 2010
I am trying to see share files on my windows machine to my linux machine. I would like an answer to how to fix the problem. This is where i am at i am using my own network to learn who to use nmap properly. I ping my whole network with nmap -sS -O. Then i used nmblookup -a which gave me the infromation i needed. Then i run smbclient -L computername -I ip address -N
This will not show me the windows os this only show me my laptop. What can i change for this to show me the other computer on this network. The port i am wanting is open. I want to be able to mount the share files and move them to my computer i am going to use the commands put and get to move the files when i am able to get to the smb: >
I have Linux installed on one machine with samba running and a second machine running XP. They are going through my router and I am using the same username/passwords for both machines and I have even gone to the point of allowing access to everyone for the share I created and the worgroup in samba is MSHOME just like my XP machine. When I view (or search) my workgroup computers my Linux machine shows up and so do the shares I created but when I try to open them I just get a message that permission is denied and I may not have permission to use this resource. I even tried setting access to the shared folder to 777 but still I can't open this share. Has anyone got any idea of why this is?
I have ubunto desktop 10.04 LTS I installed samba and able to access the share on windows machines. However i want to access the share on 300 windows machine(for example) systems at a time Is it possible.
I am trying to share files between my Windows XP machine and ubuntu server. I set up and configured samba following the instructions in the Online Ubuntu Server Guide. [URL] This is the abbreviated version of my smb.conf file here.
[global] workgroup = HOME server string = %h server interfaces = 127.0.0.0/8, 192.168.1.101/24 # map to guest = Bad User
I'm trying to make my music directory, located on my Ubuntu box, available to all the windows clients (Windows 7, to be specific) located around the apartment. It seems to work fine, I can see and read from the shares from my windows box, but deleting files doesn't work, I just get a permission denied.I've tried being as lenient as I can in the smb.conf, as well as setting 777 on the affected files, nothing changes. I've read, from my various googling, that the octal file permissions aren't as important as the samba permissions. Okay fine, but how do I tell samba to ignore permissions and let everyone delete files? I've read that samba works with samba users, but again, I don't care about users, I just want a global share that anyone can connect to and read (and delete) files.
Here's my smb.conf file: http:[url]...As you can see, I've played around a bit with options, but I just can't seem to get anything to work.
I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
I'm running kernel release 2.6.26-2-686 on a i686 and are trying to share files between my machine and some Windows 95/98 machines. When I enter smb://ip_number/share_name in Nautilus, it works. I can browse the files. When I try the same with smbclient or smbmount, it complains.
smbclient -I=ip_number -L=//server/share gives cli_rpc_pipe_open: cli_nt_create failed on pipe srvsvc to machine tf_calibration. Error was ERRSRV - ERRerror (Non-specific error code.)
I need a command-line method of copying files from a Linux box to a Windows machine that is in a domain and requires authentication. I cannot install additional software or services on the Windows XP machine. I can install any software on the Linux machine. I've tried scp, but the connection failed and if my understanding is correct it is because scp requires that the target (windows machine) be running an ssh service. Is there a command-line linux utility that can pass Windows domain user and password and then copy a file from the linux machine to a share on the windows machine?
I have a Win7 deskptop (host) and want to run a linux virtual machine; but I want that linux virtual machine to be able to access a directory on the host machine (in this case, to serve a web directory).
What virtual machine software would you recommend for this?
What is the best way to share files in virtualbox between host/machine I thought of trying usb but the devices are all greyed out. I know the fix for this but I have to search for it, permission problem I think? Or is there a more elegant way
I have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
I'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
I get:
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2] tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
I am running Ubuntu 9.10 on my desktop right now. I have an external western digital terabyte drive plugged into it. I am able to see it and view it fine. Let's work with my music folder for example. I want to be able to access this music from my Windows 7 laptop so that I may add it to my itunes. However, when I enter the \servershare from the windows 7 laptop it says that the "server" is found but the "share" seems to be invalid. I've checked this 20 times and setting the share name to "music". I've rebooted 2 times on each computer yet to no avail. If I make a share on the Ubuntu desktop I can access it from the laptop. So it seems like it just gets lost when looking inside the external. This was just working last week, then I had to blow away they win 7 lappy and now it just won't work!
I recently replaced my windows fileserver with one running Ubuntu. One thing I've noticed (which is a annoying) is that when I copy files between two samba shares from my windows machine, it copies the file through my PC to the new destination. On windows shares it just did some sort of local copy (ie it took about 2 seconds) rather than 3-4 minutes. Is this the normal behaviour, is there any way around it on Linux
I am trying to create a Samba share on Ubuntu so that I can see it on my Windows computer but have had nothing but trouble. I've tried everything that I could find in Google but the best I can get is that my Ubuntu computer shows up as Unknown device on my Windows computer. Unfortunately, my Windows computer belongs to my company or I would just switch to Ubuntu altogether. I have posted a couple of screenshots of what I see in Windows, my GParted partitions, and the options that I have enabled for the folder I am trying to share. Below are my fstab and my samba files from Ubuntu. I am sure that this is just some rookie mistake as I am new to Ubuntu. It certainly seems that this should be easy, but I just can't get it.
My server info: SUSE 11.3 , authenticated against LDAP, I am able to log in using LDAP credentials. I did run smbpasswd -w password
After I configured the smb.conf file, I try to do this on the Terminal to make sure it will work in Windows machines but I got this error:
user@mybox:~> smbclient -L mybox.mydomain.com Enter user's password: (I enter the user password here) Connection to mybox.mydomain.com failed (Error NT_STATUS_CONNECTION_REFUSED)
so I went to /var/log/samba.log to check the error file, I got this :
Connection to LDAP server failed for the 1 try! [2010/12/10 18:08:50.919813, 1] lib/smbldap.c:1330(another_ldap_try) Connection to LDAP server failed for the 2 try! [2010/12/10 18:08:52.133624, 1] lib/smbldap.c:1330(another_ldap_try) Connection to LDAP server failed for the 3 try!
and it kept going on and on until I stop it.
Here is my smb.conf file, please take a look to see what I've done wrong here. I tried to to take out WORKGROUP in GLOBAL but there were error like " Work group name x.x.x.com is too long, so I put in WORKGROUP = etc.
[global] workgroup = mybox passdb backend = ldapsam:ldap://ldap.my domain.com:11389/ ldap suffix = dc=my domain,dc=com name resolve order = wins bcast hosts ldap machine suffix = ou=Computers ldap user suffix = ou=People ldap group suffix = ou=Groups ldap admin dn = "cn=sambaLabs2,ou=roles,dc=domain name,dc=com" ldap ssl = start tls server string = "my File Server" security = user log file = /var/log/samba.log log level = 1 Max log size = 50 wins support = yes wins server = my wins servers here winbind enum users = no winbind enum groups = no unix extensions = no wide links = yes hosts deny = ALL hosts allow = 192.168. interfaces = lo eth0 bind interfaces only = true browseable = No read only = No usershare allow guests = No
load printers = yes printing = cups printcap name = cups printcap cache time = 750 cups options = raw map to guest = Bad User
[homes] comment = home directories browseable = No valid users = %S read only = No writable = yes create mask = 0660 directory mask = 0770 inherit acls = Yes inherit permissions = yes
he moved in a new place and there is a huge share on the network machine which runs windows... however he has fedora 10 installed on a desktop pc with a big screen and asked me to configure it so it can access the share... i have almost no experience with fedora and i've been trying to do this for two days now... i installed the samba package, but now what? how to do this because the exact commands are unknown to me... i have the root password and everything else on the network... so i just need to know what ot write in order to be able to mount all the TBs of information on the server...
I'm giving up in ever hoping that I'll get printing working with windows 7 with the strange comments I've found on the net. Basically I have a samsung ML2240 printer shared on the network, everything can print to it fine except for my windows 7 laptop. It's shared via Samba.
Quote:
Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher] ps5ui.dll pscript.hlp pscript.ntf pscript5.dll
However after checking this, I dont have the files named within int he correct folder on my windows system :
%WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for 64-bit drivers.I've tried installing the printer via the windows installer, however this adds the driver then tells me its not working and fails to print. I really dont know where to turn with this one. I've tried installing the samsung supplied drivers from the website. However they still fail to connect.
ubuntu 9.04 and win xppro i've been pounding my head aganst this for hours now. reading anything i can find samba works mostly shares created from nautilus work fine from both ubuntu and windows if i check to allow guest access if not i can not log in it does work in the nautilus browser fine. shouldn't make a difference but am using a virtualbox win xp guest shares work without issue. printers work here is a dump of my service defenitions
[global] workgroup = HOME server string = %h server (Samba, Ubuntu) map to guest = Bad User
I have a linux box that I'm using to mount a windows 7 share with samba or cifs. The mounting itself goes fine, but directories with more subdirs or files do not seem to have all the content they actually have.
For example, viewing my music folder shows only first 37 subdirs. The ls says "total 49", which is the correct amount, but the listing itself shows only 37 first in alphapetical order.
On the other hand, my wallpaper folder contains 122 files. Ls claims there is 41872 and displays only 70.
Adding the mount option noserverino increases the listed files or dirs, but it still does not show them all.
I've tried to enable debug printk level, but dmesg doesn't show anything interesting.
I've tried to change values in /proc/fs/cifs, but it does not seem to have any effect.
I've tried changing samba package. So far I've tested with 3.5.7, 3.5.2, 3.5.4 and now 3.5.8.
My distribution was yesterday slackware 13.1. Today I upgraded to 13.37 (with samba 3.5.8) but the problem persists.
I've tried with kernel versions 2.6.35.12, 2.6.38.2 and 2.6.37.6.
I have set up a Samba share via my CentOS 5 server (the samba share is actually a mounted filesystem, not local machine space). I have been successful in adding permissions for my windows users within the smb.conf, but have an additional need that I cannot figure out. I would like for my Windows administrators to be able to create folders and assign permissions from their machines (and their Windows GUI). Ultimately I need the folders on the Samba share to behave correctly when Windows group permissions are applied by these administrators.
When the folders are created, the "Everyone" identity cannot be deleted and sometimes "Creator Owner" or "Creater Group" show up. I have seen several threads start down this path, but haven't seen a definite answer (I may have just missed it!).
I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
I'm running Lucid and and trying to get Samba set up to allow sharing files on my network. My problem is that my Windows laptop (Win7) can't see the Linux PC when I click on Network. It only shows my own laptop and my roommate's Vista laptop. However, if I manually connect to the computer (\serenity) it works just fine.
Right now I'm simply using the smb.conf that comes with the package and adding my share info.
The file permissions on the folder are RW for user,group and world.(umask=0000) My main problem is with SELinux, I've tried to audit2allow and that seemed to work, all I had to do then was chcon the directory and files to type samba_share_t but the tool fails with Operation Not Supported. Am I to assume you simply cannot share files from a mounted ntfs drive under SELinux? Because I've just spent 2 hours trying and I've just about ready to just give up and just go back to windows when I need to share those folders. There's no way i can copy the folder contents to my Linux partition, far too big for that. Has anyone EVER been able to do this? Do I have to disable SELinux to do it?
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
