Fedora Installation :: Triple Boot With Three Drives
Mar 11, 2009
I have a dual boot with vista on disk 0 and ubuntu on disk1. I just installed a disk 2 that I would like to use to try out other distros. Ubuntu is the only linux experience I have had. I'm really not very good at all of this, so my questions before I start loading another distro are:
1. Does Fedora use GRUB as its installer?
2. When I installed ubuntu on disk 1 (sdb1), the install was very simple. I chose sdb1 for the install, it loaded it, and when it was done I simply had the choice of which drive to boot into. Will installing Fedora on disk 2 (sdc1) be just as simple, or will I encounter steps I must take to make it so that I have a choice of which disk/OS to boot into?
View 3 Replies
ADVERTISEMENT
Mar 25, 2009
I now have a triple boot on triple drives with Vista on sda, Ubuntu on sdb, and PCLinuxOS on sdc.When I installed PCLinuxOS on sdc, I installed the bootloader in the first sector of partition 1 of sdc so that I could keep using the Grub bootloader that installed with Ubuntu.Everything is working fine at the moment.I now want install Fedora 10 on sdc for experimentation. I have used gparted to create another partition on sdc to install Fedora 10, so my question is 'What and where exactly should I put in the /boot/grub/menu.lst of my original bootloader to get to Fedora?'
View 14 Replies
View Related
Sep 16, 2015
I have an HP Elitebook 8540w with 500gb hdd running win7.I plan to replace my blue-ray drive with an ssd using a hhd caddy. The problem is that i want to keep my first hdd (win7) as it is, and install on the new ssd 2 operating systems:win10 and debian 8.
View 3 Replies
View Related
Apr 13, 2011
I'm not exactly a newbie to Linux and it's OS, I have been using Ubuntu since the 8.xx release. I have two hard drives in my system, Hard Drive #1 is the primary drive and is 250GB, this hard drive is only used for Windows 7 Pro 64bit. The second hard drive is 320GB and split into two partitions. The first half has Windows XP Pro on it and the second partition has Ubuntu 10.04 on it. Both are split evenly at 160GB each. Here's how I did it, I first started by loading Windows XP Pro onto second hard drive, using the entire drive, once all updates and settings were applied I then installed Windows 7 Pro 64bit onto the first hard drive and used it fully. Once all settings and updates were applied I restarted the computer and it loaded directly into Win7, which is to be expected. I opened my computer, browsed through the second drive to make sure all files were intact.
I then downloaded and created a USB installation drive for Ubuntu 10.04. After the creation of the USB drive I proceeded to install Ubuntu 10.04 on my second drive, using half the space for Windows XP Pro, and half the space for Ubuntu 10.04. After that was all setup and done, I restarted one last time. Low and behold Ubuntu 10.04 and Windows 7 both appear on the boot menu, however Windows XP Pro does not. I panicked for a few short seconds but after logging into Windows 7 I realized all my XP Pro files where safe. So now I have 2 hard drives with 3 operating systems. Hard drive one has Windows 7 only and hard drive 2 is split between XP Pro and Ubuntu. However I cannot get Windows XP Pro added to the boot menu no matter how hard I try. I'm not entirely confident using the terminal as I am just starting to learn programming, but I know how to enter the commands and get things moving.
Every website that I look at tells me I need to start by editing some grub/menu.lsd, which for some reason does not exist or is "invalid directory". Some websites say I need to run "sudo apt-get grub-update", which again is an invalid command. Here's what I need. A step by step tutorial on how to add my XP into the loading menu. Example of step by step includes "Step 1: Open Terminal" and etc... It needs to be basic and down to earth. Don't just tell me to run codes and type a bunch of junk because that doesn't seem to work for me. I do not know what (hd,0) or (hd,1) means, but assuming the websites are correct, (hd,0) would be my Windows 7 HD and (hd,1) would be my Windows XP/Ubuntu HD?
View 14 Replies
View Related
Oct 2, 2009
I have a windows vista and fedora 11 64 bit dual boot. my diskstructure is as follows:
I have a swap of 6 gb.
I dont want to loose any of my existing OS's.
View 1 Replies
View Related
Jan 27, 2010
I am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies
View Related
May 25, 2010
i am using windows7 and ubuntu 10.04 in my system and dual booting... now i wanna install fedora 13 along with it ans make it triple boot... so can one pls help me in this process as i havent installed fedora before and i wanna be safe and dont want to loose my Grub or windows bootloader in this process
View 10 Replies
View Related
Feb 1, 2009
I have triple boot pc (xp, ubuntu, and fedora), installed in that order. xp and ubuntu seem to be stable. i have had to pull the power cord 3 or 4 times while booted in fedora. i noticed the last 2 times i can still move the mouse around, but can't get it to open anything. the keyboard is locked up, can't alt-f1 or f2 or anything to get console. can't get it to do anything, other than watch the mouse tail move around (weird).
i installed a new power supply (and at least i now have a power switch - the old one never had one), but that didn't fix the lock up problem. i haven't ran yum update since the fc10 live cd gnome install. was planning on doing that later.. not sure how long it will stay up to download all the 300 or so updates. right now the only thing open is a terminal (can't type in it).. what should i look at to fix this lock up problem?
View 6 Replies
View Related
May 29, 2010
I am triple booting
Windows xp
UBUNTU 10.04
Fedora 13
Everything works fine, the setup went very well. But I got to thinking (A dangerous thing for me). In Ubuntu I am using separate partitions for / (root) and /home. I was wondering, during install of Fedora, could I use the separate partition I am using now for both root and /home for just / (root) and use the Ubuntu /home partition for Fedora (set the mount point for /home to the same partition as I did for Ubuntu and not format the drive)? This would allow me to seamlessly use the /home partition and not require duplication of files. I can mount the Ubuntu /home dir while in Fedora.I can share the /home partition with two different installs of Ubuntu (been there).
View 1 Replies
View Related
Jun 8, 2010
I need some help creating a triple boot system, I have already installed XP and W7, now I am installing Fedora 12 (this is for work so unfortunately it has to be like that). Now the problem is that I want it to show all the partitions in GRUB. Right now it works by going to GRUB first, when selecting Windows it jumps to the Win7 boot manager.
I tried to have them all in one but it seems like the addresses I used in GRUB did not work cause it keeps directing me to the Win7 BM. BTW I am using a single drive with 3 different logical partitions.
View 3 Replies
View Related
Jan 14, 2010
I had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
View 1 Replies
View Related
Mar 7, 2009
I have an Intel DG33TL MB, Intel Core 2 Quad Q9650, 8GB SuperTalent DDR2-800, and 4 Seagate 500GB hard disks. The disks are connected to a 3Ware 9650SE-4LPML and set for RAID0. I partitioned the drive in the following manner: 900GB for XP-Pro x64 (first install), 100 GB XP-Pro (installed second), and the remaining for FC10. After installing FC10 x64 using downloaded DVD .iso I am getting the following error on reboot:
Code:
Reading all physical volumes. This may take a while...
Volume group "VolGroup00" not found.
[code]....
View 1 Replies
View Related
May 1, 2010
I had a dual boot working fine with XP and F12 on two physical drives, all was well. Last night my friend helped upgrade my system, I now have 3 drives (20gig F12) (60gig XP) and (320gig Win7) now the PC only loads Win7 as I think my friend told bios to boot from 320gig. Has anybody here got experience with triple boot from 3 drives? Here is my guess, tell bios to boot from other drive and add Win7 to grub. Not sure how but that's my guess. Also what worries me is that win7 does not "see" the other two drives.
View 5 Replies
View Related
Mar 11, 2010
I'm brand new to Fedora. I ran the live cd and installed Fedora. I then installed OpenSUSE and Mint. When Mint formated the hard drive, Fedora wasn't in the graphic, even though sda1 was ext4 and sda3 was lvm2. When Mint rebotted, Mint and OpenSUSE were on the menu, but Fedora wasn't.
View 14 Replies
View Related
Sep 10, 2010
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies
View Related
Feb 24, 2009
I've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
View 9 Replies
View Related
Jan 3, 2010
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
View 1 Replies
View Related
Feb 5, 2010
For completeness here's the history that got me to this point:
Stage 1
/dev/sda - disk with XP OS, set to be first boot disk in BIOS
/dev/sdb - a small data disk to supplement sda
[code]....
View 4 Replies
View Related
Sep 11, 2010
I have (only bc i have to) windows vista, also Ubuntu 10.04 on the same drive, and dual-booting is no issue at all. But after I installed Mandriva 2010 to try to triple boot, i couldn't find Ubuntu anymore so I got rid of mandriva, and grub was messed up bc I deleted all mandriva partitions. So then I installed Xubuntu 9.10 (because it is a quick install) to recover grub, and with Xubuntu, Ubuntu, and vista, Grub sees all three OSes no problem. So what would I have to do to make Grub work this way when I install Mandriva?
View 5 Replies
View Related
Dec 21, 2010
I want to install a triple boot load consisting of Windows 7, Ubuntu 10.04, and Fedora.My question is, if I install Windows 7, followed by another distro, like Fedora, and then install Ubuntu 10.04, will the Ubuntu GRUB 2 menu display all three options?I know if I install Ubuntu and then install Fedora, I have to go through some heavy gyrations to get everything to show in the load menu, so it seems easier to install Ubuntu last.
View 2 Replies
View Related
May 3, 2010
I used debian several years ago, and I'm interested in trying it out again.Right now, I have a laptop running Windows Vista and Ubuntu 9.10 in a dual boot configuration. Here is the output ofsudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
240 heads, 63 sectors/track, 41345 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
[code]....
View 6 Replies
View Related
Dec 26, 2010
I recently bought a netbook on which Windows 7 Start Edition was installed. I partitioned the disk to install 2 other linux distributions : Backtrack 4 and Debian Lenny. Here is my partition scheme :
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc6a9bf3e
[Code]...
Partition table entries are not in disk order During both of the installs, I chose to install Grub. Unfortunately, when I start my netbook, it launches Windows 7 automatically and I do not see grub...
View 6 Replies
View Related
Mar 14, 2010
I recently installed ubuntu onto a pc running MS vista. Then I somehow managed to install a second instance of ubuntu. Both of these were on the (drive e Then because of HDD problems, I had to reformat my original drive with MS Vista (drive C). Because of installation problems with ms vista - I ended up installing it onto the drive e: also. But now I can no longer load ubuntu because the "GRUB" loader is missing. So my questions are:
1: How can I restore the "GRUB" loader? So I can access ubuntu again
2: How can I remove/uninstall the second ubuntu installation?
3: Is it possible to have a triple boot system with ms vista / ubuntu 32-bit / ubuntu 64-bit?
View 5 Replies
View Related
Mar 14, 2010
I have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
View 2 Replies
View Related
Apr 29, 2010
I i'm having trouble setting up my triple boot machine. I have Windows 7 and Mac OSX on two seperatate hard disks and they are dual booting fine with the chameleon bootloader. I just attempted to install ubuntu from liveCD which i downloaded and burned from the ubuntu website. During intallation i the option to "install side by side to windows" and resized the windows partition to make room for Ubuntu(250GB of 1TB), i also selected the option to disable the GRUB bootloader because i want to use chameleon. The installer completed successfully and the computer rebooted but chameleon, Mac OSX or windows (my partition for windows is 250GB smaller) won't recognize the partition.
View 2 Replies
View Related
May 12, 2010
I just upgraded to lucid lynx from karmic koala 64 bit. During the upgrade it complained about grub not working. It said if i didnt know what drive to mount i had to select all of them, which i did. Did i now damage my triple boot ? i had also win7/ winxp on my hd, but altho it says windows 7 in the grub menu if i select it nothing happens just a cursor blinking. I can get into Ubuntu okay. I looked at the forum here and saw someone being advised to get Bootinfo script.
[Code].....
View 9 Replies
View Related
Jul 30, 2010
I have been searching in preparation to install 10.04.1 with 2 installations of Windows,already installed.(Win 7 then Vista) I have left room at the end of the drive for Ubuntu. When I get to the stage to select the boot options and click on advanced, what should I select?
View 4 Replies
View Related
Sep 20, 2010
I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
View 1 Replies
View Related
Nov 10, 2010
I installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
View 1 Replies
View Related
Jul 31, 2011
I would like to triple boot vista, opensuse and ubuntu.
I need to set aside 165 gb for Vista (which has been backed up to an external drive).
Would like to make a fresh install of Ububtu and Opensuse with Ubunto being the main OS. I figured 100 GB for Ubuntu and 55 GB for Opensuse would probably be fine (the remainder I need to set aside for Vista).
Ive popped in the Ubuntu DVD and am about to install it but am stuck on the "allocate drive space" part. I do not understand how to partition the hd and what to set each partition to in the "Use as" and "Mount Point"
View 3 Replies
View Related
