I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
View 1 RepliesI just upgraded to lucid lynx from karmic koala 64 bit. During the upgrade it complained about grub not working. It said if i didnt know what drive to mount i had to select all of them, which i did. Did i now damage my triple boot ? i had also win7/ winxp on my hd, but altho it says windows 7 in the grub menu if i select it nothing happens just a cursor blinking. I can get into Ubuntu okay. I looked at the forum here and saw someone being advised to get Bootinfo script.
[Code].....
I recently installed ubuntu onto a pc running MS vista. Then I somehow managed to install a second instance of ubuntu. Both of these were on the (drive e Then because of HDD problems, I had to reformat my original drive with MS Vista (drive C). Because of installation problems with ms vista - I ended up installing it onto the drive e: also. But now I can no longer load ubuntu because the "GRUB" loader is missing. So my questions are:
1: How can I restore the "GRUB" loader? So I can access ubuntu again
2: How can I remove/uninstall the second ubuntu installation?
3: Is it possible to have a triple boot system with ms vista / ubuntu 32-bit / ubuntu 64-bit?
i am using windows7 and ubuntu 10.04 in my system and dual booting... now i wanna install fedora 13 along with it ans make it triple boot... so can one pls help me in this process as i havent installed fedora before and i wanna be safe and dont want to loose my Grub or windows bootloader in this process
View 10 Replies View RelatedI have a Mac Mini with OS X that I had dual booted successfully with Windows XP for my family. I am a rookie at all this but learned a lot Googling sites that walked me through things. I got bold and tried to triple boot the Mac Mini with Ubuntu 10.04 using rEfIt. I was following this website. [URL].
MISTAKE #1
All was done to the letter until I accidentally realized I had clicked install on step 8 before I clicked "Advanced" to check off the "Install Boot Loader" and changing the device to the partition I had made for Ubuntu (/dev/sda3/). It finished installing and rebooted with the rEFIt screen with Mac / Ubuntu /Windows icons. Mac started, but both Windows and Ubuntu showed a black screen with blinking underscore in the top left of the screen. I went back to the Mac OS and in Disk Utility I noticed that the Linux-Ubuntu name on the partition I had made changed to "DiskOS3".
Mistake #2
I panicked and used "Erase" in Disk Utility on that partition using the Zero Out Data security Erase option.
Mistake #3
Then I reinstalled the Ubuntu 10.04 cd into the drive and did the install boot loader steps. It started up but the rEFIt screen now has Mac/ two Ubuntu penguins/ and Windows icons. Mac starts and works, but both ubuntu icons and Windows leads to the black screen with blincking underscore cursor.
Here are specs and data for hard drive below:
Hardware Overview:
Model Name: Mac Mini
Model Identifier: Mac Mini3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM31.0081.B06
SMC Version (system): 1.35f0 .....
I need some help creating a triple boot system, I have already installed XP and W7, now I am installing Fedora 12 (this is for work so unfortunately it has to be like that). Now the problem is that I want it to show all the partitions in GRUB. Right now it works by going to GRUB first, when selecting Windows it jumps to the Win7 boot manager.
I tried to have them all in one but it seems like the addresses I used in GRUB did not work cause it keeps directing me to the Win7 BM. BTW I am using a single drive with 3 different logical partitions.
I currently use my PC for work, music [I'm a DJ by profession], and gaming. It's got good specs and I've recently gotten a 500GB hard drive for it. I've installed Ubuntu 10.04 [using the 9.10 CD and running update-manager --devel-release]. However, in my infinite foresight, I installed Ubuntu to take up the whole drive, /home and all. I've only used about 80GB of space in /home so backing it up to start off a triple boot shouldn't be a problem.
Currently, my partitioning is /dev/sda1 at 494GB [ext3, mounted as /], /dev/sda2 is a 6.2GB extended partition, and /dev/sda5 is a 6.2GB swap partition. Basically, I need to do the following things, but don't know the least hacky way around it.
1) Repartition to make the Ubuntu's root filesystem take up ~40GB of space
2) Probably have the swap partition immediately after / (is the other extended partition even necessary?)
3) Install Windows 7 to use for gaming in a 60GB partition
4) Windows XP to use for music production in another 60GB part
5) Have the rest of the space on the hard drive formatted as NTFS & used for documents for Windows 7 (as D:), Windows XP (also as D:), and Ubuntu (used as /home/saxon).
Any pointers? I've searched around but I couldn't find anyone else with my exact problem - most people have Windows installed first and only want a dual boot. I'm fairly comfortable with the shell so I'm not too bothered about using Term either. Sorry if I've worded this awfully or seemed like a bit of an idiot
'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB
Windows 7 - 167 GB
Ubuntu - Maverick - 73 GB
Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
I'm currently on a work trip with my Asus G72GX laptop for non-work use (I'm posting from my work laptop). Yesterday, I accidentally booted into my laptop's recovery partition (from the Grub2 bootloader). Before I realized that that's what was happening, it booted into some kind of recovery program which ended up in an error. I restarted the laptop and couldn't get into the bootloader anymore. Now, the only thing that comes up is an error -- "error: unknown filesystem." Below that, it gives me the "grub rescue>" prompt. Most of the commands that sites list for grub rescue only return "Unknown command". ls works and lists all of my partitions: (hd0), (hd0,msdos, (hd0,msdos7), etc. down to msdos1. When I "ls (hd0,msdos" (etc, etc) it says "error: unknown filesystem."
I then started looking into booting from a Live Ubuntu USB drive. I've tried 11.04 and 10.04 now and they both do the same thing. I put them on an 8GB flash drive (only 1 at any given time) using Universal USB Installer and was able to get to the Ubuntu menu (Run Ubuntu from this USB, Install Ubuntu on a Hard Disk, etc.) If I try either "Run Ubuntu" or "Install Ubuntu", the screen flickers and comes right back to that menu.BTW, my 3 operating systems are: Windows 7 HP 64-bit, Mythbuntu 10.10 64-bit, and Windows XP 32-bit. Laptop hardware: Core 2 Duo P8700 2.53GHz, 6GB RAM, Nvidia 8800 GTX video card.
best/simplest way to back up my triple-boot machine, which has Karmic 32-bit, Karmic 64-bit and Windows 7 (64-bit) installed on 3 equal slices of the internal 1TB disk. There are a total of 6 partitions (1 primary+1 logical partition each for the two Karmic, and 2 primary partitions for Win7), and I would like to back it up on an external disk such that the whole system can be restored as-is by writing over the disk. I guess this means correctly backing up data+partition table+MBR, and I would also prefer backing up only the used portion of the disk (rather than creating a 1TB mostly empty image file).
To my knowledge the only way to reliably do this is with "dd" command, but I have never used it ("fsarchiver" seems to be the next best option, but it cannot back up MBR yet; and "partimage" does not have ext4 support). As described here and here, I should run the following commands from a live boot:
1) To back up entire data in compressed format (using 1MB read block to speed up the process):
dd if=/dev/sda bs=1MB | gzip > /backup/image.gz
2) To back up MBR+partition table (stored within the first 512 bytes of the disk):
dd if=/dev/sda bs=512 count=1 of=/backup/image.mbr
3) To restore data:
gzip -dc /backup/image.gz | dd of=/dev/sda
4) To restore MBR+partition table:
dd if=/backup/image.mbr of=/dev/sda
Triple-boot system can't find grub/defaults/grub file. Debian lenny on hda2, winsxp hda3, ubuntu10.10 hdb2. All 3 accessible(working). I had to reinstall all Oses, winsxp 2nd after installing Ubuntu this time Grub2 detected and has each os running. I've so far looked at the Debian grubmenu.lst which shows that winsxp is listed but not Ubuntu even though I can boot Ubuntu. I'm sure that grub2 is in control because at boot it shows grub 1.98 also the os selection looks like the 1 in grub2
I examined my partitions using gparted it shows that winsxp is labeled as boot lba. That was sda3.
1. There's grub legacy in debian, ? in winsxp, grub2 in Ubuntu. where did grub2 go? It's menu is not in debian.
2. How do I find it or should I just change the grub that is within Debian to Grub2 & make it the system default and it's at the beginning of the system.
At the time of Ubuntu installation I didn't have access to Debian, due to wins install. So wins partition had boot flag.
3. Is there a way to enable grub legacy and add Ubuntu entries to it?
4. Is it as easy as changing the boot flags to Grub in Debian partition at beginning of hda?
5. Why can't I see default grub file on this installation of Ubuntu?
On this 1 as well as the other I have root login and can't see it.
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies View RelatedI'm brand new to Fedora. I ran the live cd and installed Fedora. I then installed OpenSUSE and Mint. When Mint formated the hard drive, Fedora wasn't in the graphic, even though sda1 was ext4 and sda3 was lvm2. When Mint rebotted, Mint and OpenSUSE were on the menu, but Fedora wasn't.
View 14 Replies View RelatedI have an AMD64 system, which I recently upgraded to Lucid 10.04. The system now fails to boot after the upgrade. Recovery mode makes no difference.
When I attempt to boot, I get a series of messages about file systems needing checking, and also some messages from ureadahead-other. (process terminated status 4), though a post here says that status 4 is in fact not an error.
I have sucessfully booted the Lucid desktop install CD in live CD mode, mounted the filesystems, and started parts of my system in a chroot. In that system I tried running an update, and removing plymouth, but it made no difference. how I can get my system working.
I did take a backup of /etc before I upgraded, so I could get back to a karmic install, but the pain in doing so would be considerable, so I would prefer to avoid that if possible.
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
For completeness here's the history that got me to this point:
Stage 1
/dev/sda - disk with XP OS, set to be first boot disk in BIOS
/dev/sdb - a small data disk to supplement sda
[code]....
I have (only bc i have to) windows vista, also Ubuntu 10.04 on the same drive, and dual-booting is no issue at all. But after I installed Mandriva 2010 to try to triple boot, i couldn't find Ubuntu anymore so I got rid of mandriva, and grub was messed up bc I deleted all mandriva partitions. So then I installed Xubuntu 9.10 (because it is a quick install) to recover grub, and with Xubuntu, Ubuntu, and vista, Grub sees all three OSes no problem. So what would I have to do to make Grub work this way when I install Mandriva?
View 5 Replies View RelatedI want to install a triple boot load consisting of Windows 7, Ubuntu 10.04, and Fedora.My question is, if I install Windows 7, followed by another distro, like Fedora, and then install Ubuntu 10.04, will the Ubuntu GRUB 2 menu display all three options?I know if I install Ubuntu and then install Fedora, I have to go through some heavy gyrations to get everything to show in the load menu, so it seems easier to install Ubuntu last.
View 2 Replies View RelatedIn the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
[Code]...
Yesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
I have a dual boot laptop (Acer Timeline 1830) working fine. I'm running Ubuntu 10.10 and Windows 7 Home Premium Edition. I need to upgrade Windows 7 Home Premium to Windows 7 Professional (Thats Winblows for ya.). My questions: Has anybody here done this upgrade, did it go seamlessly (Didn't destroy your master boot record, etc) and is there anything anything else i should know before doing this upgrade?
View 7 Replies View RelatedI had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
View 1 Replies View RelatedI have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
I i'm having trouble setting up my triple boot machine. I have Windows 7 and Mac OSX on two seperatate hard disks and they are dual booting fine with the chameleon bootloader. I just attempted to install ubuntu from liveCD which i downloaded and burned from the ubuntu website. During intallation i the option to "install side by side to windows" and resized the windows partition to make room for Ubuntu(250GB of 1TB), i also selected the option to disable the GRUB bootloader because i want to use chameleon. The installer completed successfully and the computer rebooted but chameleon, Mac OSX or windows (my partition for windows is 250GB smaller) won't recognize the partition.
View 2 Replies View RelatedI have been searching in preparation to install 10.04.1 with 2 installations of Windows,already installed.(Win 7 then Vista) I have left room at the end of the drive for Ubuntu. When I get to the stage to select the boot options and click on advanced, what should I select?
View 4 Replies View RelatedI installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
View 1 Replies View RelatedI would like to triple boot vista, opensuse and ubuntu.
I need to set aside 165 gb for Vista (which has been backed up to an external drive).
Would like to make a fresh install of Ububtu and Opensuse with Ubunto being the main OS. I figured 100 GB for Ubuntu and 55 GB for Opensuse would probably be fine (the remainder I need to set aside for Vista).
Ive popped in the Ubuntu DVD and am about to install it but am stuck on the "allocate drive space" part. I do not understand how to partition the hd and what to set each partition to in the "Use as" and "Mount Point"
I am attempting to triple boot Ubuntu, Windows 7, and Backtrack 4. Win7 and Ubuntu are both booting and working properly, but after trying a number of configurations for GRUB I cannot boot Backtrack. Everything I attempt seems to come back to one problem and result in the same error: Error 17.
sda contains both my Windows and Ubuntu partitions...
Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x07dccf10
[Code].....
I upgraded from F10 to F12 using preupgrade. The upgrade itself completed with no errors, but I'm unable to boot afterward.
Symptoms:...Grub starts, the initramfs loads, and the system begins to boot. After a few seconds I get error messages for buffer i/o errors on blocks 0-3 on certain dm devices (usually dm0 and dm2, but I can't get a shell to figure out what those are). An error appears from device-mapper that it couldn't read an LVM snapshot's metadata. I get the message to press "I" for interactive startup. UDEV loads and the system tries to mount all filesystems. Errors appear stating that it couldn't mount various LVM partitions. Startup fails due to the mount failure, the system reboots, and the steps repeat.
Troubleshooting done:...I have tried to run preupgrade again (the entry is still in my grub.conf file). The upgrade environment boots, but it fails to find the LVM devices and gives me a question to name my machine just like for a fresh install. I also tried booting from the full install DVD, but I get the same effect. Suspecting that the XFS drivers weren't being included, I have run dracut to create a new initramfs, making sure the XFS module was included. I have loaded the preupgrade environment and stopped at the initial GUI splash screen to get to a shell prompt. From there I can successfully assemble the raid arrays, activate the volume group, and mount all volumes -- all my data is still intact (yay!). I've run lvdisplay to check the LVM volumes, and most (all?) appear to have different UUIDs than what was in /etc/fstab before the upgrade -- not sure if preupgrade or a new LVM package somehow changed the UUIDs. I have modified my root partition's /etc/fstab to try calling the LVM volumes by name instead of UUID, but the problem persists (I also make sure to update the initramfs as well). From the device-mapper and I/O errors above, I suspect that either RAID or LVM aren't starting up properly, especially since prior OS upgrades had problems recognizing RAID/LVM combinations (it happened so regularly that I wrote a script so I could do a mkinitrd with the proper options running under SystemRescueCD with each upgrade).
I have tried booting with combinations of the rootfstype, rdinfo, rdshell, and rdinitdebug parameters, but the error happens so early in the startup process that the messages quickly scroll by and I just end up rebooting.
System details:4 1-TB drives set up in two RAID 1 pairs. FAT32 /boot partition RAIDed on the first drive pair. Two LVM partitions -- one RAIDed on the second drive pair and one on the remainder of the first drive pair. Root and other filesystems are in LVM; most (including /) are formatted in XFS.
I've made some progress in diagnosing the issue. The failure is happening because the third RAID array (md2) isn't being assembled at startup. That array contains the second physical volume in the LVM volume group, so if it doesn't start then several mount points can't be found.
The RAID array is listed in my /etc/mdadm.conf file and identified by its UUID but the Fedora 12 installer won't detect it by default. Booting the DVD in rescue mode does allow the filesystems to be detected and mounted, but the RAID device is set to be /dev/md127 instead of /dev/md2.
The arrays are on an MSI P35 motherboard (Intel ICH9R SATA chipset) but I'm using LInux software RAID. The motherboard is configured for AHCI only. This all worked correctly in Fedora 10.
I've just upgraded to Natty. During the upgrade no errors showed. However, when I now boot ubuntu (either recovery mode or normal), the boot process hangs at:
'checking battery state'
I searched for similair problems in this forum, but the solutions in other posts(sudo apt-get update & upgrade etc.) did not help. I'm not sure if it is related or important, but when it hangs, it also shows something like:
'starting automatic crash reporter [fail]'
'not starting jetty'
'saned disabled'
(I can't copy there of course, so it is probably not exactly like this, or in this order...) What can I do to get my ubuntu boot again?