Server :: LDAP Server Vs Client / Export Server's Home Directory To The Client?

Jun 11, 2011

I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....

Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....

what need to be done on the client and server side.

View 6 Replies


ADVERTISEMENT

Server :: Openldap Client Fails To Connect Ldap Server 'ldap_bind - Can't Contact LDAP Server

Sep 28, 2010

Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.

Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:

ldapsrv is pingable:

Some outputs:

PHP Code:

PHP Code:

View 20 Replies View Related

Server :: NFS Export Mounts On Client But Normal Users Can't Get Into The Directory

Jul 1, 2010

I have set up an NFS server on Fedora 13, and I am connecting to it with Fedora 13 and Ubuntu 10.

On both clients the command

Code:

works fine. On Fedora I can get into the directory with Nautilus and have read/write permissions as specified in /etc/exports on the server, but on Ubuntu I can only get into it from a sudo'd command line.

The ownership of the file on Fedora is "nobody" and on Ubuntu it's "user #500", with only people in the "500" group having access to it.

Obviously the permissions can't be changed on the client, but with the Fedora box being able to read/write to it with no problems I'm not sure what else I can do on the server to let normal users on the Ubuntu box read it.

View 1 Replies View Related

Ubuntu Servers :: Server 10.04 As LDAP Client Of Active Directory?

Nov 19, 2010

(This was posted at the end of another thread, where it probably didn't belong, so reposting here)I have Active Directory set up on one machine (and I can't really adjust the settings very much) and Ubuntu Server 10.04, which I would like to use as a client.I followed the directions at https://help.ubuntu.com/community/LD...Authentication, but when I get to

Code:
getent passwd
I don't see anything from the LDAP, and ssh'ing into the box from an LDAP/AD username certainly doesn't work.

In addition, I've attempted to use Webmin's LDAP Configuration module to configure it. I can connect to the server and can browse it with the LDAP browser with my settings, but the Webmin package doesn't recognize the users (which are organized in one of four Organizational Units (OUs) within the OU that I have as my Search Base) as users,

View 1 Replies View Related

Server :: Alternate Home Directory On NIS Client

Dec 6, 2010

I have an NFS mount on the NIS client that I want to use as the home directory for all NIS users logging in, but I also want to retain the original /home directory for system users and root on the same client.The NFS mount is /nishome, and when I defined the NIS user on the the NIS server, I identified this mountpoint as the NIS users' home directory. This same NFS mount is mounted on the NIS server as well.

View 4 Replies View Related

Red Hat :: Configuring Ldap Client / Getting "error Ldap_sasl_bind: Can't Contact LDAP Server?

Mar 13, 2010

i have configured ldapserver on rhel4 for creating address book

following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema

i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.

but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"

also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.

View 3 Replies View Related

Server :: Config Ldap Client To Direct Its Authentication To Slave Ldap?

Apr 5, 2010

i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap

here is my config file on ldap client (i am not sure if it is the right place though)

ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....

View 11 Replies View Related

Server :: Adding New User In LDAP Client

May 2, 2010

I am facing problem in adding new users in ldap server and client for a long time. I configure ldap server and client successfully and I can login the client machine by a user. User is created on server during configuring the server but after same time when I create a new user on server and create a home dir for the same user on client machine and assign 700 permission on home dir of same user and copy the /etc/skel/.* /home/user-dir and when run the command "#chown -R user:users /home/user" it shows invalid user error.

View 1 Replies View Related

General :: Root Mismatch Between Server And Client In LDAP?

Jan 27, 2010

I have a server and a few clients set up with LDAP and NFS. All user files and logins are on the server, and I can login as a normal user on any client and get to my files. However, if I log in as root on a client, I can't write in root-owned directories on the NFS. I suppose that client-root and server-root are different.

Question: is there some way to convince the LDAP or that client-root and server-root are the same?

View 3 Replies View Related

Server :: Ldap Client Ubuntu 8.04 Password Unchanged?

Apr 15, 2010

I am getting a problem that whenever I loged in with my ldap user on a ldap client and try to change the password of ldap user it doesn't allow me to do so...

azizf@pc:~$ passwd
passwd: User not known to the underlying authentication module
passwd: password unchanged
azizf@pc:~$

[Code]..

View 14 Replies View Related

Server :: How Do A User Can Change Its LDAP Password On Client Machine

Jun 5, 2009

I have configured LDAP Server on RHEL 5.2 successfully and client can login to the server. But I do no how a client can change its LDAP password on his client machine.

View 5 Replies View Related

Networking :: Winbindd Run On Box Client On Network With Samba Ldap Server Configured As PDC?

Oct 28, 2010

Does winbindd must run on linux box client on network with samba ldap server configured as PDC.

View 5 Replies View Related

Ubuntu :: Configuring 9.10 As Client To Use Samba/LDAP Server For User Authentication?

Jan 18, 2010

how to make a new Ubuntu 9.10 box use our LDAP/Samba server for user authentication. Our Red Hat and Windows machines all use it just fine. I've been trying to use the auth-client-config and libnss-ldap packages for this purpose, but I must be missing something. I'm pretty green with LDAP, so this is my first time diving in... Is there a good How-To or step-by-step read on this? All of my searches lead me to setting up Ubuntu as the server, and that isn't what I want. I've also tried the steps listed in [URL] for the LDAP Authentication section.

View 1 Replies View Related

CentOS 5 Server :: Ldap - Ldapsearch And Getent Works From Client But Cannot Login

Jan 26, 2009

So I've configured ldap on Centos5 64 bit and I can run "ldap search" and "gentent passwd" on the client/server and it shows my users info.

But I can't login via the cli or GUI.

I can login by doing;

su - username

at the client or server but I can't login by issuing;

login username

or at the GUI login screen.

View 2 Replies View Related

CentOS 5 Server :: LDAP Client - Nss_ldap: - Authenticate SSH And Sudo And Not Services Like Httpd - Nrpe - Xinetd

Aug 9, 2011

When ever I have an issue with our LDAP server (which I was able to fix) we see the following errors in /var/log/messages and it causes problems with our services running on that box, e.g. httpd, nrpe, xinetd, etc. Aug 8 17:44:42 hostname httpd: nss_ldap: failed to bind to LDAP server ldap://serveraddress/: Can't contact LDAP server Aug 8 17:44:42 hostname httpd: nss_ldap: reconnecting to LDAP server (sleeping 64 seconds)... I am only wanting to authenticate SSH and Sudo and not services like httpd, nrpe, xinetd etc.

View 2 Replies View Related

Server :: Nis Client On Centos Not Working With Suse Server / But Works With Suse Nis Client

Jun 25, 2009

I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??

View 2 Replies View Related

Fedora Networking :: Home Network - Setup One As Server And The Others As Client

Mar 29, 2009

how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.

View 2 Replies View Related

Debian Configuration :: Installed Nfs-kernel-server On The Server And Nfs-common On The Client?

May 3, 2011

I have installed nfs-kernel-server on the server and nfs-common on the client. Assumeserver 192.168.1.1client 192.168.1.3

content of /etc/exports is:
/home 192.168.1.0/255.255.255.0(rw,sync,no_root_squash)
/home/nfsroot 192.168.1.0/255.255.255.0(rw,no_subtree_check,async,no_root_squash)

[code]....

View 4 Replies View Related

OpenSUSE :: FIrewall Setup / Client Computer Cannot See NFS Server When Scanning For Server - OSE 11.2?

Apr 21, 2010

I have a small home-office network. On that network I have two linux computers, one is a client the other a server.

On the server I have NFS Server setup and mount some NFS exports on the client computer.

On the server I have the firewall on and here it becomes a little tricky.

Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.

The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.

However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.

The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.

The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.

In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.

So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.

Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.

Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....

View 6 Replies View Related

Server :: Calling Remote Apps On Windows Server From 'buntu' Client

Apr 23, 2010

My desktop is running 'buntu 9.10 and I have recently aquired a couple of half decent servers running Windows server 2003. I have a few windows app's that I use regularly for work that I have had limited success in running with wine or in vm's. I stumbled upon a how to to call apps in a vm to run seamlessly on the host desktop and did some playing and have succeeded in calling app's on my servers from my 'buntu desktop, the command I have set in my launcher for one of them (DIALux)

My question is, can I change the default application/file association in 'buntu with a custom command so I can double click on a file and have it open in one of these remote app's??If I can, what is the correct custom command to be using as using the above doesn't work at all, it just tries to open the file with rdesktop not the remote app.

View 1 Replies View Related

Server :: CentOS /Samba Server- XP Windows Client File Sharing?

Nov 3, 2009

I have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss

View 7 Replies View Related

Server :: Run An Openvpn Server On A Openvz VPS - Packets Doesn't Reach The Client

Oct 23, 2010

I'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.

what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian

View 9 Replies View Related

Ubuntu :: Terminal Server Client And Server 2008?

May 18, 2010

I love Ubuntu and last night I wiped crappy windows 7 off my laptop and installed and customised a beautiful Ubuntu 9 OS ( I tried the new 10.04 first but it had some issues for me ). Now, up here at work we got a Domain Controller that is running windows server 2008, I need to be able to RDP into it and mess with it, I tried to use the Terminal Server Client that comes with Ubuntu, and I can see the login screen just fine, but when I try to log in it says incorrect password and wont go through.

Just to make sure it was not my account that was the issue, I went to my boss and used his computer (a MAC running OSX) and I was able to get into the same server with the same credentials, so it has something to do with my computer not my account. Do any of you have any ideas on what the problem could be?

View 5 Replies View Related

Networking :: Can't Ping Server From Client But After Run In Server RHEL5

Nov 27, 2010

I have 2 ethernet cards but when I look at the Network configuration in "Hardware Tab" I have another acx wireless network. How to delete that because In my system Idon't have wireless card..probably installed before but want delete it now.

[code]...

then windows can ping server and resolve ip address and browsing Internet but can't ping [URL]... result is Request time out. ICMP already enabled in iptables.

View 6 Replies View Related

General :: Connecting From A Windows7 Client To A Server Through Vnc Server?

Jul 29, 2011

i tried to connecting from a windows7 client to a linux server through vnc server.But its very slow , is there any alternative for vnc . i heard that samba can be used as a remote desktop tool if its true please reply with configuration details.

View 2 Replies View Related

Server :: How To Force Squid3 To Use SSL Connection Between Client And Server?

Sep 17, 2010

I actually have a server and a client.The client must connect to the server (via internet) to access to external websites. (You can see the attachment, maybe it's more clear )My actual problem is, I have configure Squid on my server, but I want to force SSL for the connection between the client and the server.I didn't really find nice tutorials about on that, maybe someone have an idea ? Or maybe some indications ?

View 1 Replies View Related

Server :: How To Make Machine As A Client Of NIS Domain Server?

Jan 19, 2011

In a newly installed Linux machine which is a client machine, is not listening to NIS domain server even after setting IP address ,default gateway,and subnet mask.What are all the changes to be done in configuration file.And how can be solved

View 2 Replies View Related

Server :: How To Setup CVS Server In Fedora11 And CVS Client In Windows Xp

Sep 12, 2009

I have one Windows-XP on Machin 1 and one Linux on Machine 2.

I want make Linux machine as CVS server and Windows Xp as CVS client.

How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?

Photo : http://img27.imageshack.us/img27/5864/cvsserver.gif

View 1 Replies View Related

Server :: Adding New User In NIS Server And Client

Apr 27, 2010

I am Amit, working with IGate. I am able to configure NIS server and client,but after configuring server and client,when I add a new user to server and client and when I login througy new user from client, It shows error "user cannot found".I added a new user to NIS server make entry of user to client pc in /etc/auto.master file and restarted the services bind,nfs,autofs,portmap on server also restarted the serveces on client bind,autofs,portmap then alon I cannot login by new user on client matchine. Please tell me what is cause and how to resolve it.I shared server's /home dir and on client pc automounted the server's /home dir by making entries in /etc/auto.misc file on client pc.

View 7 Replies View Related

Server :: Client Computer Not Dig Bind Server?

Jul 28, 2010

I have configureed Bind in a Linux box. Well pc1 i.e "pc1.mydomain.com" is my client machine and main server is the computer in which bind is install.The client computer pc1 and the main server (Bind server) i.e FQDN "mainserver.mydomain.com "are on the same network.from client machine i can't resolve the name to IP address as my server do successfully with client. The /etc/resolv.conf file in my bind server is as

Code:
search mydomain.com
nameserver 192.168.1.254
The named.config it main configuration is as below
Code:
zone "mydomain.com" IN {

[Code]...

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved