Networking :: Access Local Ip From Outside Network(internet)?

Mar 22, 2011

I have created more A record in dns. one record is link to my local ip, i have already static ip, how can i access my local website from global.

View 11 Replies


ADVERTISEMENT

Ubuntu Networking :: Remote Desktop Access "Your Desktop Is Only Reachable Over The Local Network. Others Can Access Your Computer Using The Address 127.0.0.1 Or Tabatha.local"

Feb 19, 2010

Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.

When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.

View 1 Replies View Related

Ubuntu Networking :: Static IP - Local But No Internet Access

Jun 4, 2010

my computer with ubuntu 9.10 is in a LAN. We use static ip and do not have dhcp. I can go up to our server and browse our website but cannot access internet. my ifconfig, iwconfig, lspci are as follows...

[Code]....

View 3 Replies View Related

Networking :: Routing To Internet Through One Network And To Local Ips In Another Network?

Mar 31, 2009

I have two networks. One of them is wired, the other is wireless. The wired has an internet connection and a few other computers connected to it. The wireless network has a few hosts connected to it too, but it has no internet connection. What I've been trying, fruitlessly, to do, is make all connections that are bound to the internet, or my wired network, be routed that way, and all the connections to the hosts of the wireless network go that way.

Here's the setup..

Wired:

192.168.1.0/24 Gateway = 192.168.1.1

Route internet through here

Wireless

192.168.2.0/24 Gateway = 192.168.2.1

If my computer sends a packet to the internet, it should be routed through 192.168.1.1 If I send a packet to one of the local hosts of the wireless network, it should be routed through 192.168.2.1. Here's the routing table I've set up(This is one of many configurations I've tried)

Code:

$ ip route show
192.168.2.1 dev wlan0 scope link
192.168.2.0/24 via 192.168.2.1 dev wlan0 src 192.168.2.4

[code]....

With this, and everything else, I get destination host unreachable when pinging. The strange thing is that, if I unplug my eth cable, reboot and connect to the wireless network, everything is fine and I can access the router and the others. I'm trying to improve my networking skills, as I've had this of setting up a small linux box as a router for quite some time, for the fun of it, but I need to get routing under control before I go ruin my network.

View 6 Replies View Related

Ubuntu Networking :: Sharing Internet Access And Local Files/server

Jan 16, 2011

i would like to setup one of my old pcs as a file server and internet gateway; we are living in a large building shared with 40 others. the ubuntu box would be the one connected to the internet via ethernet and sharing connexion via wifi. i haven't started yet - presently, i am doing the ground work and reading before to start i understand sharing the internet is relatively simple and can be done from the GUI

What we would like is slightly like BT Fon or BT Open Zone in the UK: you can hook on a free network but in order to access outside (internet: email, web, ftp, etc) you need to login login would help us monitor fair usage. I imagine something with username and password for each user would do: as we are a few in the same building not everyone is actually paying for the connection and we don't want to end up with rather large excess bills. So the ones who are paying access both files and internet; those who dont just have access to the files on the local server.

Do i need Ubuntu server to set this up? What hardware would be ideal - given we are all far from rich but willing to have a nice setup

It would be great if you could share some knowledge around the topic and eventually provide some tutorial; also any heads-up on the hardware side would be great! (signal booster, etc - there's 3 floors and 3 buildings)

View 1 Replies View Related

Networking :: Can Connect To Internet But Not Local Network?

May 3, 2010

I Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working

View 3 Replies View Related

CentOS 5 Networking :: DNS Configuration - Local Network And Internet Names

Jan 28, 2009

We are in the process for Integration Network with our Government Network.
Let say that our network are 192.168.0.0/24
And the Government network are 10.0.0.0/8
I want to know if the local network can resolve the internet names in Government Network. I am using Bind for DNS.

View 1 Replies View Related

Ubuntu Networking :: Cannot Access Apache Server Pages From Outside Local Network

Jan 26, 2011

I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17

My site is at [URL]

Here is the output of ifconfig

Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

[Code]....

View 4 Replies View Related

Ubuntu Networking :: Broadcom WLAN - Connection Refuses To Load Anything Off The Internet / Local Network

Jun 6, 2010

I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.

[Code]....

and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.

View 5 Replies View Related

Networking :: (socket Progamming In C) / Decoding The Domain Name When An User In The Local Network Is Logging Onto Internet?

Jun 22, 2009

I am currently working on a project related to packet sniffing which has been implemented using the concept of raw sockets. I am using C language.I am able to decode the following details from the packets received from a local network,like:

source and Destination Mac Address
source and Destination IP Address
source and Destination port no

But I am having trouble in decoding the domain name when an user in the local network is logging onto internet.For eg. if a user in the local network is trying to log on to web using his browser say if he has logged on to url then from the packet I need to get the following details

source Mac Address from which user had logged on
source IP Address from which user had logged on
domain name

View 1 Replies View Related

Ubuntu Networking :: Can't Access Internet Via Ad Hoc Network

Jun 13, 2011

I want to connect to a wireless open ad-hoc network to have internet access. It worked a while ago (1/2 year or something) but some update must have messed something up so it doesn't work any longer. Situation: There is a laptop that is running windows 7 and is connected to the internet via cabel. A open ad-hoc network is configuered with sharing of internet connection, status of the ad-hoc network is "waiting for users to connect". I want to connect with a second laptop that is running ubuntu 11.04. I can find the network and connect to it.

Problem: I cannot get any internet access while being connected to the ad-hoc network. So my questions are: how can i find out if what causes the Problem? I suspect a driver issue, but I'm not sure. required information from Howto post a wireless issue:

[Code]...

View 5 Replies View Related

Ubuntu Networking :: Network Connection But No Internet Access

Feb 5, 2010

I am attempting to connect Ubuntu 9.10 to the Internet.I have a network connection, and Karmic detects it fine. I can ping addresses within our network (e.g. the Windows computer in the next room), and I can ping the router, but if I ping, say www.google.com, it says "Destination Net Unreachable". Previously, in Jaunty, I had a similar problem.I found a workaround: launch Pidgin. Somehow, launching Pidgin temporarily edits my configuration. However, in Karmic, I have no access to Pidgin, however, and Empathy does not do the same thing. Since I have no Internet, I cannot "sudo apt-get install" anything.How can I get the Internet working?

View 5 Replies View Related

Networking :: Connected To Wireless Network But No Internet Access?

Sep 17, 2009

if i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.

View 1 Replies View Related

Ubuntu Networking :: Wired Network Connected, But No Internet Access?

Mar 24, 2010

Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):

Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686

[code]...

View 2 Replies View Related

Ubuntu Networking :: Configure Internet Access Using KDE Network Manager?

Jul 1, 2010

I'm trying to configure internet access using KDE network manager. Added new VPN pptp connection, set gateway and other options but manager tries to connect for about a minute and breaks then. Here is /var/log/daemon.log

Code:
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started

[Code]....

As I understand the main problem is in "(IP Config Get) timeout exceeded".

Configuration: Kubuntu 10.04 x86, VPN server with MSCHAPV2 auth, no compression, no encrypting.

View 1 Replies View Related

Ubuntu Networking :: Can Connect To Wireless Network But No Internet Access

Jan 20, 2011

I have had a heck of a time trying to get my laptop running ubuntu to connect to my home network. I have managed to get it to work at my university which would seemingly be more difficult than getting it to work at home, so I know for a fact it isn't a hardware or driver issue. If I try to connect via ethernet cable from my router, it detects that I connected the cable but says "disconnected" and never lets me connect. If I SKIP the router and go from my modem directly to my laptop via ethernet cable it works great.

Using the wireless network tool I can see all of the wireless connections in my area. When I go to connect to my network it prompts me for the WEP key and when I enter it and hit connect it just keeps cycling and eventually times out and finally again prompts me for my WEP key. I know this network works as it works just fine on my Windows 7 partition. Another interesting note - both my wireless and ethernet connections both worked flawlessly and stoopid easily on the live cd but don't after the full install.

If I manually enter in the information for my wireless through IPv4 settings and enter in the Address,Netmask and gateway I can connect to my network - but then I have no active internet connection. Same deal with my wired connection. Is this because choosing this manual method grays out the DHCP?

View 5 Replies View Related

Ubuntu Networking :: No Internet Access Through Wireless Campus Network?

Feb 10, 2011

I am trying to connect to the college campus wifi network, but having difficulties in Linux.I am dual-booting Windows 7 and Ubuntu 10.10, and I use Google Chrome web browser on both. When I boot into Windows, my laptop connects to the network (as I can see from the taskbar icon) and I can (and currently am) connect in Chrome.However, in Ubuntu, it connects (or so the icon indicates) but Chrome doesn't load any pages.The campus network is unsecured, but once you open the browser, you are prompted with a log-in page (student ID and password) to actually connect.Here is my output for iwconfig:

Code:

wlan0 IEEE 802.11bgn ESSID:"sjsu_campus"
Mode:Managed Frequency:2.412 GHz Access Point: 00:24:6C:BC:D3:E0
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off

[code]....

View 1 Replies View Related

Ubuntu Networking :: Wired Network With Internet Connection But No Access

Mar 28, 2011

Okay, a couple of weeks ago I was running 10.04, got an auto update that needed a firefox restart, so rather than restart, I just shutdown the computer for the weekend. When I booted the computer on Monday it would find sites (www.google.com, start.ubuntu.com) but it wouldn't download the necessary items to load the page. Now I have a windows laptop sitting next to the ubuntu box and it was online with no issues, so I know it wasn't the connection itself. So I decided that the update messed up the system so I downloaded 10.10 and installed that and ran that all last week.

On Friday I got a system update that required a firefox restart, so I ran firefox for the day and decided that since it was friday, I would just shutdown the computer and reboot on Monday.Well now Monday is here and now I again have sloooowww internet, to the point that URL.. times out and won't come up. I have tried doing a traceroute on both machines and the windows box gets all the way to www.google.com, but the ubuntu box gets about halfway there and then gets no response. I am at a loss, I don't want to reinstall every week. I did try to reboot and run the previous version of 10.10 that shows in the boot menu, but that does the same thing. One thing I did notice is that the broadcast ip is different than the machine IP, don't know enough to know if this is a problem.

View 8 Replies View Related

Networking :: Can't Access Internet From Windows PC Over System Network / Sort It?

Jan 4, 2009

I have installed Fedora 8 on an old PC to use as a home network and I am having trouble getting a Windows PC running XP to get through to the internet, but I am able to access the internet from the Linux box with no issues. I can ping the gateway on eth0 from the Linux box, but I can't ping it from the windows PC. I am able to ping the IP address for eth0 from the Windows PC. My internet gateway is a modem/router from Hughes net. I also have a Netgear router between the Linux box and the Windows PC, but there doesn't appear to be any issues because I can ping both NICs from the Windows PC. I have pasted my Linux NIC config below. code...

View 7 Replies View Related

Networking :: Setup VMware's Network Configuration For Red Hat Can Access Internet?

Apr 7, 2010

I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.

Below link is the configuration of VMware network setup both Server 2003 and Red Hat.

Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg

Here is Windows Server 2003 configuration:
[url]

I am using wireless connection to access internet.

View 1 Replies View Related

Fedora Networking :: Samba Share With Two Network Cards - No Internet Access

Mar 1, 2009

I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:

Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS

View 2 Replies View Related

Fedora Networking :: Network To Lan - For File Sharing - Printing And Internet Access

Dec 30, 2009

I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.

View 4 Replies View Related

Ubuntu Networking :: Connected To Network Via Live Cd (10.10) - Unable To Access Internet

Apr 26, 2011

can't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).

View 2 Replies View Related

Ubuntu Networking :: Can See All Devices On Local Network And Their Local Ip Addresses

May 16, 2010

I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)

View 6 Replies View Related

Ubuntu Networking :: Unable To See Local Web Sites From Local Network

Jun 28, 2011

I have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).

View 2 Replies View Related

Ubuntu Networking :: Use Local IP Only On Local Network?

May 25, 2010

I've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.

However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.

Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?

View 6 Replies View Related

Slackware :: Can't Access Server Outside The Local Network

Sep 22, 2010

I have a problem with my slackware 13.1 that is that i can�t access it outside my local network. It�s running behind a router and i have activated the DMZ to my slackware computer i can access the web with my slackware computer but i can�t get access to it outside my LAN.

View 8 Replies View Related

OpenSUSE Network :: 11.3 Amd64 - Having Internet Access But Cannot Access Repos - IPV6?

Aug 26, 2010

I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message

- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)

This was followed by a message box containing

- UI syntax error
- no widget with ID 'contents

Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)

[code]......

View 8 Replies View Related

Ubuntu Servers :: 10.4 Needs Connected To Local Network And Internet?

Jul 2, 2010

I jsut installed 10.4 Server. I want to hook it to the network. I want to hook up through wlan0. my router is WPA and is my DHCP.

View 4 Replies View Related

Security :: IPtables Limit SSH From Local Network To Internet

Feb 24, 2010

I have a linux firewall. I want to limit a ssh connection number from local network to internet .

Example :
Internal pc (192.168.0.10) start a ssh scan to the external (internet) host.

I want that iptables limit that host (192.168.0.10) and block ssh connection from this host at 3 attempt.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved