Ubuntu Networking :: Network Connection But No Internet Access
Feb 5, 2010
I am attempting to connect Ubuntu 9.10 to the Internet.I have a network connection, and Karmic detects it fine. I can ping addresses within our network (e.g. the Windows computer in the next room), and I can ping the router, but if I ping, say www.google.com, it says "Destination Net Unreachable". Previously, in Jaunty, I had a similar problem.I found a workaround: launch Pidgin. Somehow, launching Pidgin temporarily edits my configuration. However, in Karmic, I have no access to Pidgin, however, and Empathy does not do the same thing. Since I have no Internet, I cannot "sudo apt-get install" anything.How can I get the Internet working?
View 5 Replies
ADVERTISEMENT
Mar 28, 2011
Okay, a couple of weeks ago I was running 10.04, got an auto update that needed a firefox restart, so rather than restart, I just shutdown the computer for the weekend. When I booted the computer on Monday it would find sites (www.google.com, start.ubuntu.com) but it wouldn't download the necessary items to load the page. Now I have a windows laptop sitting next to the ubuntu box and it was online with no issues, so I know it wasn't the connection itself. So I decided that the update messed up the system so I downloaded 10.10 and installed that and ran that all last week.
On Friday I got a system update that required a firefox restart, so I ran firefox for the day and decided that since it was friday, I would just shutdown the computer and reboot on Monday.Well now Monday is here and now I again have sloooowww internet, to the point that URL.. times out and won't come up. I have tried doing a traceroute on both machines and the windows box gets all the way to www.google.com, but the ubuntu box gets about halfway there and then gets no response. I am at a loss, I don't want to reinstall every week. I did try to reboot and run the previous version of 10.10 that shows in the boot menu, but that does the same thing. One thing I did notice is that the broadcast ip is different than the machine IP, don't know enough to know if this is a problem.
View 8 Replies
View Related
Jul 9, 2010
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jul 25, 2010
I have recently installed ubuntu 9.10. Earlier I had ubuntu 9.04. On that my internet was running perfectly well.After installation I created new connection as I had done for 9.04 version using "Network connections , Edit connections". However, after configuring connection(uname , password etc.) I wasn't able to access Internet.So I tried using "pppoeconf" utility. After using this now whenever I click on network connections applet on top panel , it shows in menu "device not managed".Can somebody point out what went wrong and what to do so as to be able to acess Internet in ubuntu?
View 9 Replies
View Related
Dec 6, 2010
I had been happily using a wireless connection for about two weeks. The connection then went down for a few days. Since it came back up, I can connect to the network, but cannot access the internet. Other users of the network can both connect to the network, and access the internet, though people have experienced the same problem as me the last time the network went down (they could connect to the network but not access the internet). I have tried deleting and re-starting the connection, to no avail. I have looked around the forums, but haven't found anything that can help: do any of you have any suggestions? I am malarial and at the end of tether.It is not a problem with Ipv6, which is set to ignore, as it was in the past when the connection workedI am running Ubuntu 10.10 on an X61 Thinkpad. Below is the output of iwconfig, route -n, lspci, and what happens when I ping other network
Iwconfig:
eth0 Link encap:Ethernet HWaddr 00:1d:72:9e:09:8f
UP BROADCAST MULTICAST MTU:1500 Metric:1
[code]....
View 2 Replies
View Related
Jan 17, 2011
My Internet connection works.Using no VPN connection, I can access the Tnternet from the gnome-terminal (ping, apt-get, lynx), as well as from any GUI application.As soon as I establish a VPN connection via openconnect, GUI applications such as firefox, transmission and thunderbird still work.But terminal applications (such as mutt, apt-get etc), some daemons (like mpdscribble) and some GUI applications (such as the easytag cddb search) don't work anymore.
View 2 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
Jan 26, 2010
With Encrypted Wireless Connection Not Able to Access Internet - no pings, internet browsing, etc. However, without encryption I am able to browse the internet. I need encryption ..
I am pasting diagnostics collected by shell procedure collectNWdata.sh..
Code:
collectNWData.sh V0.6.2.0 (Rev: 1.193, Build: 2010/01/20 21:22:30 UTC)
--- Which type of your network connection should be tested?
--- (2) Wireless connection (WLAN)
--- What's the type of networktopology?
[Code].....
View 8 Replies
View Related
Mar 16, 2010
As I view it, Ubuntu has a great security risk in that it still allows internet access when the VPN connection has been lost, for whatever reason. As it is now, when the VPN connection fails you get bumped back to using your regular IP, and whatever you are doing becomes transparent to anyone watching. This is simply unacceptable for an allegedly secure platform. Does anyone know of a way to fix this with a script/program, or is there a distribution/OS that allows this? Windows re-dials the vpn automatically, but still allows internet access in the mean time.
View 1 Replies
View Related
Sep 22, 2010
Recently I had installed Ubuntu 10.04 in which I had connected to the internet by way of terminal (pppoeconf) and I could access any site with ease.But one fine day suddenly I could not access the net, I try to locate the notification icon (network manager),but could not find it.I did this and that,googled it trying to find the solution but alas to my disappointment I had to format it.
After reinstallation of Ubuntu I connect the internet by way of editing connection on panel and i could access the net. The problem is that I could not access some site especially org site e.g Home - Desiring God so can anybody guide me in how to connect in most better way.
View 5 Replies
View Related
Jan 18, 2010
I installed Ubuntu 9.10 using the default setup (Gnome I think) and on my Gateway Notebook using a wireless connection. It appears to be working great and I can even see my Windows drives and network storage on my home office systems.I have also set it up to run my favorite Bible software on Windows running under VirtualBox. I then installed the KDE Desktop so that I can select either desktop when logging on.
However, once I am in the KDE desktop, I cannot connect to the internet. I have checked and double-checked and the wireless settings seem to be the same on both the Gnom and KDE Desktops but still no network or internet connection when using KDE. I might mention that I am using the 64 Bit version of Ubuntu.
View 2 Replies
View Related
Mar 17, 2010
I'm trying to setup network server for a week now and I was able to setup network in which i can ping the other workstation that is connected to my switch which is also connected to my server and I can also ping the server from local workstation.
I have 2 NIC, I use eth0 to dial to my dsl connection(ppp0 has the IP of my internet) and I use eth1 to connect to the switch and use to connect to the other local workstation
Now my problem is I don't know how can I share the internet connection from my eth0 or the ppp0 to my eth1 to the network, what do I need to be able to share the internet connection to the workstation that is connected to my switch.
View 3 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
Oct 31, 2010
I just installed Ubuntu Netbook 10.10 on my Lenovo ideapad S10e. Under the network manager it says that firmware is not installed for the wirless card but that is something for a different day. On the ethernet connection it attempts to connect via dhcp and then comes up saying it is disconnected. I attempted to set it as a static connection, when i do that it shows that its connected but I still can not connect to the internet.
View 2 Replies
View Related
Jun 13, 2011
I want to connect to a wireless open ad-hoc network to have internet access. It worked a while ago (1/2 year or something) but some update must have messed something up so it doesn't work any longer. Situation: There is a laptop that is running windows 7 and is connected to the internet via cabel. A open ad-hoc network is configuered with sharing of internet connection, status of the ad-hoc network is "waiting for users to connect". I want to connect with a second laptop that is running ubuntu 11.04. I can find the network and connect to it.
Problem: I cannot get any internet access while being connected to the ad-hoc network. So my questions are: how can i find out if what causes the Problem? I suspect a driver issue, but I'm not sure. required information from Howto post a wireless issue:
[Code]...
View 5 Replies
View Related
Dec 1, 2010
I've got access to my LAN and the Internet via my wired ethernet connection. I'd like to share that access with my iPod Touch (device shouldn't really matter) via an Ad-hoc wi-fi network.
This tutorial in the docs seems to describe the right setup but is very out of date (7.04). Instead I found this tutorial and followed it to create the Ad-hoc wireless network. I was able to connect my touch to the resulting ad-hoc network without a problem, but I didn't have LAN/Internet access.What's the next step to get the clients on the ad-hoc network out to the Internet?I found this page in the docs that says I'd need to install dnsmasq-base and uninstalling dnsmasq. I checked and dnsmasq-base is already installed but dnsmasq is not. I do have dnsmasq in /usr/sbin but the package description makes it sound like this should come with dnsmasq. Is the page out of date? Will uninstalling dnsmasq cause other problems?
View 9 Replies
View Related
Jan 17, 2011
I've read a lot on the internet about various ways of doing this but i've been unsuccessful each time. Basically what i've done is accidently un-installed network-manager because I was having trouble staying connected on my WPA network. The easiest way of reinstalling it I know of is using the CD but I don't have a CD ROM drive and the pen drive I used to install it I no longer have.
I tried using a program called Keryx but you need python installed and from some reason this doesn't come with ubuntu 10.10. I've also downloaded the .deb packages but I still need to download 200kb which is a killer. I've also downloaded it from here too [URL] but the install file makes no sense to me as i'm not a massive linux user. One last thing reinstalling isn't really an option as i've already put a lot of time into setting up this computer.
View 8 Replies
View Related
Apr 8, 2011
I have installed centos 5.5 / 64. Configured network but - no internet. On my router I see my pc and IP. On centos, Firewall and selinux are disabled. I try to disable network and activate network manager and reverse but no luck internet is not working. Try to ping my router 192.168.5.1
View 6 Replies
View Related
Mar 22, 2011
I have created more A record in dns. one record is link to my local ip, i have already static ip, how can i access my local website from global.
View 11 Replies
View Related
Jan 31, 2010
Sometimes either due to a power outage or due to lightning I turn off my Wimax modem and continue to use my laptop on the battery.Then when I turn the modem back on, there is no internet connection.Here's what I've tried:
1. turn off and on the network connections - right-clicking on the icon on the bar on top of my screen.
2. turn off and on the dsl-provider connection - no effect.
3. When I tried to re-do pppoeconf, it says that there's no response from the concentrator.
This has happened a few times in the past and the only thing I can do to go online again is restart the computer. And it works.Now on Windows, the double-computer icon showing a network indicates connectivity AND data movement. Unfortunately we don't have this on Ubuntu.I'm just after a restart and I'm online now. But I'd like to know if there's a way around this without having to restart.
View 3 Replies
View Related
Apr 10, 2010
I'm running Ubuntu 9.10 with fluxbox installed. Occasionally my internet connection will stop working, but when I check on wifi radar, I'm still connected to the network. The router is not plugged into a computer at the moment, just the cable jack. It is likely a hardware problem however, since my other laptops also experience disconnects. Any help beyond "change the cable" would be greatly appreciated. For instance, even though I am connected to the network, I cannot post at the moment due to lack of internet connection.
View 1 Replies
View Related
Jul 7, 2011
I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
View 3 Replies
View Related
Mar 24, 2010
Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):
Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686
[code]...
View 2 Replies
View Related
Jul 1, 2010
I'm trying to configure internet access using KDE network manager. Added new VPN pptp connection, set gateway and other options but manager tries to connect for about a minute and breaks then. Here is /var/log/daemon.log
Code:
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jul 1 17:35:22 dvinokurov-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started
[Code]....
As I understand the main problem is in "(IP Config Get) timeout exceeded".
Configuration: Kubuntu 10.04 x86, VPN server with MSCHAPV2 auth, no compression, no encrypting.
View 1 Replies
View Related
Jan 20, 2011
I have had a heck of a time trying to get my laptop running ubuntu to connect to my home network. I have managed to get it to work at my university which would seemingly be more difficult than getting it to work at home, so I know for a fact it isn't a hardware or driver issue. If I try to connect via ethernet cable from my router, it detects that I connected the cable but says "disconnected" and never lets me connect. If I SKIP the router and go from my modem directly to my laptop via ethernet cable it works great.
Using the wireless network tool I can see all of the wireless connections in my area. When I go to connect to my network it prompts me for the WEP key and when I enter it and hit connect it just keeps cycling and eventually times out and finally again prompts me for my WEP key. I know this network works as it works just fine on my Windows 7 partition. Another interesting note - both my wireless and ethernet connections both worked flawlessly and stoopid easily on the live cd but don't after the full install.
If I manually enter in the information for my wireless through IPv4 settings and enter in the Address,Netmask and gateway I can connect to my network - but then I have no active internet connection. Same deal with my wired connection. Is this because choosing this manual method grays out the DHCP?
View 5 Replies
View Related
Feb 10, 2011
I am trying to connect to the college campus wifi network, but having difficulties in Linux.I am dual-booting Windows 7 and Ubuntu 10.10, and I use Google Chrome web browser on both. When I boot into Windows, my laptop connects to the network (as I can see from the taskbar icon) and I can (and currently am) connect in Chrome.However, in Ubuntu, it connects (or so the icon indicates) but Chrome doesn't load any pages.The campus network is unsecured, but once you open the browser, you are prompted with a log-in page (student ID and password) to actually connect.Here is my output for iwconfig:
Code:
wlan0 IEEE 802.11bgn ESSID:"sjsu_campus"
Mode:Managed Frequency:2.412 GHz Access Point: 00:24:6C:BC:D3:E0
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
[code]....
View 1 Replies
View Related
Sep 17, 2009
if i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.
View 1 Replies
View Related
Oct 14, 2010
How do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies
View Related
Apr 26, 2011
can't access internet. The up and down icon appears by the network connection (upper right hand corner). When I review connection properties, I see that the computer has a valid address, subnet, gatway, dns, etc... But it still can't connect to the internet. I can't ping external addresses either. But I can access internal addresses (local router).
View 2 Replies
View Related
