CentOS 5 Server :: Installed CentOS 5.3 On A Machine, And Need A Samba Version 3.2 Or Higher?
Jul 8, 2009
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
I installed centos 5.3. gcc and g++ versions are 4.1.2 20080704 (Red Hat 4.1.2-44).How to install a second compiler gcc and g++ of version 4.2 or higher so that both versions of gcc and g++ are available?
Can anyone point me in the direction of setting up shares for windows machines on centos. I have found a few document but never managed to get it up and running correctly. I need to be able to get access to subfolder etc for different users. Is there any way of doing it with some sort of gui?
I have installed CentOS 5.5 along with the Samba package. I have it configured (i believe), but when I try to access a share, it is not accepting my UN/PW. I have copied the smb.conf file from a working computer over to this one, but it is still not accepting my login. Anyone know of any other files I should check?
I have moved a working smb.conf file to this new box, and both computers have the same UN/PW's
I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines?
I just installed VMware server 2.02 on a CentOS 5.4 machine. I tried to run 'vmware': it starts via my web browser (firefox) with xdg-open. Then, firefox displays this:
Connection Interrupted
The connection to the server was reset while the page was loading. The network link was interrupted while negotiating a connection. try again.
I'm quite new to Linux/CentOS. I installed LAMP from official CentOS repositories and I'm wondering why the PHP (5.1.6) or MySQL (5.0.77) versions are so old. Why there is now the latest versions available.
Is it recommended to use these versions or should I update to the newest one - if so could you plesae provide me some links to official repositories&tutorials.
Many here know I distribute alot of live stuff and thus many say I should try to putout as high a kernel version as possible for wireless, netbooks, etc.my questions are about using a much higher kernel version than the installed headers for instance; I use kernel 2.6.34-ZEN in my arch/slackware builds but the slackware version contains headers 2.6.33.4 from slackware and so is that a problem or no?I built the kernel from source using headers 2.6.33.4 in slackware and headers 2.6.34 in arch...now, I may be upgrading those kernels to meerkats 2.6.35-r5 and need to know if having headers 2.6.33.4 is an issue?also, after compiling kernel does it install a new set of headers when you do make modules_install?
We are wavering between a CentOS 5.4 installation (64-bit) and a CentOS 4.x installation (32-bit). Our software is happier with a 32-bit installation, but I wonder if our 64-bit box will have a problem. Can you tell by looking at the data below?
I have the following version of centos,kerbose and samba (Samba version 3.0.33-3.29.el5_5.1, krb5-libs-1.6.1-36.el5_5.5 , krb5-workstation-1.6.1-36.el5_5.5 , centos-release-5-5.el5.centos) i have configured it and qhw i givit give me the following error Failed to set password for machine account NT_STATUS_ACCESS_DENIED) Failed to join domain: Access denied
I am having trouble logging into a newly installed CentOS 5.3 box. I can SSH into the machine with root but can not do so with any normal users. I get the error, "connection refused." My firewall is currently turned off.
I have CentOS 5.5 installed on my Dell D600. This release includes SAMBA 3.0. Question: Is there a way to use yum to upgrade / install the latest version of SAMBA (3.5.3)?
A "yum search samba" shows there is only the "samba3x" release available - which is SAMBA 3.0
I've downloaded the SAMBA3-3.5.3-43.el5.i386.rpm package for Cent OS 5 from the SAMBA.org site, but when I try to install it, it fails due to package dependencies.
Short of downloading the source and compiling it myself, is there a better method to get the latest version of SAMBA installed on my system?
I have a running PDC with Samba and LDAP. But when I want to join the Domain with an XP Pro Client I just get following error message. "A Device connected to the System is not working".
I run a bunch of CentOS 5.6 servers, where we continuously deploy our software. Our software comes in self-made rpm packages from a network-local yum repository. As bugs happen in software development, I sometimes want to downgrade to the previous release, so force the installation of a specific version of the package.I tried the allow-downgrade plugin, but so far no luck. Neither yum update nor yum install seem to work with allow-downgrade. (It does not seem to do anything?). Does anyone have a working example for yum --allow-downgrade?
This is what I tried: 1) Show current yum version [root]# yum --version
I am trying to use the ksctp on CentOS 5 newly installed machine. However, I am not able to find some files (/usr/include/netinet/sctp/h, libsctp.so etc.,) that are required for compiling my application.
I have Linux installed on one machine with samba running and a second machine running XP. They are going through my router and I am using the same username/passwords for both machines and I have even gone to the point of allowing access to everyone for the share I created and the worgroup in samba is MSHOME just like my XP machine. When I view (or search) my workgroup computers my Linux machine shows up and so do the shares I created but when I try to open them I just get a message that permission is denied and I may not have permission to use this resource. I even tried setting access to the shared folder to 777 but still I can't open this share. Has anyone got any idea of why this is?
I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines? Please note: I am very inexperienced in the IT field. [URL]...
I have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
Maybe this should be asked on the hplip website somewhere but I will ask it here. I am running CentOS 5.3 x86_64. The latest rpm version of hplip which I can find, and which is installed, is 1.67 but I need at least version 2.84 of hplip for my printer, an OfficeJet j6480.
Has anyone installed hplip version 2.84 or later for an x86_64 system ? Do either the hplip-2.8.4.run or hplip-2.8.4.tar.gz installation methods install hplip 2.84 for an x86_64 system, as opposed to just an x86 system ? Has anyone produced on he web somewhere a 2.84 or later hplip rpm for x86_64 that I can use rather try to figure out how to do it myself ?
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
When I installed CentOS on a 64 bit machine, I selected the 64 bit option. However, for some reason it installed many i386 packages - these were exact duplicates of installed x86_64 packages.Is this typical? How do I prevent this on future installs? If I left them installed, could this have caused a problem in the future? Due to my fastidious nature, I used yum extender to uncheck every duplicate i386 package and uninstalled them. This took some time. I am still not proficient with yum directly so I am wondering if there is a command to uninstall all i386 packages quickly.
I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
=============================================================== [2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42) INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
we are planning to migrate from RHEL 4 to higher version. Latest RHEL available is RHEL 5.5 and also RHEL 6 BETA is released which will soon available for production.
I have a perfectly functional Samba file and print server. I will be adding several Window 2008 servers to serve as terminal server hosts running in virtual machines. I would like to convert my Samba server to a PDC (Primary Domain Controller) for these terminal servers to use. And leave everyone else as a work group (the current situation). I'd like to
1) use /etc/password and /etc/samba/smbpasswd as the source of the user accounts
2) limit what users the terminal servers can see based on a particular group (/etc/group)
So far I have tried the example howto's on the samba site and wound up having to restore /etc/nsswitch.conf in rescue mode.
I have re-installed our operating system (CentOS 5) ,what is the best way to restore our Samba server? Can it be as simple as copying the smb.config and smbpasswd files back into the /etc/samba directory? That's what I am hoping. If I just copy the smb.config and the smbpasswd files back to the samba directory will the machine trusts, users and passwords just work? If not, what is the proper procedure for restoring. Actually i want to make CentOS 5.3 as my Domain Controller, I want to test all Scenario in case of any disaster of DC before putting it into production environment. I have some queries as:
1. Is CentOS 5 is more stable than RHEL 5 etc.
2. How can i take back up of entire samba server if need it in case of any disaster. How can i restore it.
3. How can i use logon scripts like GPO in windows servers.
4. How can add users in samba server and linux at one time with one command.
5. tell me any Web based samba administration tool other than SWAT.
I'm planning to use a virtual CentOS box for web development (to use the same software as on the real server). I configured Samba to have root guest access to /var/www/ but it doesn't let me in /var. Chmod 777 doesn't help. Nethertheless, I have full access to /sbin and /etc.
I'm having problems using Samba+winbind 3.3.8 as a fileserver on a Win2008 domain. - getent and wbinfo are reporting correct information about users. - Ownership of file created from user using the samba mount are working fine. However, my groups directories are allowing people who shouldn't .. From the shell everything is working as expected, but not from samba..
