Fedora Hardware :: HP All-in-one Printer Model HP Deskjet F2483?
Jul 20, 2010
I have recently acquired me a HP all-in-one printer model HP Deskjet F2483. The printer works fine but am having issues getting the scanner to work. Following instructions I found to Google, this is what my shell looks like:
Code:
sh-4.0$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
[Code]...
View 11 Replies
ADVERTISEMENT
Jan 22, 2011
I installed the Printer, but Xsane does not recognize the scanner, how can i acivate the scanner. my system is Debian Lenny 507 Kde i386. I have looked through the posts in the forum, but found nothing that can help me. can somebody point me in the right
View 14 Replies
View Related
Feb 6, 2011
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies
View Related
Dec 18, 2010
I have problem with my printer HP Deskjet D1460. My printer is configured and works. When I send a file on the print, the printer clings a sheet of paper and starts to print, but a paper as was clean so clean and remains, after printing.
View 2 Replies
View Related
Dec 23, 2010
When I go to System->Administration->Printing no window pops up. Down on the bottom panel it says "Starting Printing" and then goes away. I'm trying to install my HP Deskjet printer,
View 3 Replies
View Related
Oct 14, 2010
So my 8 year old HP has finally bit the dust. Any opinions on a new HP model?
View 14 Replies
View Related
Jul 7, 2011
After clicking on the print option on ms -word, printer does not respond! In the print dialogue box it shows that ink cartridge empty, but even after refilling it, it shows the same status!
View 1 Replies
View Related
Nov 24, 2010
Ubuntu 1010 64bit
HP Deskjet 5740 USB interface
The printing has been running without problem ever since the installation of this box at least >1 year. Today I found it stop working with following warning:
Code:
Filter /usr/lib/cups/filter/hpcups for printer Deskjet-5700 not available
View 6 Replies
View Related
Mar 14, 2011
I'm running a standard 13.1 32 bit install with an HP deskjet 990C, run off of USB. Until today everything has printed properly. Now nothing prints. Nothing has been installed unless it came through slackpkg, and yes it is still on the correct setting for arch and revision. CUPS shows printer as installed, accepting jobs an idle. No error messages are appearing but nothing is reaching the printer. The info I can glean is from the error logs in CUPS:
[Code]....
View 4 Replies
View Related
Aug 5, 2010
My HP Deskjet D-2660 will not print. I can print to file but not the printer. I am running Ubuntu 10.04 and have no other problems. I have installed hpip and hpijs form HP and cups was made available via and upgrade. I have a lot of data from var/log/cups/error_log but don't know what it is supposed to say.
I can print to file and everything else I check seems to say that all is right. Is there any glaring faults that I should look for?? As I stated on the other post I get a message that the print job has been sent to the printer and then another message stating that the print job has completed. In system/administration/printing, the printer shows up properly and has a green check mark on it. Connected to localhost shows at the bottom of the little window. Under /printer it shows shared and enabled Then under printer/properties, it shows as the HP Deskjet D2600 series the location is given as john-desktop It defines the Device URI: hp:/usb/Deskjet_D2600_series?serial=CN9ANDF0ZT05C9 shows the Make and Model HP Deskjet d2600 Series hpijs,.. printer state: idle
Across the bottom it theoretically allows you to print a test page or clean the print heads. (won't print) On the printing-local host small page that opens under system/administration/printing there is no group under that heading only new group or new group from selection. I never named a group since I am the only user.
I have shut the printer down and disconnected the USB and rebooted. Then connect the power and plug in the USB cable I get all the same answers nothing appears to change. Here is some of the var/log/cups/error_log file. It does this over and over every minute same thing. The print que is empty from both administration and applications.
[Code]....
View 2 Replies
View Related
Jul 27, 2010
I want to install printer HP Deskjet k209 in Debian Lenny but i am unable to install because printer driver is not available in this distribution..
View 2 Replies
View Related
Jan 13, 2011
I'm trying to install hp DeskJet 6500 printer on a network.
My Centos version is
Linux xxxxx 2.6.18-194.26.1.el5xen #1 SMP Tue Nov 9 13:35:30 EST 2010 x86_64 x86_64 x86_64 GNU/Linux
Ofcourse My printer model is not showing up on the list of printer list when using ipp based configuration.
so while searching around, I came across article to install hplip at
[URL]
and I tried to install the following hplip version with centos.
[URL]
Running the configure with following arguments
./configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib64 --prefix=/usr --enable-qt4 --enable-doc-build --enable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-policykit --disable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build
I get following error
configure: error: cannot find net-snmp support (or --disable-network-build)
But net-snmp is installed on my system, so, I tried with disable-network-build and tried to get around the problem, the next error I get is
checking for usb_init in -lusb... no
configure: error: cannot find libusb support
View 14 Replies
View Related
Jul 10, 2010
FC13-i686/KDE
Can't install a HP Deskjet F4140 in FC13.
I have installed;
1. All Cups rpm's
2. Gutenprint-cups
3. All the hplip rpms
4. hpijs
And I still can't get the HP Deskjet F4140 to show up in Selection Window. I have even run HP-Setup and it can't install the F4140 . HP-Setup can see the F4140 is on USB port but can't install it.
I went to the HP website and it says the printer is Supported in the hplip drivers
View 5 Replies
View Related
Aug 19, 2010
I have an old, but still usable, HP Deskjet Plus inkjet printer that I have connected to the parallel port of my Fedora 13 box. I can (apparently) configure the printer using the usual print configuration tools, and have selected the recommend foomatic driver (HP DeskJet Plus Foomatic/pcl3 (recommended)) - but when I try to print the test page the job gets queued and nothing else happens. The jobs simply show as pending in the printer queue.
Current uri is parallel:/dev/lp0.
As a side note, my Epson printer on the USB port works fine, but it's using CUPS + Gutenprint v5.2.6 Simplified. Should I be trying something with a different (e.g. CUPS) driver, or a different way of specifying the foomatic driver, or what?
View 3 Replies
View Related
Sep 3, 2010
It's been awhile since I last used my printer in F12. There have been a lot of updates via yum done since whenever that last time was so I don't know precisely which update and when broke things. Attempting to use it today was a no go. It would appear to be a 'udev' issue according to last message logged into /var/log/messages.
My wife's Windows computer is connected to same printer via a parallel cable and it works fine for her so it's not a hardware failure.Consider this solved. Reason for printer failure: Major OP error. The solution was actually rather simple: sudo service cups start
View 2 Replies
View Related
Dec 31, 2010
I've installed F14 [32 bit] and trying to configure a HP DeskJet 812C on my local netowrk[lpd://192.168.1.35/PASSTHRU] However, the "New Printer" wizard calls KPackageKit that fails and reports, "Could not find printer driver in any configured software source". It is just a dead end!
View 2 Replies
View Related
Apr 17, 2011
I can't get the scanner to work. I get this:
[pedroski@fangshan ~]$ scanimage -L
device `v4l:/dev/video0' is a Noname USB2.0 1.3M UVC WebCam virtual device
device `hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW' is a Hewlett-Packard Deskjet_1050_J410_series all-in-one
and this
[pedroski@fangshan ~]$ scanimage -d hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW -T
scanimage: open of device hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW failed: Device busy.
Fedora came with 'Simple Scan' That also returns 'device busy'. Can this scanner work under Fedora? I have tried turning it off, then on. I have rebooted. I have hpijs and hplip installed also hplip-gui. I have put myself in the group lp.
View 14 Replies
View Related
Aug 7, 2011
I have a HP Deskjet 3050 printer. In the past (when i used windows) i installed this printer as a networkprinter. However now in Fedora 15 i cant get it to run.
View 2 Replies
View Related
Feb 9, 2010
I had set up a newly purchased HP F4488 using HPLIP, I installed it on my Fedora 10 desktop and it worked fine for the past 2 days. Suddenly, it is failing to print. The scanner works and the photocopier works. When a print job is initialized there is an error and the printer gets disabled.
View 3 Replies
View Related
May 27, 2009
I have installed fedora 10 with mythtv. at some point the remote control was working then i had to reimage the computer again. Now the remote wont work Im not a linux guru this is why is so dificult.
i know that it is installed because i do this lsusb and get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 413c:2105 Dell Computer Corp.
Bus 004 Device 002: ID 0471:0815 Philips eHome Infrared Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
View 1 Replies
View Related
Nov 18, 2009
After a fresh install of F12 on pc with Riva TNT2 Model 64 graphics card, Login hangs once booted.
Worked fine on f11.
View 13 Replies
View Related
Oct 7, 2010
How can I determine full compliance:
Input data see below.
Code:
Code:
Code:
Result - ethernet devices about which I know the exact information :
Code:
View 3 Replies
View Related
Dec 26, 2009
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
View 3 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Jan 9, 2010
I updated to the recent 9.10 version of Ubuntu and found that my printer no longer works. When trying to print, the printer just blinks and *occasionally* makes a noise and prints out a partial line of text or whatever. It's a USB connecting HP Deskjet D1420 that is not a network printer and does not need to be networked.
[Code]...
View 6 Replies
View Related
May 31, 2010
I seem to be having on going issues with my printer. I was able to print a garbled test page but I get a result from terminal of printer HP-Deskjet-f2400 now printing HP-Deskjet-f2400-0. enabled since Mon May 31 15:45:04 2010 Connecting to printer... and it just sits there. Nothing is in error with the printer itself though.
I have enabled 2 screenshots.
View 9 Replies
View Related
Aug 16, 2010
I recently installed Ubuntu 10.04 on my computer. Everything works except for my HP Deskjet D2660 printer. The printer is recognized, but it will not print. HP-check shows no errors or warnings. The printer works fine on another computer with Ubuntu 9.10
View 4 Replies
View Related
Apr 26, 2010
I have spent a few hours on this, trying various combinations of instructions. The nearest I got was when I followed the instructions from the HPLIP site, but it ended up with telling me some dependencies were not installed. I installed them using the Mintinstall tool, but still no go.
Before I spend any more time on this, I would like to know if there is a user out there who has got this particular printer to run on the Mint 7 distribution? If somebody has, then I know it is at least possible, and I will persevere!
View 6 Replies
View Related
