CentOS 5 :: Installation On IBM ISeries Model 525/520?
Oct 14, 2010Is it possible I can install CentOS 5.3 version on IBM iSeries/eServer model 525/520.
how I will be able to perform this installation.
ADVERTISEMENT
CentOS 5 Hardware :: SuperMicro / CentOS Compatibility - Specific Model 1026TT-TF
Sep 4, 2010I am looking into 1026TT-TF and 6016TT-TF for a CentOS 5.4 or 5.5 64bit installation:
SuperMicro 6016TT-TF
SuperMicro 1026TT-TF
It will be used as a Web-server mostly. Since they are twin nodes, one node will be one strong firewall. I have been checking all over and I can't find any driver, bios, or issues with this specific motherboard from Supermicro and Intel 5500/5600 series CPUs. Is there anything that would concern you with these servers?
I am also looking to put in a 4-port Gigabit LAN card into one node which I doubt makes any difference in the whole equation. Further more, and most importantly, the first one takes only 2.5" HDDs and the second option accepts 3.5" HDDs. Other than size availability and price, are there any concerns regarding performance when chosing one over the other? System which accepts 3.5" HDDs only takes two per node so I have to opt for 1TB drives. For the 2.5" system I can go with 4 of 2.5" HDDs of 500GB in size. Either of options selected will be setup in RAID-1.
CentOS 5 Hardware :: How To Install D-Link Model:DU-562M USB Modem
Oct 29, 2009i'm currently having trouble installing my D-Link DU-562M USB Modem in Centos 5.3. That is, my modem is not detected. When i issue the command ls /dev/tty*, i can't see any node pertaining to /dev/ttyUSB0 or more.. what should i do to make my modem work?
View 17 Replies View RelatedOpenSUSE :: Ssh And Sftp SLES With Iseries Client?
Jan 27, 2011I have a sles 10 server that I need an iseries 5 client to make an sftp connection to. I'm getting the following error in the /var/logs/message log:
[Code]...
General :: ISeries 270 V5R4 Connection To Internet?
Feb 8, 2011I want to host a web site on my iSeries. I have configured the TCP/IP Interfaces, routes & host table entries:
[Code]...
Ubuntu Installation :: Pc Model Seems To Restrict All
Apr 8, 2011Prior to purchasing this Toshiba L675D I was able on my old HP to explore other distros, but there seems to be some incomparability existing with this model that restricts 10.10 but accepts 10.04, kernel thing I assume. But in all other attempts to install, Mint, open Suse etc it loads the kernel then the Live CD freezes on a black screen blinking cursor. Have tried nomodeset with no success. Obviously Toshiba is no help with Linux and win 7 forum even cautions against creating an extended partition. Oh out of the box this baby had 3 primaries, one a recovery and hidden. Just an FYI
View 1 Replies View RelatedFedora Installation :: Mce Remote Contro Model 1039?
May 27, 2009I have installed fedora 10 with mythtv. at some point the remote control was working then i had to reimage the computer again. Now the remote wont work Im not a linux guru this is why is so dificult.
i know that it is installed because i do this lsusb and get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 413c:2105 Dell Computer Corp.
Bus 004 Device 002: ID 0471:0815 Philips eHome Infrared Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
Fedora Installation :: F12 Not Working With Riva TNT2 Model 64 Graphics Card
Nov 18, 2009After a fresh install of F12 on pc with Riva TNT2 Model 64 graphics card, Login hangs once booted.
Worked fine on f11.
Ubuntu Installation :: 10.04 Netbook Remix On Acer Aspire One Zg5 Model - Error: No Such Device
Jul 30, 2010I just tried to install ubuntu 10.04 to the hard drive of my netbook as i prefer it greatly over the standard linpus one. The operating system booted fine from a bootable usb drive and so i thought if i install it it should run.
so...i got to work installing the system...it completed and asked me to restart, which i did. From there the boot up screen comes on for the pc.....the one where it says press f2 for setup and f12 for boot priority....then goes to a black screen. on this black screen i have a message which says...
"error: no such device: 992fddd7-54c1-45e0-b990-7220c6fa9005 grub rescue>"
Debian :: Need Printer - Any New HP Model?
Oct 14, 2010So my 8 year old HP has finally bit the dust. Any opinions on a new HP model?
View 14 Replies View RelatedDebian :: Use Encryption Other Than The SSL Model?
Jul 17, 2011I don't care for domain 'authentication' by an "Authority". I don't trust no one, so CA's to me are as trustworthy as the gypsy in the park.
I can use a self-signed certificate, but the problem is most browsers makers are Fn idiots that say the connection is not secure, when it actually is, but because I did not folk out cash, it makes my website look bad. I can understand the need for a 3rd party to verify the domain host to prevent man in the middle attacks, but I do not care for this.. and browser makers should take more responsibility and introduce different padlocks for types of authentication, rather than saying "this connection is encrypted, but not secure because its self-signed". What a load of horse s***!
How many times does people stop to read certificate authoraties? I sure don't. I only care weather or not the connection has been encrypted.. so, I am looking for a way for simply providing encryption for my website.
From what I understand, when you submit a CSR to a CA, it includes the private key, meaning that the CA would be able to see the encrypt data, should they get hold of it. This is not acceptable for me.
Is there anything other way to use encryption other than the SSL model that is used typically amongst HTTPS browsers today?
Ubuntu :: Particular Brand Or Model Can't Recommend?
Sep 20, 2010Currently I have a 500gb drive with Ubuntu on half of it. The other half is a soon to be Win7 install. I just picked up an identical drive for real cheap last week and I am interested in advice for going about setting up a RAID 1 for redundancy. My first road block is do I want software or hardware RAID? Is this even possible with a dualboot system? If hardware RAID is the way to go does anyone have a particular brand or model they could recommend?
View 2 Replies View RelatedGeneral :: How To Fix Partitions In Rescue Model
Aug 29, 2010My Centos disk was full. when I remove all the big files, df and du command not show right size. I reboot my server and in to rescue mode, it alert "you don't have any linux partitions".How do I fix it?I not use LVM.my server mount:
/dev/sda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
[code]....
Slackware :: Learn The Development Model?
Apr 15, 2010I am a slackware user from slackware 9.1, these years I tried many distributions, but slackware always winner. I am familiar with server configuration and desktop setup for slackware, but I know nothing about the development model of slackware, is there a way to learn the development model of slackware?
Like, freebsd, you can checkout the kernel source, tool chains source from cvs then build it, some people will commit and check in the change sets, they have a mailing list for developers to talk about the development, for users to learn what are they doing now.
I know there are many README or Documents for slackware, but I donot know anything about internal development, is there a way? a mailing list? a source repository(cvs/git or others?)
Slackware :: Server Brand And Model For 13?
Jun 8, 2010am thinking of buying new server that is tested in slackware for my company. as file server web server mail server and a capability of multiple hardisk (sas technology)to be use as san server in the future any recommadation?
View 1 Replies View RelatedHardware :: Check Make And Model Of A Modem?
Sep 5, 2010I have an old external serial modem without indication of make and model.
View 2 Replies View RelatedUbuntu :: Getting Model Of Monitors Connected To Computer?
Jul 19, 2010I am currently developing an small program in Python and at a certain point, I need to do some "stuff" depending on the monitors that are connected to the computer. I have an intel vga card with two outputs. I want to do something if one of the screens connected to the output is a "Dell", another something if one of the monitors is a "Nec" and another something if both monitors are connected.
So the question is: Is there any way to get the vendor/model of the monitors currently connected to the computer? I did a little bit testing. I plugged both screens to my vga card (the Nec to the HDMI output and the Dell to the DVI output), and the gnome-display-properties tool properly detected the model, size, resolution... of both screens connected. I would like to know if I can use a command on bash (or a library in python) to get the same information.
The /var/log/Xorg.0.log also shows properly:
(II) intel(0): EDID vendor "NEC", prod id 26345
(II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "DEL", prod id 41027
I could always parse that file, but it is not the best solution. I also tried the ddprobe command, but for some reason, it only detects one of the screens (the Dell, connected to a DVI cable). I am currently using Ubuntu 9.04 and Python2.4 (just in case it's relevant).
Hardware :: Get Serial Number And Model Of USB Drives?
Feb 7, 2011I have Ubuntu 10.04 LTS. I have a script that prompts you to insert a USB HDD/memory stick then it needs to determine its serial and model and save it to a file. The script can determine the device file of the inserted drive(ex: /dev/sdc) and if hdparm -I /dev/sdc works then all is ok. The problem is that not all USB HDDs/memory sticks work with hdparm. When it does not work I get the following:
Code:
root@izghitu:~# hdparm -I /dev/sdc
/dev/sdc:
HDIO_DRIVE_CMD(identify) failed: Invalid exchange
The other command to get the serial for USB devices of any kind is lsusb -v or lsusb -D /path/to/bus/address The problem of the first one(lsusb -v) is that it lists all USB devices and there's no way for me to script it to detect the inserted USB drive/memory stick and get the serial/model for it. The problem with the second one(lsusb -D /path/to/bus/address) is that I do not know how to get the correct USB bus address of the inserted USB drive/memory stick.
Is there any other way to get the serial number/model of a USB HDD/memory stick using its /dev/sdc device file? Is there any way to link the /dev/sdc device file with the /dev/bus/usb/address device file so I can then use the lsusb -D command to get the required info?
Hardware :: Scan From The Document Feeder Get Another Model?
Jan 11, 2011I have an Epson Workforce 520 all in one that sane recognizes. If I tell sane ( via Simple Scan in Mint Linux ) to scan it scans only from the flatbed. I'm pretty lost here. I want to scan from the document feeder. Do I need to get another model? If so, which would work. I searched the sane hardware compatibility list, but it is not easy to determine if a scanner's ADF works from that list..
View 1 Replies View RelatedGeneral :: Find The Qlogin Hba Card Model No?
Jun 20, 2010i have install a new qlogic hba card, but i dont know its model
View 1 Replies View RelatedProgramming :: How To Pull Node Pointers Out Of The Model
Mar 25, 2010I am trying to find a way to pull Node Pointers out of the model, for use in other areas of the program. The solution is probably simple but I haven't had any luck finding it.
Model for a QTreeView:
Code:
class testModel : public QAbstractItemModel
{
public:
testModel();
~testModel();
[code]....
Red Hat :: Command To Find System Make And Model?
Jan 27, 2011Is there any command to find system make and model in linux like how solaris shows "Netra X4200" when we give command "uname -a"
View 1 Replies View RelatedDebian :: Choose Keyboard Model In Gnome Shell?
Jul 24, 2011I've recently upgraded my squeeze to sid, then installed gnome shell as default window manager.
1. Gnome shell was normal until yesterday, I upgraded new packages up to date, then I cannot log into gnome shell any more (however, fallback mode is normal). It shows a sad computer screen with message "Oh no, something has gone wrong". The only thing I can do is pressing the logout button to log out.
2. Debian is running on my thinkpad T60p, and I can choose keyboard model in Gnome2, but I can't find any options in the system setting in Gnome shell to change keyboard layout for model IBM T60/R60.
Fedora Hardware :: HP All-in-one Printer Model HP Deskjet F2483?
Jul 20, 2010I have recently acquired me a HP all-in-one printer model HP Deskjet F2483. The printer works fine but am having issues getting the scanner to work. Following instructions I found to Google, this is what my shell looks like:
Code:
sh-4.0$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
[Code]...
General :: Unable To Model The Power Consumption Of Various Components
Aug 3, 2011I am working on a traffic surveillance project which performs various image processing tasks with a number of visual sensors and a computing platform. My basic task in the project is the power optimization/management. I am using a ZOTAC-IONITX computing platform (Intel ATOM CPU + NVIDIA ION GPU). The problems that I am currently facing are:
I am unable to model the power consumption of various components e.g., processor, GPU, hard drive, memory etc, since there seems to be no way to measure the power consumption of individual system components. Since I don't have a power consumption model, I cannot come up with a power optimization algorithm. I am currently working on Linux. Is there any way to measure/model the power consumption of individual system component?
I have already checked powertop. It doesn't tells the power (watts) consumed by a component (e.g., microprocessor). It just gives information about the power state the processor is in (However there is no way to change the power state by the user) and the processors that cause processor to wakeup.
Ubuntu :: Belkin USb Model F6d4050 And Dlink 655 Router?
Feb 13, 2010How do I get my ubuntu 9.04 computer to recognise the USB wireless stick and then connect to my wireless d_link router?
View 1 Replies View RelatedUbuntu Networking :: Trying To Install WebConnect Jet Model UMG1691
Jun 25, 2010I'm trying to install a webConnect Jet Model UMG1691 on to my laptop running UBUNTU version 9.10. I'm using T-mobile as the ISP. I'm new to the LINUX world so you'll have to explain it to me like I'm 3 years old if there's going to be a lot of terminal jargon.
View 2 Replies View RelatedUbuntu / Apple :: 10.10 And 10.04 Won't Boot On Mac Mini (mid-2010 Model)
Mar 10, 2011I've been attempting to boot Ubuntu on my Mac Mini with absolutely no success. I tried 32-bit and 64-bit versions of 10.10 and 10.04. In all cases, I see the little keyboard and man at the bottom of the screen and then the screen goes black (i.e. my monitor stops receiving input).
My monitor is connect via the HDMI-to-DVI convertor, so is this a driver issue related to that?
Ubuntu :: Move This Driver File To The Model Folder?
Apr 29, 2011I am trying to post a driver in ..../cups/model folder but it says"access denied....could not write to ....cups/model.how do i move this driver file to the model folder
View 1 Replies View RelatedGeneral :: Code Model 'kernel' Not Supported In The 32 Bit Mode?
Mar 31, 2011An error occured when I install my r8101 dirver. I have got the message:
/home/driver/r8101/src/r8101_n.c:1: error: code model 'kernel' not supported in the 32 bit mode
/home/driver/r8101/src/r8101_n.c:1: sorry, unimplemented: 64-bit mode not compiled in
make[3]: *** [/home/driver/r8101/src/r8101_n.o] Error 1
[Code]......