Server :: Configure NIS Client - Cannot Communicate With YPbind
Jun 16, 2009
I have using ubuntu nis server (LTS 8.04.1) and all nis client fedora 6,7,8,9 its working fine yesterday I installed new client os fedora 11 and configure nis client I started ypbind service can't start I did client configuration.
1. /etc/sysconfig/network add NISDOMAIN=TEST
2. /etc/sysconfig/authconfig UseNIS=yes
3./etc/nsswith.conf
passwd: files nis
shadow: files nis
group: files nis
4. /etc/yp.conf
Add nisdomain and ypserver name
After I stop ip6tables and iptable and network Manager
Shutting down NIS service: [FAILED]
Starting NIS service: [ OK ]
Binding NIS service: ....................... [FAILED]
View 1 Replies
ADVERTISEMENT
Jan 26, 2009
After updates and restart of debian server, my NIS is not functioning. No yptools are working, it cannot find the server. All my commands I issue on the NIS server. When I issue the command yptest, I get:
>>
century4:~# yptest
Test 1: domainname
Configured domainname is "cga.lan"
Test 2: ypbind
Can't communicate with ypbind
century4:~#
<<
rpcinfo gives:
>>
century4:~# rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100004 2 udp 899 ypserv
100004 1 udp 899 ypserv
100004 2 tcp 902 ypserv
100004 1 tcp 902 ypserv
100009 1 udp 901 yppasswdd
600100069 1 udp 904 fypxfrd
600100069 1 tcp 906 fypxfrd
100007 2 udp 913 ypbind
100007 1 udp 913 ypbind
100007 2 tcp 916 ypbind
100007 1 tcp 916 ypbind
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 udp 32795 nlockmgr
100021 3 udp 32795 nlockmgr
100021 4 udp 32795 nlockmgr
100021 1 tcp 59990 nlockmgr
100021 3 tcp 59990 nlockmgr
100021 4 tcp 59990 nlockmgr
100005 1 udp 894 mountd
100005 1 tcp 897 mountd
100005 2 udp 894 mountd
100005 2 tcp 897 mountd
100005 3 udp 894 mountd
100005 3 tcp 897 mountd
100024 1 udp 32797 status
100024 1 tcp 59863 status
century4:~#
View 3 Replies
View Related
Apr 6, 2010
I am trying to set up an NIS client on a Fedora Core 12 64-bit system. The ypbind daemon is running via the /etc/init.d/ypbind script. However, whenever I run the ypwhich command, the following error message appears on-screen:
[code]...
The client has been configured so the domain is set, and the client will broadcast for the first available nis server. The client is on a subnet where there is one nis slave server, so it should bind to that server. One thought that came to mind was the fact the client in question is 64-bit, while the nis slave is 32-bit. Could that cause this problem?
View 4 Replies
View Related
Mar 25, 2010
Problem: This morning, our NIS master server down (due to ram prob), and what happen is all the sun servers able to bind to NIS Slave, able to communicate to other sun and windows servers but not Linux servers.
Detailed Problem: sun_server[sab]% rsh linux01 o_ypcall: clnt_call: RPC: Unable to receive; errno = No route to host sun_server[sab]% telnet linux01
Trying 10.x.x.x...
Connected to linux01.
Escape character is '^]'.
[Code]...
View 1 Replies
View Related
Jun 13, 2009
i want to know how to configure my sql server and clients in debian 5. what should be the server host name and root password
View 1 Replies
View Related
Aug 5, 2010
i am pursuing rhce... i amn't get the concept of yum..
View 1 Replies
View Related
Jul 5, 2009
How I am configure DNS Client and server in Redhat Linux 4 in my lab.I have total 5 computers and they are Lan connected.I want to make one of them server and the others are client.
View 1 Replies
View Related
Aug 23, 2010
I'm a newbie to Linux and need some help in DHCP client configuration.
I'm trying to find a way to set hostname at the start up and get the DHCP client to register itself after it received an IP address.
View 2 Replies
View Related
Mar 21, 2010
I want to know the steps for configuring YUM both on server and client side.
View 2 Replies
View Related
Nov 1, 2010
i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies
View Related
May 28, 2011
I have configured the postix email server in Centos. Its working fine with Squirrel mail client. But If I configured in microsoft Outlook. it is working. with this post I have attached the error message. Please let me know solution.I am getting this error message while I check the SMTP authentication in outgoing server tab on outlook account setting configuration.If I send any email It will bounce and came to to inbox
View 1 Replies
View Related
Aug 23, 2010
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
View 6 Replies
View Related
Jul 22, 2011
I am trying to install and configure LTSP on a server for a HP thin client to boot off. The version of Ubuntu that I am using is 11.04 x86 and it is a fresh install on a dual core system with 2GB RAM. I followed a guide which comprised of these commands.
sudo apt-get install ltsp-server-standalone openssh-server sudo ltsp-build-client or if your on a 64-bit system with 32-bit machines do sudo ltsp-build-client arch i386 for editing the servers IP values use /etc/ltsp/dhcpd.conf after that you need to restart DHCP server sudo /etc/init.d/dhcp3-server restart
and update sshkeys -sudo ltsp-update-sshkeys and if you updated dhcpd.conf then you need to update you image also by typing in terminal ltsp-update-image
Everything seemed to install as it should but when I try to boot from the thin client it just times out and says no DHCP or proxy invites received. I turned DHCP off on the router and even tried another router, but I still get nothing. I am at a bit of a loose end and I hope someone on here can point me in the right direction of where I am going wrong.
View 1 Replies
View Related
Oct 2, 2010
I am trying to set up a website from my ubuntu machine through IIS of windows server 2003. I am sharing the folder I want to store the files in across the network and all the computers are seeing it find.
The question is, how do I do this so it does not require a password to connect to it or give windows the permission without having to put them in every time.
I can get to my website, but it is asking for username and pass... I need that gone.
View 4 Replies
View Related
Jan 9, 2011
I am trying to configure mutt to send email via command line . It works fine when I configure it for gmail as follows:Quote:
# SENDING MAIL
set copy=yes
set smtp_url = "smtp://mymail@smtp.gmail.com:587/"
[code]...
View 14 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Dec 15, 2010
This issue was prompted by Groupwise MTA not communicating with a Post Office that I had migrated to our first Linux box. I found out why, because I cannot communicate with it at all, other than through ethernet. I'm not sure what the problem is. I've checked the firewall and opened up all the ports that I'm trying to communicate on.ve made sure Apache is loaded
View 2 Replies
View Related
Jun 11, 2011
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
View 6 Replies
View Related
Mar 8, 2010
I want to create a simple website which can communicate with unix server.For example i want to run some command on a unix server through a website.
View 10 Replies
View Related
Sep 14, 2010
I am trying to setup the "NIS" server in my server . But I am not able to start the "ypbind" service. May I know anything wrong in my configuration?
( 1 ) type "system-config-authentication"
( 2 ) tick on "NIS" Support and key in "RHCE" as NIS Domain and "IP_Address" ( My test computer IP Address , is it correct to use my server IP address ? )
( 3 ) click OK twice.
( 4 ) I received the following error message.
[root@server ~]# system-config-authentication
Stopping portmap: [ OK ]
Starting portmap: [ OK ]
not registered: 100000 2 tcp 111 portmapper
[code]....
View 2 Replies
View Related
Aug 11, 2011
I'm building a lab of fedora 14 machines that are supported by an RHEL/CentOS 5.6 server. Everything was working fine yesterday, but today ypbind can't connect to the server and nfs mounts fail with this message:
mount.nfs: mount(2): Operation not permitted
mount.nfs: trying text-based options 'addr=10.9.1.6'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: portmap query failed: RPC: Remote system error - No route to host
I can ping the server from the client using FQDN and ip address.
View 8 Replies
View Related
Nov 2, 2010
i need to set up a cvs client, i have never done this before. In the how to's that i have found i see always explanations on setting up the server. Can somebody post a small tutorial on how to set up only the cvs client?
P.S. Connection to the server will be made using SSH and a set of keys. In windows i use WinCVS without problems but i never had to set up a client in linux.
View 1 Replies
View Related
Aug 13, 2009
I wanna configure openssh with key DSA, after configured in server, i can`t use PC (Window) and teraterm ssh in server
how can configure key DSA for client ?
View 1 Replies
View Related
May 16, 2010
I am running Ubuntu Server Lucid 64bit on an AMD-based system and Ubuntu Server Lucid x86 on a dual P4 HP Netserver. I have a Trust PW-4120M UPS plugged into the AMD box via a serial cable.I have installed nut on both systems from the repositories (with "apt-get instal nut") and configured the AMD system as follows:
#ups.conf
[trustups]
driver = megatec
[code]....
I've tried every adjustment to the config files I can think of but without success. I'm guessing this is a permissions issue but I've been unable to find any info on this after extensive searching of Google. As far as I can tell (ie. I've not installed one!) there's no firewall operating on either machine.
View 2 Replies
View Related
Aug 13, 2010
I'm trying to configure in fedora 13 a dhcp client that would request IP address on my finished DHCP test server.
I've already configured dhcp on eth0 on the client machine,
here is the configuration on my DHCP test server
default-lease-time 600;
max-lease-time 7200;
ddns-update-style none;
authoritative;
option domain-name "sample.testnet.com";
[Code]....
View 7 Replies
View Related
Oct 10, 2010
We have several FC machines (from 6 to 12) that use an OpenLDAP server running on Centos 5.4 for authentication. I have now tried setting up a FC13 workstation. I notice that the authentication GUI has changed and wants me to use Kerberos or a TLS enabled server. Is there a way to get FC13 to behave like FC12 in this respect. Or (less desirable) what changes do I have to make to the server to accommodate FC13?
The workstation knows who the users are, but will not authenticate if they try and log in.
[URL]
but it didn't work for me
View 11 Replies
View Related
Jun 30, 2010
I am using two ethernet interface, in fact one ethernet interface eth0 and other is USB netconenct ppp0. I am using fedora 12 - 32 bit. I can individually use both connections. say if I disconnect ppp0 (wvdialer), everything works fine and same in other case. Now my problem is I want torrent client to use ppp0 and all other applications like firefox and other use eth0. So that I can use both interfaces effectively.
I changed in ktorrent client's configuration, and change interface to ppp0 from all interface, but it didnt work. When my eth0 id down I can ping using ppp0, but when eth0 is also up, I can ping via eth0 but not via ppp0 (ping xxxxx -I interface). What is I am doing wrong? How can I configure torrent client to use ppp0?
View 3 Replies
View Related
May 29, 2009
I'm new LDAP kind of stuff.I want to configure LDAP server and Client on windowsXP. could you tell me which Open source LDAP Server and client are best fit for windowsXP. Is OpenLdap not suitable for windows?
View 8 Replies
View Related
Jan 18, 2011
I am trying to configure ldap logins on a fc14 client to authenticate via a suse linux enterprise server 10 ldap server.
I can login with clients running on all opensuse versions as well as mint, ubuntu,etc. Just can't get fc14 to authenticate.
I have tried [URL] with no luck.
View 3 Replies
View Related
Apr 28, 2010
I am installed Opensuse 11.2 and maked all configurations and installations for Mail Server Yast. ( Postfix, Ldap ) In ldapadmin what class objects i need insert to configure e-mail client ? I am choised for test suseMailAccess and in suseMailClient inserted my e-mail and what i insert in suseMailAction ? Anyhere know howto install and configure this service ?
View 5 Replies
View Related
