Ubuntu Installation :: Triple Boot System With Ms Vista / 32-bit?
Mar 14, 2010
I recently installed ubuntu onto a pc running MS vista. Then I somehow managed to install a second instance of ubuntu. Both of these were on the (drive e Then because of HDD problems, I had to reformat my original drive with MS Vista (drive C). Because of installation problems with ms vista - I ended up installing it onto the drive e: also. But now I can no longer load ubuntu because the "GRUB" loader is missing. So my questions are:
1: How can I restore the "GRUB" loader? So I can access ubuntu again
2: How can I remove/uninstall the second ubuntu installation?
3: Is it possible to have a triple boot system with ms vista / ubuntu 32-bit / ubuntu 64-bit?
View 5 Replies
ADVERTISEMENT
Oct 2, 2009
I have a windows vista and fedora 11 64 bit dual boot. my diskstructure is as follows:
I have a swap of 6 gb.
I dont want to loose any of my existing OS's.
View 1 Replies
View Related
Aug 8, 2010
How would I install OSX on my PC so it would still boot to GRUB? And how would I add OSX to GRUB? Or should I use some other bootloader?
View 4 Replies
View Related
Sep 20, 2010
I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
View 1 Replies
View Related
Nov 30, 2009
i'm trying to make my imac capable of triple boot.the software i use are:
mac os x 10.5.8
win vista sp1
linux opensuse 11.2
[code]....
View 9 Replies
View Related
May 25, 2010
i am using windows7 and ubuntu 10.04 in my system and dual booting... now i wanna install fedora 13 along with it ans make it triple boot... so can one pls help me in this process as i havent installed fedora before and i wanna be safe and dont want to loose my Grub or windows bootloader in this process
View 10 Replies
View Related
Sep 19, 2010
I have a Mac Mini with OS X that I had dual booted successfully with Windows XP for my family. I am a rookie at all this but learned a lot Googling sites that walked me through things. I got bold and tried to triple boot the Mac Mini with Ubuntu 10.04 using rEfIt. I was following this website. [URL].
MISTAKE #1
All was done to the letter until I accidentally realized I had clicked install on step 8 before I clicked "Advanced" to check off the "Install Boot Loader" and changing the device to the partition I had made for Ubuntu (/dev/sda3/). It finished installing and rebooted with the rEFIt screen with Mac / Ubuntu /Windows icons. Mac started, but both Windows and Ubuntu showed a black screen with blinking underscore in the top left of the screen. I went back to the Mac OS and in Disk Utility I noticed that the Linux-Ubuntu name on the partition I had made changed to "DiskOS3".
Mistake #2
I panicked and used "Erase" in Disk Utility on that partition using the Zero Out Data security Erase option.
Mistake #3
Then I reinstalled the Ubuntu 10.04 cd into the drive and did the install boot loader steps. It started up but the rEFIt screen now has Mac/ two Ubuntu penguins/ and Windows icons. Mac starts and works, but both ubuntu icons and Windows leads to the black screen with blincking underscore cursor.
Here are specs and data for hard drive below:
Hardware Overview:
Model Name: Mac Mini
Model Identifier: Mac Mini3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM31.0081.B06
SMC Version (system): 1.35f0 .....
View 1 Replies
View Related
Jun 8, 2010
I need some help creating a triple boot system, I have already installed XP and W7, now I am installing Fedora 12 (this is for work so unfortunately it has to be like that). Now the problem is that I want it to show all the partitions in GRUB. Right now it works by going to GRUB first, when selecting Windows it jumps to the Win7 boot manager.
I tried to have them all in one but it seems like the addresses I used in GRUB did not work cause it keeps directing me to the Win7 BM. BTW I am using a single drive with 3 different logical partitions.
View 3 Replies
View Related
Apr 27, 2010
I currently use my PC for work, music [I'm a DJ by profession], and gaming. It's got good specs and I've recently gotten a 500GB hard drive for it. I've installed Ubuntu 10.04 [using the 9.10 CD and running update-manager --devel-release]. However, in my infinite foresight, I installed Ubuntu to take up the whole drive, /home and all. I've only used about 80GB of space in /home so backing it up to start off a triple boot shouldn't be a problem.
Currently, my partitioning is /dev/sda1 at 494GB [ext3, mounted as /], /dev/sda2 is a 6.2GB extended partition, and /dev/sda5 is a 6.2GB swap partition. Basically, I need to do the following things, but don't know the least hacky way around it.
1) Repartition to make the Ubuntu's root filesystem take up ~40GB of space
2) Probably have the swap partition immediately after / (is the other extended partition even necessary?)
3) Install Windows 7 to use for gaming in a 60GB partition
4) Windows XP to use for music production in another 60GB part
5) Have the rest of the space on the hard drive formatted as NTFS & used for documents for Windows 7 (as D:), Windows XP (also as D:), and Ubuntu (used as /home/saxon).
Any pointers? I've searched around but I couldn't find anyone else with my exact problem - most people have Windows installed first and only want a dual boot. I'm fairly comfortable with the shell so I'm not too bothered about using Term either. Sorry if I've worded this awfully or seemed like a bit of an idiot
View 2 Replies
View Related
Apr 5, 2010
On installing a dual boot XP/OS 11.2 on a 40GB HDD, I had no problems with the partitioning, but now I have installed XP (15GB) and Vista (20GB), the OS 11.2 setup insists on shrinking the Vista partition to 15GB and does not allow me to change this.Have tried going into 'Create Partition Setup' and 'Custom Partition Setup' but can't seem to get Vista back to its original size
View 1 Replies
View Related
Oct 28, 2010
'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB
Windows 7 - 167 GB
Ubuntu - Maverick - 73 GB
Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
View 14 Replies
View Related
Jun 15, 2011
I have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
View 9 Replies
View Related
May 10, 2011
I'm currently on a work trip with my Asus G72GX laptop for non-work use (I'm posting from my work laptop). Yesterday, I accidentally booted into my laptop's recovery partition (from the Grub2 bootloader). Before I realized that that's what was happening, it booted into some kind of recovery program which ended up in an error. I restarted the laptop and couldn't get into the bootloader anymore. Now, the only thing that comes up is an error -- "error: unknown filesystem." Below that, it gives me the "grub rescue>" prompt. Most of the commands that sites list for grub rescue only return "Unknown command". ls works and lists all of my partitions: (hd0), (hd0,msdos, (hd0,msdos7), etc. down to msdos1. When I "ls (hd0,msdos" (etc, etc) it says "error: unknown filesystem."
I then started looking into booting from a Live Ubuntu USB drive. I've tried 11.04 and 10.04 now and they both do the same thing. I put them on an 8GB flash drive (only 1 at any given time) using Universal USB Installer and was able to get to the Ubuntu menu (Run Ubuntu from this USB, Install Ubuntu on a Hard Disk, etc.) If I try either "Run Ubuntu" or "Install Ubuntu", the screen flickers and comes right back to that menu.BTW, my 3 operating systems are: Windows 7 HP 64-bit, Mythbuntu 10.10 64-bit, and Windows XP 32-bit. Laptop hardware: Core 2 Duo P8700 2.53GHz, 6GB RAM, Nvidia 8800 GTX video card.
View 4 Replies
View Related
Jun 14, 2010
best/simplest way to back up my triple-boot machine, which has Karmic 32-bit, Karmic 64-bit and Windows 7 (64-bit) installed on 3 equal slices of the internal 1TB disk. There are a total of 6 partitions (1 primary+1 logical partition each for the two Karmic, and 2 primary partitions for Win7), and I would like to back it up on an external disk such that the whole system can be restored as-is by writing over the disk. I guess this means correctly backing up data+partition table+MBR, and I would also prefer backing up only the used portion of the disk (rather than creating a 1TB mostly empty image file).
To my knowledge the only way to reliably do this is with "dd" command, but I have never used it ("fsarchiver" seems to be the next best option, but it cannot back up MBR yet; and "partimage" does not have ext4 support). As described here and here, I should run the following commands from a live boot:
1) To back up entire data in compressed format (using 1MB read block to speed up the process):
dd if=/dev/sda bs=1MB | gzip > /backup/image.gz
2) To back up MBR+partition table (stored within the first 512 bytes of the disk):
dd if=/dev/sda bs=512 count=1 of=/backup/image.mbr
3) To restore data:
gzip -dc /backup/image.gz | dd of=/dev/sda
4) To restore MBR+partition table:
dd if=/backup/image.mbr of=/dev/sda
View 8 Replies
View Related
Jun 26, 2009
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
View 6 Replies
View Related
Mar 18, 2011
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies
View Related
Oct 22, 2010
Triple-boot system can't find grub/defaults/grub file. Debian lenny on hda2, winsxp hda3, ubuntu10.10 hdb2. All 3 accessible(working). I had to reinstall all Oses, winsxp 2nd after installing Ubuntu this time Grub2 detected and has each os running. I've so far looked at the Debian grubmenu.lst which shows that winsxp is listed but not Ubuntu even though I can boot Ubuntu. I'm sure that grub2 is in control because at boot it shows grub 1.98 also the os selection looks like the 1 in grub2
I examined my partitions using gparted it shows that winsxp is labeled as boot lba. That was sda3.
1. There's grub legacy in debian, ? in winsxp, grub2 in Ubuntu. where did grub2 go? It's menu is not in debian.
2. How do I find it or should I just change the grub that is within Debian to Grub2 & make it the system default and it's at the beginning of the system.
At the time of Ubuntu installation I didn't have access to Debian, due to wins install. So wins partition had boot flag.
3. Is there a way to enable grub legacy and add Ubuntu entries to it?
4. Is it as easy as changing the boot flags to Grub in Debian partition at beginning of hda?
5. Why can't I see default grub file on this installation of Ubuntu?
On this 1 as well as the other I have root login and can't see it.
View 32 Replies
View Related
Apr 6, 2011
I installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
View 6 Replies
View Related
Sep 10, 2010
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies
View Related
May 15, 2010
My laptop had Vista, I installed Lucid so I'm dualbooting with GRUB, and I'm wondering if anybody knows of a way to triple-boot with Mac OSX. Thanks in advance.
View 1 Replies
View Related
Mar 11, 2010
I'm brand new to Fedora. I ran the live cd and installed Fedora. I then installed OpenSUSE and Mint. When Mint formated the hard drive, Fedora wasn't in the graphic, even though sda1 was ext4 and sda3 was lvm2. When Mint rebotted, Mint and OpenSUSE were on the menu, but Fedora wasn't.
View 14 Replies
View Related
Jan 3, 2010
I have XP on sda1, Fedora 11 encrypted on sdb 1 (boot) and sdb 2 (root), I would like Ubuntu on sdc 1 (boot) sdc 2 (root). However when I tried to install from the cd the partition manager does not see my Fedora as an OS (I assume because it is encrypted). So my question is how can I achieve my triple boot without having to have my Fedora unencrypted. I want it encrypted for a reason.
Also I cancelled the installation for Ubuntu and it reverted to a Live cd and I tried to mount my Fedora encrypted drive. Ubuntu asked for the pass and when I entered it I get an error saying it cannot be mounted because it is not a mountable file system. This is not good for me because I would like to be able to access all my hdd's from both distro's.
View 1 Replies
View Related
Feb 5, 2010
For completeness here's the history that got me to this point:
Stage 1
/dev/sda - disk with XP OS, set to be first boot disk in BIOS
/dev/sdb - a small data disk to supplement sda
[code]....
View 4 Replies
View Related
Sep 11, 2010
I have (only bc i have to) windows vista, also Ubuntu 10.04 on the same drive, and dual-booting is no issue at all. But after I installed Mandriva 2010 to try to triple boot, i couldn't find Ubuntu anymore so I got rid of mandriva, and grub was messed up bc I deleted all mandriva partitions. So then I installed Xubuntu 9.10 (because it is a quick install) to recover grub, and with Xubuntu, Ubuntu, and vista, Grub sees all three OSes no problem. So what would I have to do to make Grub work this way when I install Mandriva?
View 5 Replies
View Related
Dec 21, 2010
I want to install a triple boot load consisting of Windows 7, Ubuntu 10.04, and Fedora.My question is, if I install Windows 7, followed by another distro, like Fedora, and then install Ubuntu 10.04, will the Ubuntu GRUB 2 menu display all three options?I know if I install Ubuntu and then install Fedora, I have to go through some heavy gyrations to get everything to show in the load menu, so it seems easier to install Ubuntu last.
View 2 Replies
View Related
Jan 14, 2010
I had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
View 1 Replies
View Related
Mar 14, 2010
I have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
View 2 Replies
View Related
Apr 29, 2010
I i'm having trouble setting up my triple boot machine. I have Windows 7 and Mac OSX on two seperatate hard disks and they are dual booting fine with the chameleon bootloader. I just attempted to install ubuntu from liveCD which i downloaded and burned from the ubuntu website. During intallation i the option to "install side by side to windows" and resized the windows partition to make room for Ubuntu(250GB of 1TB), i also selected the option to disable the GRUB bootloader because i want to use chameleon. The installer completed successfully and the computer rebooted but chameleon, Mac OSX or windows (my partition for windows is 250GB smaller) won't recognize the partition.
View 2 Replies
View Related
May 12, 2010
I just upgraded to lucid lynx from karmic koala 64 bit. During the upgrade it complained about grub not working. It said if i didnt know what drive to mount i had to select all of them, which i did. Did i now damage my triple boot ? i had also win7/ winxp on my hd, but altho it says windows 7 in the grub menu if i select it nothing happens just a cursor blinking. I can get into Ubuntu okay. I looked at the forum here and saw someone being advised to get Bootinfo script.
[Code].....
View 9 Replies
View Related
Jul 30, 2010
I have been searching in preparation to install 10.04.1 with 2 installations of Windows,already installed.(Win 7 then Vista) I have left room at the end of the drive for Ubuntu. When I get to the stage to select the boot options and click on advanced, what should I select?
View 4 Replies
View Related
