I am using Linux operating system fedora 6 .Before today everything is going well. But today internet connection gets failed. It can not connect to the server for the internet connection. But in the same computer,installed windows operating system shows the internet connection.Please try to answer my question why the Linux operating system can not connect to the internet?
View 4 RepliesI can't connect internet using ADSL modem of bsnl.I am new user of linux(fedora8).To do so I go through system>administration>network configuration and trying to activate xdsl modem and ethernet but unfortunately ethernet does not seems though there is a ethernet card.Here it should be mention that in my windowsXP partion there is no problem for internet connection.so what can I do next?
View 1 Replies View RelatedI was not connecting to Internet in kde so i edited auto etho settings i make some changes
but alas! no Internet connection
and the worse thing is that i lost connection in gnome desktop too
but it is showing me i am connected to Internet
but i cannot surf (server not found))
{i changed the setting to default {{after i changed them in kde ]]
and notice following
in edit auto etho connection
connect Internet automatically-yes
ipv4 setting--
automatic (dhcp)addressees nonly
ipv6 setting
ignore
so ubuntu is showing me that i am connected to Internet but i cannot access Internet
so the main problem is ""ubuntu is showing that i am connected to Internet but my browser says no server found and i can not install software in software center it gives me error --please check you Internet connection
I just installed Suse Linux on a computer that had Windows Vista first.
Everything seems to work ... only that there is no Internet connection.
What could be the problem?
I have no idea how I managed this, but I am able to connect to the internet but NetworkManager doesn't show any connection. This means that until I kill it, I cannot log in with Pidgin, because it is waiting for a connection.
Do I disable NetworkManager completely or do I try to make it recognize that I am connected to the Internet? If the latter, then how should I go about? (Please let me know which files I need to show you, because I know I've messed around with a couple).
Is there any way to temporarily "switch off (and back on)" the internet connection on a system (that runs linux)? The following methods are not allowed:Turning off the router. That would lead to a lot of angry young individuals. This method must be particular to my workstation.Use root privileges (coz I do not have them).
Yank the ethernet cable from the system.Why: Sometimes the internet proves to be a distraction.I am using the following system: Fedora release 11 (Leonidas), linux kernel 2.6.30 and GNOME 2.26.3
I,m new to linux. I don't know how to do settings for Internet connection.
so, please send me complete detail of how to make settings for Internet connection.
Linux Internet Doesnt work
Its connected...
to router netgear
I have installed Fedora 8 on an old PC to use as a home network and I am having trouble getting a Windows PC running XP to get through to the internet, but I am able to access the internet from the Linux box with no issues. I can ping the gateway on eth0 from the Linux box, but I can't ping it from the windows PC. I am able to ping the IP address for eth0 from the Windows PC. My internet gateway is a modem/router from Hughes net. I also have a Netgear router between the Linux box and the Windows PC, but there doesn't appear to be any issues because I can ping both NICs from the Windows PC. I have pasted my Linux NIC config below. code...
View 7 Replies View RelatedI have (had) Debian Testing running on a 250GB IDE hard drive, partitioned normally.
I also have 4x 1TB drives in a raid 5 using mdadm, and 2x 500GB drives in a raid 1 also with mdadm.
I put the two arrays in lvm using:
I then used "lvcreate" to make storage/backup 300GB, and the rest went to storage/media (approx. 2TB usable). I put an xfs filesystem on both and mounted them.
All was working fine until the system drive shorted out and died on me this morning. As far as I can tell, all my other drives and everything else is fine. I do a daily rsnapshot of the filesystem, which of course is residing on storage/backup (stupid, I know). So I have full backups of everything, but I'll have to put a new hard drive in and reinstall Debian before I can restore everything.
I've reinstalled before and simply reassembled mdadm arrays and remounted them before with no problems, but this is the first time I've used lvm, so I'm not sure what I have to do to restore everything. Is it as simple as reinstalling the system then doing a:
I did a bit of searching, but I guess I'm not sure of the terminology associated with what I'm trying to do.
I'm currently connected via ethernet port (NOT wireless) to my DSL modem.
Every so often my connection gets 'saturated', typically after or during a lot of bittorrent activity that maxes out my bandwith, and my speeds drop markedly, even if the bandwith isn't currently being maxed out. I'm not sure whether it's my ISP throttling my connection or something else, but as a work around, I typically just disconnect my modem from the outlet and then replug to restore normal speeds.
Is there a way to 'restart' my modem from the command line in a similar way without having to physically turn off my modem to get the desired effect?
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
Failed to fetch [URL] Could not connect to 127.0.0.1:8118 (127.0.0.1). - connect (111 Connection refused)----when tor and polipo are not running---
Possible causes:
I just installed tor, privoxy, and polipo and set them up for web browsing anonymity. Other than that I don't recall making any system wide changes.
Other Info:
I can access the internet via a web browser and other programs just fine because i can manually edit each program's internet connection settings. apt-get works when tor and polipo are running. I have used tor and privoxy/polipo in the past and this has never been a problem, so I must have done something different this go around. Obviously I am not sure what that is. Attached are the applicable config files.
How to set up internet сonnection in ubuntu...I have TCP / IP connection through the network card
View 9 Replies View RelatedI am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
View 7 Replies View RelatedI recently installed ubuntu studio 9.10 amd64 on my MBP 5,3 I need an internet connection for updates and to customise my system etc I tried to connect with a wired connection but for some reason I could not configure the ethernet interface. I tried to install the broadcom bcmwl-kernel-source driver by downloading it on another computer and then using a usb stick to transfer it. I had to go through installing several dependencies including dkms and linux-headers-generic. When I finally succeeded the driver showed up in Hardware privers as proprietry but was inactive. Whenever I try to active it I hit 'Activat' I authenticate and the nothing happens. It remains inactive. The wired connection is not readily available to me so it would be great if it was possible to solve this either via a usb or cd.
View 1 Replies View RelatedI'm running Kubuntu 10.4, and I'm having a really slow Internet connection, with Windows everything works fine.
When I upload a file to an internal Ubuntu server the speed is ok ~15MB/s.
The problem is only with Internet Firefox / synaptic, any program using Internet. Last download done with synaptic display 18KB/s when normally it should be 500.
So I just installed ubuntu from a net install, and updated from the internet and posted on this site through firefox while installing vlc wich just froze at 90%.....
but when I try to add community repos it comes up with errors. And while running a system check it says I have no internet connection...
I'm connected through ethernet on a router wich works with the g5 in the other room running osx, and the pc upstairs running ubuntu meerkat. Now I had this same problem with SUSE 11.1 and worked around it by adding through terminal but I was never able to add from the GUI.
I'm using RedHat Linux. In my friend system have Winxp. I have 2 LAN Cards. I'm using wired Broadband internet. So i want to share my internet connection to my friend system through another one LAN card. How can i do this
View 2 Replies View RelatedI want the wget command to work on my linux machine.This is the output of the uname command on my machine Linux kalpana
Quote:
I get the error -ksh: wget: command not found.So can anyone tell me how do I install the wget utility on my machine.
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI need to know: how do not automatically restart GNU/Linux after a critical system failure(kernel panic). For some reason the pc is rebooted, actually throws the error screen Reboot just moments before, but I can't to read it before you reboot.
View 1 Replies View RelatedI'm trying to come up with a startup init script that will check to see if the system was shut down gracefully, or if it is rebooting from a poweroff or something similar?Anyone know of a way to check for this condition with the least amount of room for false positives or vice versa?My intial thought is just a startup script that will will check for a file on startup, and on a proper reboot/shutdown just touch the file. But id like to avoid that type of script if possible,
View 2 Replies View RelatedAn error occurred during the filesystem check. Dropping you to the shell; the system will reboot when you leave the shell.
Warning -- SELinux is active
Disabling security enforcement for system recovery
Run 'setenforce 1' to reenable
This error message appears in the varlog
The situation is I removed the ADSL card from my desktop as I have no use for it for the moment. I am guessing that the motherboard is still trying to detect the Sangoma ADSL card. What is the best way to resolve this problem, uninstall the drivers for the ADSL card or change the settings in the system configuration files?
The system is not affected by this removal, just get prompted regularly about this error as configured in the kerneloops client.
I'm new to Linux world. I'm using Ubuntu 9.04. I'm unable to go online using Ubuntu because I'm unable to run an executable client application provided by my ISP. I called them and they are not able to help me instlling this client applicatoin for me on my Ubuntu. "I cannot go online untill I install this ISP client application on my Ubuntu." I'm entering my ISPs weblink in this blogpost so that it would be easy for you guys to help me resolving this issue. http://www.spacenetindia.net/download.php This is the weblink where I downloaded that ISP client application from. I clicked on this link and clicked on 24online clients.exe tab located on the left and downloaded linuxclient.gz. Please help me if you find any resolution for this issue. Though I tried downloading Wine but I could not as I cannot go onlnie in Ubuntu. In windows I don't know how to install wine to make it work offline in ubuntu.b
View 14 Replies View RelatedI was having a problem with the keyring asking me for a password after I changed my user password. I googled it and found that since the password changed, I will get asked for the keyring password until I delete ~/.gnome2/keyrings/login.keyring. What happened was that I wasn't paying attention that you had to generate a new keyring password before rebooting.
Now, whenever I try to login via gdm, I get this message: error initiating conversation with authentication system - general failure
How do I get it working again? I can still login from the terminal.
installed ubuntu 9.10.I am from India I use ADSLrouter to get connection in XP windows through WAN main port PPPoE.But after installing Ubuntu 9.10 I could not find my internet connected toMozill Firefox in Ubuntu 9.10.SO please tell me a way how to establish internet connection in Ubuntu 9.10 in a detaled way
View 2 Replies View RelatedI have 3 partitions: 2 linux and 1 windows.
I have been using the 3 OS regularly with no problems. But today suddenly, I had no internet connection with the 2 linux partitions which are complete independent, but no problems with windows. i can keep using the internet under windows with no problems.
I haven't touched any conf files.
I have a usb wifi internet connection.
I just noticed a change in my dmesg file when i start any of my 2 linux partitions.
At the end of the lines I have the following :
I'm having a problem connecting to the Internet on my gNewSense installation. My Internet works fine through Ubuntu and Windows, but not through gNewSense, is there anyway of fixing this? Also, while searching around I found that somebody said I ought to type "dmesg" and copy the results.
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-generic (root@sandbox) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Sep 10 19:00:20 UTC 2009 (Ubuntu 2.6.24-24.59gnewsense9-generic)
[ 0.000000] BIOS-provided physical RAM map:
[Code]...