Networking :: Can't Access Internet From Windows PC Over System Network / Sort It?
Jan 4, 2009
I have installed Fedora 8 on an old PC to use as a home network and I am having trouble getting a Windows PC running XP to get through to the internet, but I am able to access the internet from the Linux box with no issues. I can ping the gateway on eth0 from the Linux box, but I can't ping it from the windows PC. I am able to ping the IP address for eth0 from the Windows PC. My internet gateway is a modem/router from Hughes net. I also have a Netgear router between the Linux box and the Windows PC, but there doesn't appear to be any issues because I can ping both NICs from the Windows PC. I have pasted my Linux NIC config below. code...
View 7 Replies
ADVERTISEMENT
Jul 6, 2011
I connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies
View Related
May 29, 2009
I am working on a system with no internet access so I cant use yum. How do I install a feature like X-Windows or GNOME Desktop Environment(using groupinstall) directly from DVD?
View 3 Replies
View Related
Jun 13, 2011
I want to connect to a wireless open ad-hoc network to have internet access. It worked a while ago (1/2 year or something) but some update must have messed something up so it doesn't work any longer. Situation: There is a laptop that is running windows 7 and is connected to the internet via cabel. A open ad-hoc network is configuered with sharing of internet connection, status of the ad-hoc network is "waiting for users to connect". I want to connect with a second laptop that is running ubuntu 11.04. I can find the network and connect to it.
Problem: I cannot get any internet access while being connected to the ad-hoc network. So my questions are: how can i find out if what causes the Problem? I suspect a driver issue, but I'm not sure. required information from Howto post a wireless issue:
[Code]...
View 5 Replies
View Related
Mar 22, 2011
I have created more A record in dns. one record is link to my local ip, i have already static ip, how can i access my local website from global.
View 11 Replies
View Related
Jan 26, 2011
using Samba? I don't know anything about it,since I've never had the opportunity to use it, so - is it possible?
View 3 Replies
View Related
Feb 5, 2010
I am attempting to connect Ubuntu 9.10 to the Internet.I have a network connection, and Karmic detects it fine. I can ping addresses within our network (e.g. the Windows computer in the next room), and I can ping the router, but if I ping, say www.google.com, it says "Destination Net Unreachable". Previously, in Jaunty, I had a similar problem.I found a workaround: launch Pidgin. Somehow, launching Pidgin temporarily edits my configuration. However, in Karmic, I have no access to Pidgin, however, and Empathy does not do the same thing. Since I have no Internet, I cannot "sudo apt-get install" anything.How can I get the Internet working?
View 5 Replies
View Related
Sep 17, 2009
if i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.
View 1 Replies
View Related
Aug 15, 2010
I am coming from Windows XP Pro, on the same machine (and where I am writing this post from) so the internet clearly works on XP. On F13, the eth0 connection is activated and the drivers for the NIC chip were installed with the OS. The NIC is Intel Pro/100 VE. The problem that occurs is that the system updater (in GNOME) can access the internet, and installed a bunch of updates after installing the OS. I know it can get to the internet because the updates worked and in the System Monitor, I can see both uploading and downloading occurring during the updates. Now the problem is that when I open FF, I can't seem to get to pages, and I get the usual FF error (pic -- [URL]). However, I CAN get to [URL] as well as [URL] , but I cannot access several other subdomains on fedoraproject.org . I also cannot get to any other page online, ([URL] for example).
View 8 Replies
View Related
Mar 24, 2010
Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
[code]...
View 2 Replies
View Related
Jul 1, 2010
I'm trying to configure internet access using KDE network manager. Added new VPN pptp connection, set gateway and other options but manager tries to connect for about a minute and breaks then. Here is /var/log/daemon.log
Code:
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
As I understand the main problem is in "(IP Config Get) timeout exceeded".
Configuration: Kubuntu 10.04 x86, VPN server with MSCHAPV2 auth, no compression, no encrypting.
View 1 Replies
View Related
Jan 20, 2011
I have had a heck of a time trying to get my laptop running ubuntu to connect to my home network. I have managed to get it to work at my university which would seemingly be more difficult than getting it to work at home, so I know for a fact it isn't a hardware or driver issue. If I try to connect via ethernet cable from my router, it detects that I connected the cable but says "disconnected" and never lets me connect. If I SKIP the router and go from my modem directly to my laptop via ethernet cable it works great.
Using the wireless network tool I can see all of the wireless connections in my area. When I go to connect to my network it prompts me for the WEP key and when I enter it and hit connect it just keeps cycling and eventually times out and finally again prompts me for my WEP key. I know this network works as it works just fine on my Windows 7 partition. Another interesting note - both my wireless and ethernet connections both worked flawlessly and stoopid easily on the live cd but don't after the full install.
If I manually enter in the information for my wireless through IPv4 settings and enter in the Address,Netmask and gateway I can connect to my network - but then I have no active internet connection. Same deal with my wired connection. Is this because choosing this manual method grays out the DHCP?
View 5 Replies
View Related
Feb 10, 2011
I am trying to connect to the college campus wifi network, but having difficulties in Linux.I am dual-booting Windows 7 and Ubuntu 10.10, and I use Google Chrome web browser on both. When I boot into Windows, my laptop connects to the network (as I can see from the taskbar icon) and I can (and currently am) connect in Chrome.However, in Ubuntu, it connects (or so the icon indicates) but Chrome doesn't load any pages.The campus network is unsecured, but once you open the browser, you are prompted with a log-in page (student ID and password) to actually connect.Here is my output for iwconfig:
Code:
wlan0 IEEE 802.11bgn ESSID:"sjsu_campus"
Mode:Managed Frequency:2.412 GHz Access Point: 00:24:6C:BC:D3:E0
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
[code]....
View 1 Replies
View Related
Mar 28, 2011
Okay, a couple of weeks ago I was running 10.04, got an auto update that needed a firefox restart, so rather than restart, I just shutdown the computer for the weekend. When I booted the computer on Monday it would find sites (www.google.com, start.ubuntu.com) but it wouldn't download the necessary items to load the page. Now I have a windows laptop sitting next to the ubuntu box and it was online with no issues, so I know it wasn't the connection itself. So I decided that the update messed up the system so I downloaded 10.10 and installed that and ran that all last week.
On Friday I got a system update that required a firefox restart, so I ran firefox for the day and decided that since it was friday, I would just shutdown the computer and reboot on Monday.Well now Monday is here and now I again have sloooowww internet, to the point that URL.. times out and won't come up. I have tried doing a traceroute on both machines and the windows box gets all the way to www.google.com, but the ubuntu box gets about halfway there and then gets no response. I am at a loss, I don't want to reinstall every week. I did try to reboot and run the previous version of 10.10 that shows in the boot menu, but that does the same thing. One thing I did notice is that the broadcast ip is different than the machine IP, don't know enough to know if this is a problem.
View 8 Replies
View Related
Apr 7, 2010
I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration:
[url]
I am using wireless connection to access internet.
View 1 Replies
View Related
Mar 1, 2009
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
View 2 Replies
View Related
Dec 30, 2009
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies
View Related
Apr 26, 2011
can't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
View 2 Replies
View Related
Mar 3, 2009
whenever I try and acces my windows network it just says "Failed To Receive Share List From Server"It has previously worked fine in ubuntu and suse. Anyway I can get this to work?
View 2 Replies
View Related
Apr 9, 2010
Linux Internet Doesnt work
Its connected...
to router netgear
View 3 Replies
View Related
Jan 19, 2011
I am using Linux operating system fedora 6 .Before today everything is going well. But today internet connection gets failed. It can not connect to the server for the internet connection. But in the same computer,installed windows operating system shows the internet connection.Please try to answer my question why the Linux operating system can not connect to the internet?
View 4 Replies
View Related
Jul 20, 2010
I have an iBook G4 running Debian Lenny. I was wondering, is there anyway to connect to the internet while on a Windows network at school over Ethernet using smbclient? I have both GNOME 2.22 and LXDE .5 on the machine.
View 3 Replies
View Related
Mar 26, 2010
So, I'm trying to set up a network with my windows netbook so the Ubuntu comp can access the internet through the netbook's wireless. Finally got the network set up, but can't access the internet on the Ubuntu comp. Also, the Ubuntu machine can recognize and access the files on the netbook, but the netbook only sees a computer named Owner-a6012abd6 which asks for a password.
The netbook is running Windows XP SP3, with an Atheros AR9285 Wireless Network adapter(internet) and an Atheros AR8132 PCI-E Fast Ethernet Controller. The Ubuntu comp is running Ubuntu 9.04.
View 1 Replies
View Related
May 3, 2011
I have two machines running ubuntu connected through a BiPAC 7401VGPR3 (Billion modem/router). One is a new notebook running Ubuntu 11.04 and the other desktop computer is running 10.04 connected to the printer and external hdd.
I can't find the right documentation to network them so that I can share HDD, printers, devices, etc. I can't get either computer to see each other via network searches.
Also may need to boot into Windows from time to time and access the network from there.
View 9 Replies
View Related
May 20, 2009
I have built a linux router with a pc having two network cards. I am running ubuntu 8.10.
I have enabled forwarding on the router. One network (192.168.1.0/24)is connected to eth0 and another (192.168.2.0/24) is connected to eth1.
The interfaces have addresses 192.168.1.1 and 192.168.2.1.
On any side side of the network, I can ping both interfaces on the router.
However when I ping a machine on the other side of the network, I get 100% packet loss.
I have not touched iptables on the router or any machines.
What I am doing wrong?
View 2 Replies
View Related
Aug 5, 2010
I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
View 7 Replies
View Related
Oct 26, 2010
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
View 9 Replies
View Related
Jun 19, 2011
I wish to write a python code so that I can access a file on a windows computer on the network. I know the IP, Computer Name, Workgroup, username,password and any other neccesary detail of the computer. I also have the access to the computer to intall any software I may need to install on the said windows computer.
Kindly guide me so that I may access the files. The files are in a folder shared over the network but not on the windows drive of the computer.
I am able to access the files using gui (ubuntu 11.04).
View 1 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Jan 20, 2010
This is happening pretty often. when in ubuntu, usually while i'm browsing the web, my browser will go dim then a box will come up saying something along the lines of missing resources. the thing is, all my desktop icons will then turn to red x's and no text characters on any further boxes will show. when i restart it says grub error and takes one more restart to finally come on. i got fed up with it and switched over to windows 7 where my browser also froze and my computer froze up.
View 9 Replies
View Related
